In non-64-bit mode, CS segment base address should be considered when
determining the linear address of the vcpu's instruction pointer. Use
vie_calculate_gla() for instruction address translation which also takes
care of 64-bit mode.
Tracked-On: #4064
Signed-off-by: Peter Fang <peter.fang@intel.com>
MISRA C requires specified bounds for arrays declaration, previous declaration
of platform_clos_array in board.h does not meet the requirement.
Tracked-On: #3987
Signed-off-by: Victor Sun <victor.sun@intel.com>
Remove redundant DMAR MACROs for given platform_acpi_info files because
CONFIG_ACPI_PARSE_ENABLED is enabled for all boards by default. The DMAR
info for nuc7i7dnb is kept as reference in the case that ACPI_PARSE_ENABLED
is not set in Kconfig.
As DMAR info is not provided for apl-mrb, the platform_acpi_info.h under
apl-mrb config folder is meaningless, so also remove this file and let
hypervisor parse ACPI for apl-mrb;
Tracked-On: #3977
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The DMAR info is board specific so move the structure definition to board.c.
As a configruation file, the whole board.c could be generated by acrn-config
tool for each board.
Please note we only provide DMAR info MACROs for nuc7i7dnb board. For other
boards, ACPI_PARSE_ENABLED must be set to y in Kconfig to let hypervisor parse
DMAR info, or use acrn-config tool to generate DMAR info MACROs if user won't
enable ACPI parse code for FuSa consideration.
The patch also moves the function of get_dmar_info() to vtd.c, so dmar_info.c
could be removed.
Tracked-On: #3977
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The value of CONFIG_MAX_IOMMU and MAX_DRHDS are identical to DRHD_COUNT
which defined in platform ACPI table, so remove CONFIG_MAX_IOMMU_NUM
from Kconfig and link these three MACROs together.
Tracked-On: #3977
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
hypcall_id has a type of uint64_t and should use 'llx' as
formatting flag instead of '%d'. Otherwise, we will get a
confusing error log when not-allowed hypercall occurs.
Without this patch:
[96707209us][cpu=1][sev=3][seq=2386]:hypercall -2147483548 is only allowed from SOS_VM!
With this patch:
[84613395us][cpu=1][sev=3][seq=2136]:hypercall 0x80000064 is only allowed from SOS_VM!
So, we can figure out which not-allowed hypercall has been triggered more conveniently.
BTW, this patch adds hypcall_id which triggered from non-ring0 into error log.
Tracked-On: #4012
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Now the default board memory size is 16 GB. However, ACRN support more and more boards
which may have memory size large than 16 GB. This patch try to filter e820 table which
is over top address space.
Tracked-On: #4007
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Now the e820 structure store ACRN HV memory layout, not the physical memory layout.
Rename e820 to hv_hv_e820 to show this explicitly.
Tracked-On: #4007
Signed-off-by: Li Fei1 <fei1.li@intel.com>
AP trampoline code should be accessible
to hypervisor only, this patch is to unmap
this region from service VM's EPT for security
reason.
Tracked-On: #3992
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Fei Li <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
1. Print warning message instead of ASSERT when
the caller try to modify the attribute for
memory region that is not present.
2. To avoid above warning message for memory region
below 1M,its attribute may be updated by Service
VM when updating MTTR setting.
Tracked-On: #3992
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Fei Li <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Currently, memory with size of 'CONFIG_LOW_RAM_SIZE' will be
allocated when 'get_direct_boot_ap_trampoline()' is called.
This patch refine the implementation of of above function, it
returns the base address of trampoline buffer when called, and
the memory is allocated when vboot module is initialized.
Tracked-On: #3992
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Fei Li <fei1.li@intel.com>
We should use INIT signal to notify the vcpu threads when
powering off the hard RTVM. To achive this, we should set
the vcpu->thread_obj.notify_mode as SCHED_NOTIFY_INIT.
Patch (27163df9 hv: sched: add sleep/wake for thread object)
tries to set the notify_mode according `is_lapic_pt_enabled(vcpu)`
in function prepare_vcpu. But at this point, the is_lapic_pt_enabled(vcpu)
will always return false. Consequently, it will set notify_mode
as SCHED_NOTIFY_IPI. Then leads to the failure of powering off
hard RTVM.
This patch fixes it by:
- Initialize the notify_mode as SCHED_NOTIFY_IPI in prepare_vcpu.
- Set notify_mode as SCHED_NOTIFY_INIT after guest is trying to
enable x2apic mode of passthru lapic.
Tracked-On: #3975
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Yan, Like <like.yan@intel.com>
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
After adding PCI BAR remap support, mmio_node may unregister when there's others
access it. This patch add a lock to protect mmio_node access.
Tracked-On: #3475
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Concurrent access on PCI device may happened if UOS try to access PCI configuration
space on different vCPUs through IO port. This patch just adds a global PCI lock for
each VM to prevent the concurrent access.
Tracked-On: #3475
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Refine PCI CONFIG_ADDRESS Register definition as its physical layout.
In this case, we could read/write PCI CONFIG_ADDRESS Register atomically.
Tracked-On: #3475
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Unmap old mappings in vdev_pt_write_vbar explicitly before set_vbar_base.
Then map new mappings explicitly in vdev_pt_write_vbar.
Tracked-On: #3475
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Since guest could re-program PCI device MSI-X table BAR, we should add mmio
emulation handler unregister.
However, after add unregister_mmio_emulation_handler API, emul_mmio_regions
is no longer accurate. Just replace it with max_emul_mmio_regions which records
the max index of the emul_mmio_node.
Tracked-On: #3475
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
In theory, guest could re-program PCI BAR address to any address. However, ACRN
hypervisor only support [0, top_address_space) EPT memory mapping. So we need to
check whether the PCI BAR re-program address is within this scope.
Tracked-On: #3475
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
ACRN currently uses 2MB large pages in the page tables setup
for trampoline code and data. This patch lets ACRN use 1GB large
pages instead.
When it comes to fixing symbols in trampoline code, fixing pointers
in PDPT is no more needed as PDPT PTEs contain Physical Address.
Tracked-On: #3899
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch makes the following changes:
- Remove the 4th VM
- Make the default vcpu num of RTVM as 2
---
v1 -> v2: Modify CONFIG_MAX_VM_NUM to 3U + KATA
Tracked-On: #3925
Signed-off-by: Yan, Like <like.yan@intel.com>
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
kick means to notify one thread_object. If the target thread object is
running, send a IPI to notify it; if the target thread object is
runnable, make reschedule on it.
Also add kick_vcpu API in vcpu layer to notify vcpu.
Tracked-On: #3813
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
After moving softirq to following interrupt path, softirq handler might
break in the schedule spinlock context and try to grab the lock again,
then deadlock.
Disable interrupt with schedule spinlock context.
For the IRQ disable/restore operations:
CPU_INT_ALL_DISABLE(&rflag)
CPU_INT_ALL_RESTORE(rflag)
each takes 50~60 cycles.
renaming: get_schedule_lock -> obtain_schedule_lock
Tracked-On: #3813
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Clean up do_swtich and do switch related things in schedule().
Tracked-On: #3813
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch decouple some scheduling logic and abstract into a scheduler.
Then we have scheduler, schedule framework. From modulization
perspective, schedule framework provides some APIs for other layers to
use, also interact with scheduler through scheduler interaces.
Tracked-On: #3813
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
To get pcpu_id from sched_control quickly and easier.
Tracked-On: #3813
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
- The default behaviors of PIO & MMIO handlers are same
for all VMs, no need to expose dedicated APIs to register
default hanlders for SOS and prelaunched VM.
Tracked-On: #3904
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
'info.pmsi_addr' may be written to physicall device's
PCI configuration field without initialization when
'enable' is false in 'vmsi_remap()'.
this patch is to fix above issues, 'PCIR_MSI_ADDR'
and 'PCIR_MSI_ADDR_HIGH' only be programmed when
'enable' is true.
Tracked-On: #3903
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Currently the parameter of init_ept_mem_ops is
'struct acrn_vm *vm' for this api,change it to
'struct memory_ops *mem_ops' and 'vm_id' to avoid
the reversed dependency, page.c is hardware layer and vm structure
is its upper-layer stuff.
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Let init thread end with run_idle_thread(), then idle thread take over and
start to do scheduling.
Change enter_guest_mode() to init_guest_mode() as run_idle_thread() is removed
out of it. Also add run_thread() in schedule module to run
thread_object's thread loop directly.
rename: switch_to_idle -> run_idle_thread
Tracked-On: #3813
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
sleep one thread_object means to prevent it from being scheduled.
wake one thread_object is an opposite operation of sleep.
This patch also add notify_mode in thread_object to indicate how to
deliver the request.
Tracked-On: #3813
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Now, we have three valid status for thread_object:
THREAD_STS_RUNNING,
THREAD_STS_RUNNABLE,
THREAD_STS_BLOCKED.
This patch also provide several helpers to check the thread's status and
a status set wrapper function.
Tracked-On: #3813
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
schedule infrastructure is per pcpu, so move its initialization to each
pcpu's initialization.
Tracked-On: #3813
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
To support cpu sharing, multiple vcpu can run on same pcpu. We need do
necessary vcpu context switch. This patch add below actions in context
switch.
1) fxsave/fxrstor;
2) save/restore MSRs: MSR_IA32_STAR, MSR_IA32_LSTAR,
MSR_IA32_FMASK, MSR_IA32_KERNEL_GS_BASE;
3) switch vmcs.
Tracked-On: #3813
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
With cpu sharing enabled, per_cpu vcpu cannot work properly as we might
has multiple vcpus running on one pcpu.
Add a schedule API sched_get_current to get current thread_object on
specific pcpu, also add a vcpu API get_running_vcpu to get corresponding
vcpu of the thread_object.
Tracked-On: #3813
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
With cpu sharing enabled, we will map acrn_vcpu to thread_object
in scheduling. From modulization perspective, we'd better hide the
pcpu_id in acrn_vcpu and move it to thread_object.
Tracked-On: #3813
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
vcpu thread's stack shouldn't follow reset_vcpu to reset.
There is also a bug here:
while vcpu B thread set vcpu->running to false, other vcpu A thread
will treat the vcpu B is paused while it has not been switch out
completely, then reset_vcpu will reset the vcpu B thread's stack and
corrupt its running context.
This patch will remove the vcpu thread's stack reset from reset_vcpu.
With the change, we need do init_vmcs between vcpu startup address be
settled and scheduled in. And switch_to_idle() is not needed anymore
as S3 thread's stack will not be reset.
Tracked-On: #3813
Signed-off-by: Fengwei Yin <fengwei.yin@intel.com>
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Two time related synthetic MSRs are implemented in this patch. Both of
them are partition wide MSR.
- HV_X64_MSR_TIME_REF_COUNT is read only and it is used to return the
partition's reference counter value in 100ns units.
- HV_X64_MSR_REFERENCE_TSC is used to set/get the reference TSC page,
a sequence number, an offset and a multiplier are defined in this
page by hypervisor and guest OS can use them to calculate the
normalized reference time since partition creation, in 100ns units.
Tracked-On: #3831
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
This patch implements the minimum set of TLFS functionality. It
includes 6 vCPUID leaves and 3 vMSRs.
- 0x40000001 Hypervisor Vendor-Neutral Interface Identification
- 0x40000002 Hypervisor System Identity
- 0x40000003 Hypervisor Feature Identification
- 0x40000004 Implementation Recommendations
- 0x40000005 Hypervisor Implementation Limits
- 0x40000006 Implementation Hardware Features
- HV_X64_MSR_GUEST_OS_ID Reporting the guest OS identity
- HV_X64_MSR_HYPERCALL Establishing the hypercall interface
- HV_X64_MSR_VP_INDEX Retrieve the vCPU ID from hypervisor
Tracked-On: #3832
Signed-off-by: wenwumax <wenwux.ma@intel.com>
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Change i915.domain_plane_owners and i915.avail_planes_per_pipe for
hybrid scenario;because some User vm(like:Ubuntu/Debian and WaaG)
doesn't support plane restriction; it will use PipeA by default.
Tracked-On: #3840
Signed-off-by: fuzhongl <fuzhong.liu@intel.com>
Consider the following case when TPR shadow is used with vlapic
basic mode:
1) 2 interrupts are pending in vlapic. INTa's priority > TPR and
INTb's priority <= TPR.
2) TPR threshold is set to zero and INTa is injected to guest.
3) Guest set TPR to the priority of INTa.
4) EOI of INTa. PPR is updated to TPR which equals INTa's priority.
INTb cannot be injected because its priority <= PPR.
5) Guest set TPR to zero. Because TPR threshold is still zero, there is
no TPR threshold vmexit. But since both TPR and ISRV are zero at
this time, the PPR is zero as well. INTb still cannot be injected.
This is a bug.
By adding vcpu_make_request(vlapic->vcpu, ACRN_REQUEST_EVENT) in EOI,
TPR threshold will be updated before vm_resume.
Tracked-On: #3795
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Currently we are using a 1:1 mapping logic for pcpu:vcpu. So don't need
a runqueue for it. Removing it as preparation work to abstract scheduler
framework.
Tracked-On: #3813
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
PRMRR related MSRs need to be configured by platform BIOS / bootloader.
These settings are not allowed to be changed by guest.
VMs currently have no requirement to access these MSRs even when vSGX is enabled.
So, this patch disables PRMRR related MSRs in VM.
Tracked-On: #3739
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
--remove unnecessary includes
--remove unnecssary forward-declaration for 'struct vhm_request'
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
The MSI Message Address and Message Data have no valid data after Power-ON. So
there's no need to initialize them by reading the data from physical PCI configuration
space.
Tracked-On: #3475
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
this patch is to fix error debug message
for invalid 'param' case, there is no string
variable for '%s' output, which will potenially
trigger hypervisor crash as it may access random
memroy address and trigger SMAP violation.
Tracked-On: #3801
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
We only support Type 0 and Type 1 PCI device. Remove PC-Card type support which
was originally described in the [PC-Card] and is used in previous versions of
the programming model.
Tracked-On: #3475
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
When a VM is configured with LAPIC PT mode and its vCPU is in x2APIC
mode, the corresponding pCPU needs to be reset during VM shutdown/reset
as its physical LAPIC was used by its guest.
This commit fixes an issue where this reset never happens.
is_lapic_pt_enabled() needs to be called before reset_vcpu() to be able
to correctly reflect a vCPU's APIC mode.
A vCPU with LAPIC PT mode but in xAPIC mode does not require such reset,
since its physical LAPIC was not touched by its guest directly.
v2 -> v3:
- refine edge case detection logic
v1 -> v2:
- use a separate function to return the bitmap of LAPIC PT enabled pCPUs
Tracked-On: #3708
Signed-off-by: Peter Fang <peter.fang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Reviewed-by: Jack Ren <jack.ren@intel.com>
it uses builtin function(__builtin_popcountl)in bitmap_weight(),
it will use the 'popcnt' instruction,
this patch enable 'popcnt' instruction support in Makefile
Tracked-On: #3663
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
- update the function argument type to union
Declaring argument as pointer is not necessary since it
only does the comparison.
Tracked-On: #1842
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
To enable static configuration of different scenarios, we configure VMs
in HV code and prepare all nesserary resources for this VM in create VM
hypercall. It means when we create one VM through hypercall, HV will
read all its configuration and run it automatically.
Tracked-On: #3663
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
As we introduced vcpu_affinity[] to assign vcpus to different pcpus, the
old policy and functions are not needed. Remove them.
Tracked-On: #3663
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add this vcpu_affinity[] for each VM to indicate the assignment policy.
With it, pcpu_bitmap is not needed, so remove it from vm_config.
Instead, vcpu_affinity is a must for each VM.
This patch also add some sanitize check of vcpu_affinity[]. Here are
some rules:
1) only one bit can be set for each vcpu_affinity of vcpu.
2) two vcpus in same VM cannot be set with same vcpu_affinity.
3) vcpu_affinity cannot be set to the pcpu which used by pre-launched VM.
v4: config SDC with CONFIG_MAX_KATA_VM_NUM
v5: config SDC with CONFIG_MAX_PCPU_NUM
Tracked-On: #3663
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
There is plan that define each VM configuration statically in HV and let
DM just do VM creating and destroying. So DM need get vcpu_num
information when VM creating.
This patch return the vcpu_num via the API param. And also initial the
VMs' cpu_num for existing scenarios.
Tracked-On: #3663
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
MAX_PCPU_NUM is different on various BOARDs. So we move the generic
definition from Kconfig to each board's config header file.
Tracked-On: #3663
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Sometimes we need know the number of 1 in one bitmap. This patch provide
a inline function bitmap_weight for it.
Tracked-On: #3663
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Now, we create vcpus while VM being created in hypervisor. The
create vcpu hypercall will not be used any more. For compatbility,
keep the hypercall HC_CREATE_VCPU do nothing.
v4: Don't remove HC_CREATE_VCPU hypercall, let it do nothing.
Tracked-On: #3663
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
it will panic if phys_cpu_num > CONFIG_MAX_PCPU_NUM
during init_pcpu_pre,after that no need to check it again.
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
C99 supports variable-length array,
but misra-c required "variable-length array types shall not be used"
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
No need to memset since it will overwrite the memory
by copy_from_gpa in some cases.
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Initialize vBAR configure space when doing vPCI BAR initialization. At this time,
we access the physical device as we needs, no need to cache physical PCI device
BAR information beforehand.
Tracked-On: #3475
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Add " with acrn-config" tag in build info when user build hypervisor with
acrn-config xmls would be helpful to identify the hypervisor configuration
in current build is from acrn-config xml or from source code.
Tracked-On: #3602
Signed-off-by: Victor Sun <victor.sun@intel.com>
Previously we generate config patch based on config xml in toplevel Makefile,
it brings two issues:
1. we could not generate xml configuration patch with hypervisor source only;
2. The github commit info of current code base which is defined in version.h
will be overwritten by the new generated config patch, then the lost commit
info would impact build identify and bug reproducing.
This patch fixed these two issues. Besides, the patch also modify the logic of
platform_acpi_info file existence judgement, which need to be depends on the
acrn-config patch.
Tracked-On: #3602
Signed-off-by: Victor Sun <victor.sun@intel.com>
TSC would be reset to 0 when enter suspend state on some platform.
This will fail the secure timer checking in secure world because
secure world leverage the TSC as source of secure timer which should
be increased monotonously.
This patch save/restore TSC in host suspend/resume path to guarantee
the mono increasing TSC.
Note: There should no timer setup before TSC resumed.
Tracked-On: #3697
Signed-off-by: Qi Yadong <yadong.qi@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
1. if SCENARIO=$(SCENARIO) is specified in make param, then override
the default CONFIG_$(SCENARIO) value in existed .config. This means
we don't need to modify the default SCENARIO config in Kconfig file
to build the hypervisor;
2. Some board name shortcuts like apl-nuc/kbl-nuc-i7 need to be converted
to official board name to make sure overrides working;
3. Previously make sbl-hypervisor did not load the defconfig so the
defconfig for boards are lost, this patch fix this issue;
4. remove SCENARIO param when make hypervisor, because SCENARIO could
be got from SCENARIO_NAME which parsed from .config;
Tracked-On: #3593
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
The orignal communication port will lose data when tx is too fast, and
the data in FIFO will be overwritten.
Now, when the FIFO is full, stop sending more data. When the FIFO is not
full, notify the vuart to send more data.
Tracked-On: #3681
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
For communication vuart, when it send data to target vuart's fifo, it
should meet the conditions:
1. MCR_LOOPBACK is not set
2. LCR_DLAB is not set
3. access reg is UART16550_THR
4. target_vu is not null
But the LCR_DLAB is missed now, and when vuart set it's UART16550_DLL,
it will be send to target by mistake as UART16550_DLL = UART16550_THR.
Add the missed condition.
DLAB in uart16550 spec:
Divisor Latch Access Bit.
1 = Allows access to the Divisor Latch Registers and reading of the FIFO
Control Register.
0 = Allows access to RBR, THR, IER and IIR registers.
Tracked-On: #3681
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@Intel.com>
Reserve memory for hv sbuf to avoid its possible overwriting on kernel memory.
For apl-up2, move hv_log address to 0x5de00000 to avoid possible conflict with
HV_RAM which start from 0x5e000000;
For nuc6cayh, move HV_RAM_START to 0x20000000 to avoid possible conflict with
hv_log which start from 0x1fe00000;
Tracked-On: #3533
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
In "commit 6ebc22" the vPCI device initialize sequence is wrong changed. This patch
tries to revert it.
Tracked-On: #3475
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
In "commit 90480d" we use a pointer new_owner to point to the actual vPCI device
for post-launched VM when this device is assigned to this post-launched VM from
SOS. However, now DM will use SOS's vmsix_table_mmio_access_handler to trap vMSI-X
table mmio access for post-launched VM. So we should use the post-launched VM's
vPCI device in this case.
Tracked-On: #3475
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Now the structures(run_context & ext_context) are defined
in vcpu.h,and they are used in the lower-layer modules(wakeup.S),
this patch move down the structures from vcpu.h to cpu.h
to avoid reversed dependency.
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Now the structures(union source & struct intr_source) are defined
in ptdev.h,they are used in vtd.c and assign.c,
vtd is the hardware layer and ptdev is the upper-layer module
from the modularization perspective, this patch move down
these structures to avoid reversed dependency.
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Using per_cpu list to record ptdev interrupts is more reasonable than
recording them per-vm. It makes dispatching such interrupts more easier
as we now do it in softirq which happens following interrupt context of
each pcpu.
Tracked-On: #3663
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
From modulization perspective, it's not suitable to put pcpu and vm
related request operations in schedule. So move them to pcpu and vm
module respectively. Also change need_offline return value to bool.
Tracked-On: #3663
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Now, we have assumption that SOS control whether the platform
should enter S5 or not. So when SOS tries enter S5, we just
forward the S5 request to native port which make sure platform
S5 is totally aligned with SOS S5.
With higher serverity guest introduced,this assumption is not
true any more. We need to extend the platform S5 process to
handle higher severity guest:
- For DM launched RTVM, we need to make sure these guests
is off before put the whole platfrom to S5.
- For pre-launched VM, there are two cases:
* if os running in it support S5, we wait for guests off.
* if os running in it doesn't support S5, we expect it
will invoke one hypercall to notify HV to shutdown it.
NOTE: this case is not supported yet. Will add it in the
future.
Tracked-On: #3564
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Li, Fei1 <fei1.li@intel.com>
do_acpi_s3 actually not limit to do s3 operation. It depends on
the paramters pm1a_cnt_val and pm1b_cnt_val. It could be s3/s5.
Update the function name from xx_s3 to xx_sx.
Tracked-On: #3564
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Currently nuc7i7dnb board is using default platform acpi info file so causes
S3/S5 not working properly.
This patch updates the correct ACPI info for nuc7i7dnb board.
Tracked-On: #3609
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
vPCI device should use its virtual configure space to access its BAR after vPCI
device initialized.
This patch also remove corner case "vPCI device will use its 64 bits BAR high idx
to access its BAR base address".
Tracked-On: #3475
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
PCI BAR physical base address will never changed. Cache it to avoid calculating
it every time when we access it.
Tracked-On: #3475
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@Intel.com>
When we support PCI MSI-X table BAR remapping, we may re-delete the MSI-X table BAR
region. This patch removes strict check for deleting page table mapping.
Tracked-On: #3475
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
The current implement only do "only add a page table mapping for a region when
it's not mapped" check when this page table entry is a PTE entry. However, it
need to do this check for PDPTE entry and PDE entry too.
Tracked-On: #3475
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
pcpu_active_bitmap was read continuously in wait_pcpus_offline(),
acrn_vcpu->running was read continuously in pause_vcpu(),
add volatile keyword to ensure that such accesses are not
optimised away by the complier.
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
As the pr_dbg will access sbuf which will call stac/clac inside, so can
not put pr_dbg between stac/clac, it will case Page Fault.
acrn_print_request is a debug feature, and it calls pr_dbg. when the
loglevel is set to 6, there will be Page Fault.
So, remove the caller for acrn_print_request and mask the function as
unused, reserved for debug.
Tracked-On: #3648
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Reviewed-by: Yonghua Huang <yonghua.huang@intel.com>
We did following to do platform reset:
1. Try ACPI reset first if it's available
2. Then try 0xcf9 reset method
3. if 2 fails, try keyboard reset method
This introduces some timing concern which needs be handled carefully.
We change it by following:
assume the platforms which ACRN could be run on must support either
ACPI reset or 0xcf9 reset. And simplify platform reset operation
a little bit:
If ACPI reset register is generated
try ACPI reset
else
try 0xcf9 reset method
Tracked-On: #3609
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
change the input parameter from vcpu to eptp in order to let this api
more generic, no need to care normal world or secure world.
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Currently, the clos id of the cpu cores in vmx root mode is the same as non-root mode.
For RTVM, if hypervisor share the same clos id with non-root mode, the cacheline may
be polluted due to the hypervisor code execution when vmexit.
The patch adds hv_clos in vm_configurations.c
Hypervisor initializes clos setting according to hv_clos during physical cpu cores initialization.
For RTVM, MSR auto load/store areas are used to switch different settings for VMX root/non-root
mode for RTVM.
Tracked-On: #2462
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
-- remove some unnecessary includes
-- fix a typo
-- remove unnecessary void before launch_vms
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Fix tsc_deadline issue by trapping TSC_DEADLINE msr write if VMX_TSC_OFFSET is not 0.
Because there is an assupmtion in the ACRN vART design that pTSC_Adjust and vTSC_Adjust are
both 0.
We can leave the TSC_DEADLINE write pass-through without correctness issue becuase there is
no offset between the pTSC and vTSC, and there is no write to vTSC or vTSC_Adjust write observed
in the RTOS so far.
This commit fix the potential correctness issue, but the RT performance will be badly affected
if vTSC or vTSC_Adjust was not zero, which we will address if such case happened.
Tracked-On: #3636
Signed-off-by: Yan, Like <like.yan@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
ACRN HV is designed/implemented with "invariant TSC" capability, which wasn't checked at boot time.
This commit adds the "invairant TSC" detection, ACRN fails to boot if there wasn't "invariant TSC" capability.
Tracked-On: #3636
Signed-off-by: Yan, Like <like.yan@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
We are trying to add both industry and sdc images to CL build. To
maintain the build interface unchanged (no change from CL side), we
extend the build command to generate the different target images.
To identity different images, we use rule:
$(HV_FILE).$(BOARD).$(FIRMWARE).$(SCENARIO)
as target image file name.
Tracked-On: #3593
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
ROOT_ENTRY_LOWER_CTP_MASK shall be (0xFFFFFFFFFFFFFUL << ROOT_ENTRY_LOWER_CTP_POS)
rather than (0xFFFFFFFFFFFFFUL).
Rationale:
CTP is bits 63:12 in a root entry according to Chapter 9.1 Root Entry in
VT-d spec.
Similarly, update ROOT_ENTRY_LOWER_PRESENT_MASK to keep the coding style
consistent.
CTX_ENTRY_UPPER_DID_MASK shall be (0xFFFFUL << CTX_ENTRY_UPPER_DID_POS)
rather than (0x3FUL << CTX_ENTRY_UPPER_DID_POS).
Rationale:
DID is bits 87:72 in a context entry according to Chapter 9.3 Context
Entry in VT-d spec. It takes 16 bits rather than 6 bits.
Tracked-On: #3626
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Now that ACPI is enabled for pre-launched VMs, we can remove all mptable code.
Tracked-On: #3601
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Statically define the per vm RSDP/XSDT/MADT ACPI template tables in vacpi.c,
RSDP/XSDT tables are copied to guest physical memory after checksum is
calculated. For MADT table, first fix up process id/lapic id in its lapic
subtable, then the MADT table's checksum is calculated before it is copies to
guest physical memory.
Add 8-bit checksum function in util.h
Tracked-On: #3601
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Move 8-bit sum code to a separate new function calculate_sum8() in
util.h and replace the old code with a call to calculate_sum8()
Minor code cleanup in found_rsdp() to make it more readable. Both break and
continue statements are used in a single for loop, changed to only use break
statement to make the logic simpler.
Fixed some coding style issues reported by checkpatch.pl for file
hypervisor/boot/acpi_base.c
Tracked-On: #3601
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Minor cosmetic fixes in acpi.h:
Move and group similar defines together
Rename RSDP_CHECKSUM_LENGTH to ACPI_RSDP_CHECKSUM_LENGTH
Add post fix 'U' to define as unsinged int and change code accordingly
Tracked-On: #3601
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
All tables and structs must be byte packed to match ACPI
specification, also use __packed in place of __attribute__((packed))
Tracked-On: #3601
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Currently ACPI related defines/structs are scattered across multiple C
source files, move them into acpi.h so that they can be shared and used by
vacpi code (to be added in subsequent commits).
Tracked-On: #3601
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Cacheline is flushed on EPT entry change, no need to invalidate cache globally
when VM created per VM.
Tracked-On: #3607
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Anthony Xu <anthony.xu@intel.com>
EPT tables are shared by MMU and IOMMU.
Some IOMMUs don't support page-walk coherency, the cpu cache of EPT entires
should be flushed to memory after modifications, so that the modifications
are visible to the IOMMUs.
This patch adds a new interface to flush the cache of modified EPT entires.
There are different implementations for EPT/PPT entries:
- For PPT, there is no need to flush the cpu cache after update.
- For EPT, need to call iommu_flush_cache to make the modifications visible
to IOMMUs.
Tracked-On: #3607
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Anthony Xu <anthony.xu@intel.com>
VT-d shares the EPT tables as the second level translation tables.
For the IOMMUs that don't support page-walk coherecy, cpu cache should
be flushed for the IOMMU EPT entries that are modified.
For the current implementation, EPT tables for translating from GPA to HPA
for EPT/IOMMU are not modified after VM is created, so cpu cache invlidation is
done once per VM before starting execution of VM.
However, this may be changed, runtime EPT modification is possible.
When cpu cache of EPT entries is invalidated when modification, there is no need
invalidate cpu cache globally per VM.
This patch exports iommu_flush_cache for EPT entry cache invlidation operations.
- IOMMUs share the same copy of EPT table, cpu cache should be flushed if any of
the IOMMU active doesn't support page-walk coherency.
- In the context of ACRN, GPA to HPA mapping relationship is not changed after
VM created, skip flushing iotlb to avoid potential performance penalty.
Tracked-On: #3607
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Anthony Xu <anthony.xu@intel.com>
-- move 'RFLAGS_AC' to cpu.h
-- move 'VMX_SUPPORT_UNRESTRICTED_GUEST' to msr.h
and rename it to 'MSR_IA32_MISC_UNRESTRICTED_GUEST'
-- move 'get_vcpu_mode' to vcpu.h
-- remove deadcode 'vmx_eoi_exit()'
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
move some data structures and APIs related host reset
from vm_reset.c to pm.c, these are not related with guest.
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
The vCOM2 of each VM is designed for VM communication, one VM could send
command or request to another VM through this channel. The feature will
be used for system S3/S5 implementation.
On Hybird scenario, vCOM2 of pre-launched VM will connect to vCOM2 of SOS_VM;
On Industry scenario, vCOM2 of post-launched RTVM will connect to vCOM2 of
SOS_VM.
Tracked-On: #3602
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
The settings of SOS VM COM1 which is used for console is board specific,
and this result in SOS VM COM2 which used for VM communication is also
board specific, so move the configure method from Kconfig to board configs
folder. The MACRO definition will be handled by acrn-config tool in future.
Tracked-On: #3602
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Set sos root device of apl-up2 to mmcblk0p3 and let UP2 uefi variant
and sbl variant share one config for now.
Tracked-On: #3214
Signed-off-by: Victor Sun <victor.sun@intel.com>
Now, we use native gdt saved in boot context for guest and assume
it could be put to same address of guest. But it may not be true
after the pre-launched VM is introduced. The gdt for guest could
be overwritten by guest images.
This patch make 32bit protect mode boot not use saved boot context.
Insteadly, we use predefined vcpu_regs value for protect guest to
initialize the guest bsp registers and copy pre-defined gdt table
to a safe place of guest memory to avoid gdt table overwritten by
guest images.
Tracked-On: #3532
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Currently, 'flags' is defined and set but never be used
in the flow of handling i/o request after then.
Tracked-On: #861
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Enable console vuart for the reset of VMs in industry scenario.
Tracked-On: #3370
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
In the definition of port i/o handler, struct acrn_vm * pointer
is redundant as input, as context of acrn_vm is aleady linked
in struct acrn_vcpu * by vcpu->vm, 'vm' is not required as input.
this patch removes argument '*vm' from 'io_read_fn_t' &
'io_write_fn_t', use '*vcpu' for them instead.
Tracked-On: #861
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Check whether the address area pointed by the guest
cr3 is valid or not before loading pdptrs. Inject #GP(0)
to guest if there are any invalid cases.
Tracked-On: #3572
Signed-off-by: Jie Deng <jie.deng@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
fix violations touched below:
1.Cast operation on a constant value
2.signed/unsigned implicity conversion
3.return value unused.
V1->V2:
1.bitmap api will return boolean type, not need to check "!= 0", deleted.
2.The behaves ~(uint32_t)X and (uint32_t)~X are not defined in ACRN hypervisor Coding Guidelines,
removed the change of it.
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
This patch moves vmx_rdmsr_pat/vmx_wrmsr_pat from vmcs.c to vmsr.c,
so that these two functions would become internal functions inside
vmsr.c.
This approach improves the modularity.
v1 -> v2:
* remove 'vmx_rdmsr_pat'
* rename 'vmx_wrmsr_pat' with 'write_pat_msr'
Tracked-On: #1842
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Hardcode "RELEASE=0" will cause the value of "CONFIG_RELEASE"
to be 'n' in kconfig.mk, it will be overwritten "CONFIG_RELEASE"
with Kconfig setting.
Tracked-On: #3565
Signed-off-by: Tianhua Sun <tianhuax.s.sun@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
When assgined a PCI PTDev to post-launched VM from SOS, using a pointer to point to
the real struct pci_vdev. When post-launched VM access its PTDev configure space in
SOS address space, using this real struct pci_vdev.
Tracked-On: #3475
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Add a field (vdev_ops) in struct acrn_vm_pci_dev_config to configure a PCI CFG
operation for an emulated PCI device. Use pci_pt_dev_ops for PCI_DEV_TYPE_PTDEV
by default if there's no such configure.
Tracked-On: #3475
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add emulated PCI device configure for SOS to prepare for add support for customizing
special pci operations for each emulated PCI device.
Tracked-On: #3475
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
now the dependency is like this in Makefile:
acrn.bin << xxxx.a << xxxx.obj
if excute 'make' in hypervsior fold for the first time,
it can generate acrn.bin, if excute 'make' for second
time, it can not do the final link because there are
the same timestamp for acrn.bin and xxxx.a generated by
previous build, add PHONY to fix this issue.
Tracked-On: #3542
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
String buffer temp_str is defined with size TEMP_STR_SIZE(60U) but accessed with MAX_STR_SIZE(256U). Better to limit the access bound to TEMP_STR_SIZE to prevent potential issue.
Tracked-On: #3549
Signed-off-by: Yifan Luo <luoyifan@cmss.chinamobile.com>
Create an iommu domain for all guest in vpci_init no matter if there's a PTDev
in it.
Tracked-On: #3475
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Reviewed-by: Dongsheng Zhang <dongsheng.x.zhang@intel.com>
Now almost the vPCI device information could be obtain from PCI device configure
in VM configure. init_vdevs could make things more easier.
And rename init_vdevs to vpci_init_vdevs, init_vdev to vpci_init_vdevs to avoid
MISRA-C violations.
Tracked-On: #3475
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Reviewed-by: Dongsheng Zhang <dongsheng.x.zhang@intel.com>
Align SOS pci device configure with pre-launched VM and filter pre-launched VM's
PCI PT device from SOS pci device configure.
Tracked-On: #3475
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
pci_dev_config in VM configure stores all the PCI devices for a VM. Besides PT
devices, there're other type devices, like virtual host bridge. So rename ptdev
to pci_dev for these configure.
Tracked-On: #3475
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
For non-trusty hypercalls, HV should inject #GP(0) to vCPU if they are
from non-ring0 or inject #UD if they are from ring0 of non-SOS. Also
we should not modify RAX of vCPU for these invalid vmcalls.
Tracked-On: #3497
Signed-off-by: Victor Sun <victor.sun@intel.com>
In current code, the timer_list for per cpu can be accessed both in
vmexit and softirq handler. There is a case that, the timer_list is
modifying in vmexit, but an interrupt occur, the timer_list is also
modified in softirq handler. So the time_list may in unpredictable
state. In some platforms, the hv console may hang as its timer handler
is not invoked because of the corruption for timer_list.
So, to fix the issue, disable the interrupt before modifying the
timer_list.
Tracked-On: #3512
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Reviewed-by: Li, Fei1 <fei1.li@intel.com>
In hybrid mode, pre-launched VM should have the highest severity to
handle platform reset, the flag should not be set in SOS VM;
Tracked-On: #3505
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
In some case, guest need to get more information under virtual environment,
like guest capabilities. Basically this could be done by hypercalls, but
hypercalls are designed for trusted VM/SOS VM, We need a machenism to report
these information for normal VMs. In this patch, vCPUID leaf 0x40000001 will
be used to satisfy this needs that report some extended information for guest
by CPUID.
Tracked-On: #3498
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The policy of vART is that software in native can run in
VM too. And in native side, the relationship between the
ART hardware and TSC is:
pTSC = (pART * M) / N + pAdjust
The vART solution is:
- Present the ART capability to guest through CPUID leaf
15H for M/N which identical to the physical values.
- PT devices see the pART (vART = pART).
- Guest expect: vTSC = vART * M / N + vAdjust.
- VMCS.OFFSET = vTSC - pTSC = vAdjust - pAdjust.
So to support vART, we should do the following:
1. if vAdjust and vTSC are changed by guest, we should change
VMCS.OFFSET accordingly.
2. Make the assumption that the pAjust is never touched by ACRN.
For #1, commit "a958fea hv: emulate IA32_TSC_ADJUST MSR" has implementation
it. And for #2, acrn never touch pAdjust.
--
v2 -> v3:
- Add comment when handle guest TSC_ADJUST and TSC accessing.
- Initialize the VMCS.OFFSET = vAdjust - pAdjust.
v1 -> v2
Refine commit message to describe the whole vART solution.
Tracked-On: #3501
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add to include acrn.32.out during cl rpm
generation as acrn.(board).32.out
This is required for Hybrid mode bringup in multios
Tracked-On:#3487
Signed-off-by: Nikhil Rane <nikhil.rane@intel.com>
To fix below err format:
"%s" is used to output 'secondary_bus' with type of 'uint8_t'
Tracked-On: #861
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
In lib/string.c, strncmp doesn't consider condition "n_arg=0",
just add a process to "n_arg=0".
Tracked-On: projectacrn/acrn-hypervisor#3466
Signed-off-by: YanX Fu <yanx.fu@intel.com>
Reviewed-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The CONFIG_BOARD value in defconfig should match with Makefile, otherwise
the build might be failed in some condition.
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
This patch is to clean-up acrn-hypervisor root directory, targt only 5 folders under acrn-hypervisor:1.hypervisor,2.devicemodel,3.misc,4.doc,5.build
Tracked-On: #3482
Signed-off-by: Terry Zou <terry.zou@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Currently the Px Cx supported SoCs which listed in cpu_state_tbl.c is limited,
and it is not a wise option to build a huge state table data base to support
Px/Cx for other SoCs. This patch give a alternative solution that build a board
specific cpu state table in board.c which could be auto-generated by offline
tool, then the CPU Px/Cx of customer board could be enabled;
Hypervisor will search the cpu state table in cpu_state_tbl[] first, if not
found then go check board_cpu_state_tbl. If no matched cpu state table is found
then Px/Cx will not be supported;
Tracked-On: #3477
Signed-off-by: Victor Sun <victor.sun@intel.com>
The functions always return 0 so it makes sense to make them void functions
Tracked-On: #3475
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The caller function has already done the checking to make sure the req is targeted
for the called functions, so there is no need to do the same checking in called
functions.
Remove calling of is_bar_offset() in vdev_pt_read_cfg/vdev_pt_write_cfg:
In vpci.c's vpci_read_pt_dev_cfg and vpci_write_dev_cfg, vbar_access is called
first to make sure the req is targed for vdev pt (vbar emulation) before
dispatching the request to vdev_pt_read_cfg/vdev_pt_write_cfg, so there is no
need to call is_bar_offset() again to do the same checking in vdev_pt_read_cfg/vdev_pt_write_cfg.
The same goes for msicap_access/msixcap_access
vbar_access should only check if the req is for bar access, it should not care
about whether the bar access is 4 bytes or 4 bytes aligned. The called function
vdev_pt_write_vbar will check and ignore the write access if it is not 4 bytes or 4 bytes
aligned, although this is counted as a bar access.
vdev_pt_read_vbar will check if the read access is 4 bytes or 4 bytes
aligned, although this is counted as a bar access, set read value (*val) to
-1 if the access is not 4 bytes (or aligned).
Tracked-On: #3475
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
After "commit f0e1c5e init vcpu host stack when reset vcpu", SOS resume form S3
wants to schedule to vcpu_thread not the point where SOS enter S3. So we should
schedule to idel first then reschedule to execute vcpu_thread.
Tracked-On: #3387
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
When monitor/mwait is not supported, it still uses the inline assembly in
wait_sync_change. As it is not allowed based on MISRA-C, the asm wrapper
is used for pause scenario in wait_sync_change.
Tracked-On: #3442
Suggested-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Based on SDM Vol2 the monitor uses the RAX register to setup the address
monitored by HW. The mwait uses the rax/rcx as the hints that the process
will enter. It is incorrect that the same value is used for monitor/mwait.
The ecx in mwait specifies the optional externsions.
At the same time it needs to check whether the the value of monitored addr
is already expected before entering mwait. Otherwise it will have possible
lockup.
V1->V2: Add the asm wrappper of monitor/mwait to avoid the mixed usage of
inline assembly in wait_sync_change
v2-v3: Remove the unnecessary line break in asm_monitor/asm_mwait.
Follow Fei's comment to remove the mwait ecx hint setting that
treats the interrupt as break event. It only needs to check whether the
value of psync_change is already expected.
Tracked-On: #3442
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
When need hpa and hva translation before init_paging, we need hpa2hva_early and
hva2hpa_early since init_paging may modify hva2hpa to not be identical mapping.
Tracked-On: #2987
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
1) Using printf to warn if platform ram size configuration is wrong.
2) Using printf to warn if the platform is not supported by ACRN hypervisor.
Tracked-On: #2987
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Enable uart as early as possible to make things easier for debugging.
After this we could use printf to output information to the uart. As for
pr_xxx APIs, they start to work when init_logmsg is called.
Tracked-On: #2987
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Now if the uart is mapped to a PIO address space, the uart base address is a physical
PIO address; if it's mapped to a MMIO address space, the uart base address is a
virtual MMIO address. Add union uart_addr structure to imply this.
And define a console_uart structure to add all uart related fields into this structure.
Tracked-On: #2987
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
PMC is hidden from guest and hypervisor should
inject UD to guest when 'rdpmc' vmexit.
Tracked-On: #3453
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Per SDM, writing 0 to MSR_IA32_MCG_STATUS is allowed, HV should not
return -EACCES on this case;
Tracked-On: #3454
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The vbar info which hard-coded in scenarios/logical_partition/pt_dev.c
is board specific actually, so move these information to
arch/x86/configs/$(CONFIG_BOARD)/pci_devices.h.
Please be aware that the memory range of vBAR should exactly match with
the e820 layout of VM.
Tracked-On: #3214
Signed-off-by: Victor Sun <victor.sun@intel.com>
This is a followup patch to fix the coding style issue introduced
in by commit "c2d25aafb889ade954af8795df2405a94024d860":
The unmodified pointer should be defined as const
Also addressed one comments from Fei to use reversed function call
in vpci_init_pt_dev and vpci_deinit_pt_dev.
Tracked-On: #3241
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
NUC7i7BNH is not a board name but a product name of KBL NUC, and it is
outdated to support LOGICAL_PARTITION scenario and HYBRID scenario.
NUC7i7DNH is the product name of KBL NUC that ACRN currently supported,
but its official board name is NUC7i7DNB, so change the folder name from
"nuc7i7bnh" to "nuc7i7dnb" under arch/x86/configs/.
Please refer more details on below documentation:
Intel® NUC Board/Kit NUC7i7DN Technical Product Specification
Tracked-On: #3446
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Xiangyang Wu <xiangyang.wu@linux.intel.com>
'invept' is not expected in guest and hypervisor should
inject UD when 'invept' VM exit happens.
Tracked-On: #3444
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
To avoid acrn_handle_pending_request called twice within one vmexit,
we remove the error-prone "continue" in vcpu_thread.
And make vcpu shecheduled out if fatal error happens with vcpu.
Tracked-On: #3387
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Otherwise, the previous local variables in host stack is not reset.
Tracked-On: #3387
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
softirq shouldn't be bounded to vcpu thread. One issue for this
is shell (based on timer) can't work if we don't start any guest.
This change also is trying best to make softirq handler running
with irq enabled.
Also update the irq disable/enabel in vmexit handler to align
with the usage in vcpu_thread.
Tracked-On: #3387
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Now, we are trying to move softirq from vcpu thread context to
real softirq context (it was not real softirq context even it has
softirq name), we need to make sure all the spinlock could be
access from softirq handler to use spinlock_irqsave_obtain and
spinlock_irqrestore_release.
Tracked-On: #3387
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Because we depend on guest OS to switch x2apic mode to enable lapic pass-thru, vlapic is working at the early stage of booting, eg: in virtual boot loader.
After lapic pass-thru enabled, no interrupt should be injected via vlapic any more.
This commit resets the vlapic to clear the pending status and adds ptapic_ops to enforce that no more interrupt accepted/injected via vlapic.
Tracked-On: #3227
Signed-off-by: Yan, Like <like.yan@intel.com>
This commit adds ops to vlapic structure, and add an *ops parameter to vlapic_reset().
At vlapic reset, the ops is set to the global apicv_ops, and may be assigned
to other ops later.
Tracked-On: #3227
Signed-off-by: Yan, Like <like.yan@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Per community requirement;up to three post-launched VM might be
needed for some automotive SDC system, so add SDC2 scenario to
satisfy this requirement.
Tracked-On: #3429
Signed-off-by: fuzhongl <fuzhong.liu@intel.com>
Reviewed-by: Victor Sun <victor.sun@intel.com>
In release environment, binary files must be stripped in
order to remove debugging code sections and symbol information
that aid attackers in the process of disassembly and reverse
engineering.
Use '-s' linking option to remove symbol table and relocation
information from release binaries.
Tracked-On: #3427
Signed-off-by: Tianhua Sun <tianhuax.s.sun@intel.com>
Reviewed-by: Yonghua Huang <yonghua.huang@intel.com>
When a VM send data to its communication vuart, the vuart driver should
inject a DR interrupt to target VM and also inject a THRE interrupt to
self VM. But the original code inject the THRE interrupt to target VM,
correct it in this patch.
Tracked-On: #3423
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
When initialize secondary pcpu, pass INVALID_CPU_ID as param of init_pcpu_pre()
looks weird, so change the param type to bool to represent whether the pcpu is
a BSP or AP.
Tracked-On: #3420
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
In x86 architecture, word/doubleword/quadword aligned read/write on its boundary
is atomic, so we may remove atomic load/store.
As for atomic set/clear, use bitmap_set/claer seems more reasonable. After replace
them all, we could remove them too.
Tracked-On: #1842
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
vCPU schedule state change is under schedule lock protection. So there's no need
to be atomic.
Tracked-On: #1842
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
For pre-launched VMs and SOS, vCPUs are created on BSP one by one; For post-launched VMs,
vCPUs are created under vmm_hypercall_lock protection. So vcpu_create is called sequentially.
Operation in vcpu_create don't need to be atomic.
Tracked-On: #1842
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
For per-vCPU, EOI exit bitmap is a global parameter which should set or clear
atomically since there's no lock to protect this critical variable.
Tracked-On: #1842
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
ACRN Coding guidelines requires type conversion shall be explicity. However,
there's no need for this case since we could return bool directly.
Tracked-On: #1842
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Now sched_object and sched_context are protected by scheduler_lock. There's no
chance to use runqueue_lock to protect schedule runqueue if we have no plan to
support schedule migration.
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
It's a global parameter and could be set concurrently. So it should be set atomically.
Tracked-On: #1842
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Reviewed-by: Yin Fenwgei <fengwei.yin@intel.com>
Schedule context flag may set out of schedule lock protection, like NEED_OFFLINE
or NEED_SHUTDOWN_VM. So NEED_RESCHEDULE flag should be set atomically too.
Tracked-On: #1842
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
In grub 2.02, the flag of MULTIBOOT_INFO_HAS_CMDLINE is set even there is
no cmdline was configured. So we need to validate the content of cmdline
in multiboot info. If there is no cmdline exist, we should not do merge
cmdline for SOS VM.
Tracked-On: #3214
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
And use vhostbridge for both SOS and pre-launched VM.
Tracked-On: #3241
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
And use the ops based operations instead of direct access vdev
specific API.
Tracked-On: #3241
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
It will be used to define pci vdev own ops. And high level API
will call this ops intead of invoking device specific functions
directly.
Tracked-On: #3241
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
In current design, devicemodel passes VM UUID to create VMs and hypervisor
would check the UUID whether it is matched with the one in VM configurations.
Kata container would maintain few UUIDs to let ACRN launch the VM, so
hypervisor need to add these UUIDs in VM configurations for Kata running.
In the hypercall of hcall_get_platform_info(), hypervisor will report the
maximum Kata container number it will support. The patch will add a Kconfig
to indicate the maximum Kata container number that SOS could support.
In current stage, only one Kata container is supported by SOS on SDC scenario
so add one UUID for Kata container in SDC VM configuration. If we want to
support Kata on other scenarios in the future, we could follow the example
of this patch;
Tracked-On: #3402
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
'pcpu_id' should be less than CONFIG_MAX_PCPU_NUM,
else 'per_cpu_data' will overflow. This commit fixes
this potential overflow issue.
Tracked-On: #3397
Signed-off-by: Tianhua Sun <tianhuax.s.sun@intel.com>
Reviewed-by: Yonghua Huang <yonghua.huang@intel.com>
- To support grub multiboot for nuc6cayh, we should put hv ram start
at a suitable address;
- Enable HSUART controller at PCI 0:18.0 as HV serail port;
Tracked-On: #3214
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add ve820 table for apl nuc board to enable prelaunched VM on it;
Tracked-On: #3214
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
ACRN Coding guidelines requires two different types pointer can't
convert to each other, except void *.
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
ACRN Coding guidelines requires two different types pointer can't
convert to each other, except void *.
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
ACRN Coding guidelines requires two different types pointer can't
convert to each other, except void *.
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
ACRN Coding guidelines requires type conversion shall be explicity.
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
In almost case, vLAPIC will only be accessed by the related vCPU. There's no
synchronization issue in this case. However, other vCPUs could deliver interrupts
to the current vCPU, in this case, the IRR (for APICv base situation) or PIR
(for APICv advanced situation) and TMR for both cases could be accessed by more
than one vCPUS simultaneously. So operations on IRR or PIR should be atomical
and visible to other vCPUs immediately. In another case, vLAPIC could be accessed
by another vCPU when create vCPU or reset vCPU which could be supposed to be
consequently.
Tracked-On: #1842
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
1) add a write memory barrier after setting pcpu_sync to one to let this change
visible to AP immediately.
2) there's only BSP will set pcpu_sync, so there's no memory order issue between CPUs.
Tracked-On: #1842
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
In spite of vhm_req status could be updated in HV and DM on different CPUs, they
only change vhm_req status when they detect vhm_req status has been updated by
each other. So vhm_req status will not been misconfigured. However, before HV
sets vhm_req status to REQ_STATE_PENDING, vhm_req buffer filling should be visible
to DM. Add a write memory barrier to guarantee this.
Tracked-On: #1842
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Hypervisor exposes mitigation technique for Speculative
Store Bypass(SSB) to guests and allows a guest to determine
whether to enable SSBD mitigation by providing direct guest
access to IA32_SPEC_CTRL.
Before that, hypervisor should check the SSB mitigation support
on underlying processor, this patch is to add this capability check.
Tracked-On: #3385
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Fix the violations list below:
1.Function should have one return entry.
2.Do not use -- or ++ operation.
3.For loop should be simple, shall not use comma operations.
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
ACRN Coding guidelines requires parameters need to add const prefix when the
parameter is not modified in its function or recursion function call.
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
cancel_event_injection is not need any more if we do 'scheudle' prior to
acrn_handle_pending_request. Commit "921288a6672: hv: fix interrupt
lost when do acrn_handle_pending_request twice" bring 'schedule'
forward, so remove cancel_event_injection related stuff.
Tracked-On: #3374
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
One cycle of vmexit/vmentry might lost interrupts.
This is the scenario,
1) vmexit, vmexit_handlers
2) softirq & disable interrupt
3) acrn_handle_pending_request
4) schedule if needed, then back to 1) and loop again.
5) vmentry
The step 3) might be executed twice. The problem is at the second
execution of acrn_handle_pending_request, we might overwrite
VMX_ENTRY_INT_INFO_FIELD of current vmcs, which cause guest lost
interrupts.
The fix is moving 4) prior to 3), then we will handle the pending
requests and vmentry directly.
Tracked-On: #3374
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
ACRN Coding guidelines requires no dead code.
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Reviewed-by: Li, Fei1 <fei1.li@intel.com>
Since 9c81f4c32c ("hv:build library to lib_mod.a"), the parallel build
system was broken. You cannot use "make -j #" to build ACRN.
To fix this we need to declare explicit rules for the files to be built.
Also remove "$(LIB_FLAGS): lib " and " MOD_DEPS " since they are
redundancy after this change.
This closes#3351
Tracked-On: projectacrn#3351
Signed-off-by: Miguel Bernal Marin <miguel.bernal.marin@linux.intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Microarchitectural Data Sampling (MDS) is a hardware vulnerability
which allows unprivileged speculative access to data which is available
in various CPU internal buffers.
1. Mitigation on ACRN:
1) Microcode update is required.
2) Clear CPU internal buffers (store buffer, load buffer and
load port) if current CPU is affected by MDS, when VM entry
to avoid any information leakage to guest thru above buffers.
3) Mitigation is not needed if ARCH_CAP_MDS_NO bit (bit5)
is set in IA32_ARCH_CAPABILITIES MSR (10AH), in this case,
current processor is no affected by MDS vulnerability, in other
cases mitigation for MDS is required.
2. Methods to clear CPU buffers (microcode update is required):
1) L1D cache flush
2) VERW instruction
Either of above operations will trigger clearing all
CPU internal buffers if this CPU is affected by MDS.
Above mechnism is enumerated by:
CPUID.(EAX=7H, ECX=0):EDX[MD_CLEAR=10].
3. Mitigation details on ACRN:
if (processor is affected by MDS)
if (processor is not affected by L1TF OR
L1D flush is not launched on VM Entry)
execute VERW instruction when VM entry.
endif
endif
4. Referrence:
Deep Dive: Intel Analysis of Microarchitectural Data Sampling
https://software.intel.com/security-software-guidance/insights/
deep-dive-intel-analysis-microarchitectural-data-sampling
Deep Dive: CPUID Enumeration and Architectural MSRs
https://software.intel.com/security-software-guidance/insights/
deep-dive-cpuid-enumeration-and-architectural-msrs
Tracked-On: #3317
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Anthony Xu <anthony.xu@intel.com>
Reviewed-by: Jason CJ Chen <jason.cj.chen@intel.com>
ACRN hypervisor always print CPU microcode update
warning message on KBL NUC platform, even after
BIOS was updated to the latest.
'check_cpu_security_cap()' returns false if
no ARCH_CAPABILITIES MSR support on current platform,
but this MSR may not be available on some platforms.
This patch is to remove this pre-condition.
Tracked-On: #3317
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Jason CJ Chen <jason.cj.chen@intel.com>
1. reset polarity of ptirq_remapping_info to zero.
this help to set correct initial pin state, and fix the interrupt lost issue
when assign a ptirq to uos.
2. since vioapic_generate_intr relys on rte, we should build rte before
generating an interrput, this fix the redundant interrupt.
Tracked-On: #3362
Signed-off-by: Cai Yulong <yulongc@hwtc.com.cn>
According to SDM, xsetbv writes the contents of registers EDX:EAX into the 64-bit
extended control register (XCR) specified in the ECX register. (On processors
that support the Intel 64 architecture, the high-order 32 bits of RCX are ignored.)
In current code, RCX is checked, should ingore the high-order 32bits.
Tracked-On: #3360
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Yonghua Huang <yonghua.huang@intel.com>
Rename vbdf to bdf for the following reasons:
Use the same coding style as struct pci_pdev, as pci_pdev uses bdf instead of pbdf
pci_vdev implies the its bdf is virtual, no need to prefix bdf with the v
prefix (redundant)
Tracked-On: #3241
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
For PIO bar emulation, initially or when guest reprograms the PIO bar, allow guest
access for the specified bar base address (pio port) and sized by calling vev_pt_allow_io_vbar
For PIO bar emulation, just set the initial vbar base address equal to pbar
base address. For example, if the pbar base address is 0x2000, then set the
initial vbar base address also to 0x2000
Tracked-On: #3241
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
For sos, its vbar base address is set to pbar base address (vbar gpa = pbar
hpa)
For pre-launched VMs, vbar base address is pre-assigned in vm_config
Rename vdev_pt_remap_msix_table_bar to vdev_pt_remap_msix_table_vbar and make it
a static function
Remove unused function prototye vdev_pt_remap_msix_table_bar() in vpci_priv.h
Tracked-On: #3241
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Enable 64-bit bar emulation, if pbar is of type PCIBAR_MEM64, vbar will also be
of type PCIBAR_MEM64 instead of PCIBAR_MEM32
With 64-bit bar emulation code in place, we can remove enum pci_bar_type type
from struct pci_bar as bar type can be derived from struct pci_bar's reg member
by using the pci_get_bar_type function
Rename functions:
pci_base_from_size_mask --> git_size_masked_bar_base
Remove unused functions
Tracked-On: #3241
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
The current implement will trigger shutdown vm request on the BSP VCPU on the VM,
not the VCPU will trap out because triple fault. However, if the BSP VCPU on the VM
is handling another IO emulation, it may overwrite the triple fault IO request on
the vhm_request_buffer in function acrn_insert_request. The atomic operation of
get_vhm_req_state can't guarantee the vhm_request_buffer will not access by another
IO request if it is not running on the corresponding VCPU. So it should trigger
triple fault shutdown VM IO request on the VCPU which trap out because of triple
fault exception.
Besides, rt_vm_pm1a_io_write will do the right thing which we shouldn't do it in
triple_fault_shutdown_vm.
Tracked-On: #1842
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Since spinlock ptdev_lock is used to protect ptdev entry, there's no need to
use atomic operation to protect ptdev active flag in split of it's wrong used
to protect ptdev entry. And refine active flag data type to bool.
Tracked-On: #1842
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
According to SDM, bit N (physical address width) to bit 63 should be masked when calculate
host page frame number.
Currently, hypervisor doesn't set any of these bits, so gpa2hpa can work as expectd.
However, any of these bit set, gpa2hpa return wrong value.
Hypervisor never sets bit N to bit 51 (reserved bits), for simplicity, just mask bit 52 to bit 63.
Tracked-On: #3352
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Create 2 functions from code:
pci_base_from_size_mask
vdev_pt_remap_mem_vbar
Use vbar in place of vdev->bar[idx] by setting vbar to &vdev->bar[idx]
Change base to uint64_t to accommodate 64-bit MMIO bar size masking in
subsequent commits
Tracked-On: #3241
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
At this point, uint64_t base in struct pci_bar is not used by any code, so we
can remove it.
Tracked-On: #3241
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Only do the EPT mapping if vbar base (gpa) is not mapped to the same pbar (hpa) before.
Need to unmap the existing mapping for a vbar base (gpa), otherwise, hv will
throw an error.
Tracked-On: #3241
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Define/Use variable in place of code to improve readability:
Define new local variable struct pci_bar *vbar, and use vbar-> in place of vdev->bar[idx].
Define new local variable uint64_t vbar_base in init_vdev_pt
Rename uint64_t vbar[PCI_BAR_COUNT] of struct acrn_vm_pci_ptdev_config to uint64_t vbar_base[PCI_BAR_COUNT]
Tracked-On: #3241
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Replace new_base with vbar_base in vdev_pt_remap_generic_mem_vbar().
We will call vdev_pt_remap_generic_mem_vbar() after a new vbar base
is set, no need to pass new_base to vdev_pt_remap_generic_mem_vbar(),
as this new vbar base (vbar_base) can be obtained by calling get_vbar_base().
The reason we call vdev_pt_remap_generic_mem_vbar() after a new vbar base
is set is for 64-bit mmio handling: when the lower 32-bit of 64-bit mmio vbar is
set, we will defer calling vdev_pt_remap_generic_mem_vbar until its upper 32-bit
vbar base is set.
Tracked-On: #3241
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
To remember the previously mapped/registered vbar base
For the following reasons:
register_mmio_emulation_handler() will throw an error if the the same addr_lo is
alreayd registered before
We are going to remove the base member from struct pci_bar, so we cannot use vdev->bar[idx].base
in the code any more
In subsequent commits, we will assume vdev_pt_remap_generic_mem_vbar() is called after a new
vbar base is set, mainly because of 64-bit mmio bar handling, so we need a
separate bar_base_mapped[] array to track the previously mapped vbar bases.
Tracked-On: #3241
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
vbar base can be built by using the base address fields stored in
struct pci_bar's reg member.
get_vbar_base: return vbar's base address in 64-bit. For 64-bit MMIO bar, its lower 32-bits
base address and upper 32-bits base are combined into one 64-bit base address
And changed related code to use get_vbar_base to get vbar base address in
64-bit.
Tracked-On: #3241
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
We added "union pci_bar_reg reg" to struct pci_bar in previous commit,
but only pci_pdev uses it and pci_vdev does not use it. Starting from
this commit, pci_vdev will use it:
In init_vdev_pt(), copy pbar's reg's flags portion to corresponding vbar's
reg.
When guest updates the vbar base address, the corresponding vbar reg's base
address will also be updated, so that in subsequent commits, we can eventually
remove the base member in struct pci_bar.
Rename local variable new_bar to base in vdev_pt_write_vbar
Tracked-On: #3241
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
pbar base can be built by using the base address fields stored in
struct pci_bar's reg member.
get_pbar_base: return pbar's base address in 64-bit. For 64-bit MMIO bar, its lower 32-bits
base address and upper 32-bits base are combined into one 64-bit base address
pci_bar_2_bar_base: helper function that is called by get_pbar_base
And changed related code to use get_pbar_base to get pbar base address in 64-bit
Tracked-On: #3241
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
There is no need to call get_bar_base(), as new_bar is set to val & mask,
where mask is the bar size mask, so new_base has already been set to be the
bar base address before get_bar_base() is called on it.
Tracked-On: #3241
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
ACRN coding guideline requires function shall have only one return entry.
Fix it.
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
vcpu is never scan because of scan tool will be crashed!
After modulization, the vcpu can be scaned by the scan tool.
Clean up the violations in vcpu.c.
Fix the violations:
1.No brackets to then/else.
2.Function return value not checked.
3.Signed/unsigned coversion without cast.
V1->V2:
change the type of "vcpu->arch.irq_window_enabled" to bool.
V2->V3:
add "void *" prefix on the 1st parameter of memset.
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The sbuf is allocated for each pcpu by hypercall from SOS. Before launch
Guest OS, the script will offline cpus, which will trigger vcpu reset and
then reset sbuf pointer. But sbuf only initiate once by SOS, so these
cpus for Guest OS has no sbuf to use. Thus, when run 'acrntrace' on SOS,
there is no trace data for Guest OS.
To fix the issue, only reset the sbuf for SOS.
Tracked-On: #3335
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Reviewed-by: Yan, Like <like.yan@intel.com>
Use nr_bars instead of PCI_BAR_COUNT to check bar access offset.
As while normal pci device has max 6 bars, pci bridge only has 2 bars,
so for pci normal pci device, pci cfg offsets 0x10-0x24 are for bar access,
but for pci bridge, only 0x10-0x14 are for bar access (0x18-0x24 are
for other accesses).
Rename function:
pci_bar_access --> is_bar_offset
Tracked-On: #3241
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
And put the checking in vdev_pt_write_cfg instead to have less nesting in
vdev_pt_write_vbar to improve code readability.
Rename function:
vdev_pt_remap_generic_bar --> vdev_pt_remap_generic_mem_vbar
vdev_pt_read_cfg's function declaration is merged into one line instead of 2
lines
Tracked-On: #3241
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
nr_bars in struct pci_pdev is used to store the actual # of bars (
6 for normal pci device and 2 for pci bridge), nr_bars will be used in subsequent
patches
Use uint32_t for bar related variables (bar index, etc) to unify the bar
related code (no casting between uint32_t and uint8_t)
Tracked-On: #3241
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
union pci_bar uses bit fields and follows the PCI bar spec definition to define the
bar flags portion and base address, this is to keep the same hardware format for vbar
register. The base/type of union pci_bar are still kept to minimize code changes
in one patch, they will be removed in subsequent patches.
define pci_pdev_get_bar_base() function to extract bar base address given a 32-bit raw
bar value
define a utility function pci_get_bar_type() to extract bar types
from raw bar value to simply code, as this function will be used in multiple
places later on: this function can be called on reg->value stored in struct
pci_bar to derive bar type.
Tracked-On: #3241
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Add get_offset_of_caplist() function to return capability offset based on header type:
For normal pci device and bridge, its capability offset is at offset 0x34
For cardbus, its capability offset is at offset 0x14
Tracked-On: #3241
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
find_pci_pdev is not used any more, remove it.
Tracked-On: #3241
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The current implement will cache each ISR vector in ISR vector stack and do
ISR vector stack check when updating PPR. However, there is no need to do this
because:
1) We will not touch vlapic->isrvec_stk[0] except doing vlapic_reset:
So we don't need to do vlapic->isrvec_stk[0] check.
2) We only deliver higher priority interrupt from IRR to ISR:
So we don't need to check whether vlapic->isrvec_stk interrupts is always increasing.
3) There're only 15 different priority interrupt, It will not happened that more that
15 interrupts could been delivered to ISR:
So we don't need to check whether vlapic->isrvec_stk_top will larger than
ISRVEC_STK_SIZE which is 16.
This patch try to remove ISR vector stack and use isrv to cache the vector number for
the highest priority bit that is set in the ISR.
Tracked-On: #1842
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
there is a build error if we only build debug/release library
because missing the build/modules folder
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
modified: Makefile
modified: debug/Makefile
modified: release/Makefile
Fix the violations not touched the logical.
1.Function return value not checked.
2.Logical conjuctions need brackets.
3.No brackets to then/else.
4.Type conversion without cast.
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
When debugging the HV, we may want to check the HV version information
frequently. In current HV shell command, there is no such kind of command
to check this information. We can only scroll up the HV console log to
get the information. If there are very huge amount of lines of log, it
will be very time-wasting to get the HV version information.
So, this patch adds 'version' command to get the HV version information
conveniently.
Tracked-On: #3310
Acked-by: Anthony Xu <anthony.xu@intel.com>
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Remove couple of run-time ASSERTs in ioapic module by checking for the
number of interrupt pins per IO-APICs against the configured MAX_IOAPIC_LINES
in the initialization flow.
Also remove the need for two MACROs specifying the max. number of
interrupt lines per IO-APIC and add a config item MAX_IOAPIC_LINES for the
same.
Tracked-On: #3299
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
MISRA-C requires inline functions should be declared static,
these APIs are external interfaces,remove inline
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
modified: arch/x86/guest/vcpu.c
MISRA-C standard requires the type of result of expression in if/while pattern shall be boolean.
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
There are a lot of works to do between create_vm (HV will mark vm's state
as VM_CREATED at this stage) and vm_run (HV will mark vm's state as VM_STARTED),
like building mptable/acpi table, initializing mevent and vdevs. If there is
something goes wrong between create_vm and vm_run, the devicemodel will jumps
to the deinit process and will try to destroy the vm. For example, if the
vm_init_vdevs failed, the devicemodel will jumps to dev_fail and then destroy
the vm.
For normal vm in above situation, it is fine to destroy vm. And we can create and
start it next time. But for RTVM, we can't destroy the vm as the vm's state is
VM_CREATED. And we can only destroy vm when its state is VM_POWERING_OFF. So, the
vm will stay at VM_CREATED state and we will never have chance to destroy it.
Consequently, we can't create and start the vm next time.
This patch fixes it by allowing to pause and then destroy RTVM when its state is VM_CREATED.
Tracked-On: #3069
Acked-by: Eddie Dong <eddie.dong@intel.com>
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
wbinvd is used to write back all modified cache lines in the processor's
internal cache to main memory and invalidates(flushes) the internal caches.
Using clflushopt instructions to emulate wbinvd to flush each
guest vm memory, if CLFLUSHOPT is not supported, boot will fail.
Signed-off-by: Jack Ren <jack.ren@intel.com>
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Reviewed-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The has_rt_vm walk through all VMs to check RT VM flag and if
there is no any RT VM, then return false otherwise return true.
Signed-off-by: Jack Ren <jack.ren@intel.com>
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Reviewed-by: Li, Fei1 <fei1.li@intel.com>
The ept_flush_leaf_page API is used to flush address space
from a ept page entry, user can use it to match walk_ept_mr to
flush VM address space.
Signed-off-by: Jack Ren <jack.ren@intel.com>
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Reviewed-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The walk_ept_table API is used to walk through EPT table for getting
all of present pages, user can get each page entry and its size
from the walk_ept_table callback.
The get_ept_entry is used to getting EPT pointer of the vm, if current
context of mv is secure world, return secure world EPT pointer, otherwise
return normal world EPT pointer.
Signed-off-by: Jack Ren <jack.ren@intel.com>
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Reviewed-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
flush_address_space is used to flush address space by clflushopt instruction.
Signed-off-by: Jack Ren <jack.ren@intel.com>
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Reviewed-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
CLFLUSHOPT is used to invalidate from every level of the cache hierarchy
in the cache coherence domain the cache line that contains the linear
address specified with memory operand. If that cache line contains
modified date at any level of the cache hierarchy, that data is written
back to memory.
If the platform does not support CLFLUSHOPT instruction, boot will fail.
Signed-off-by: Jack Ren <jack.ren@intel.com>
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Reviewed-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The current implement doesn't clear which access type we support for
APIC-Access VM Exit:
1) linear access for an instruction fetch
-- APIC-access page is mapped as UC which doesn't support fetch
2) linear access (read or write) during event delivery
-- Which is not happened in normal case except the guest went wrong, such as,
set the IDT table in APIC-access page. In this case, we don't need to support.
3) guest-physical access during event delivery;
guest-physical access for an instruction fetch or during instruction execution
-- Do we plan to support enable APIC in real mode ? I don't think so.
Tracked-On: #1842
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
In hcall_inject_msi, we check vlapic state of SOS by mistake.
If the SOS's vlapic state doesn't equal to target_vm's, the OVMF will
hang when boot up. Instead, we should check the target_vm's
vlapic state.
Tracked-On: #3069
Acked-by: Eddie Dong <eddie.dong@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Rename MSI-X struct, pci_msix, member from tables to table_entries
Tracked-On: #3265
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
support compiling system initialization code
to sys_init_mod.a
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
support compiling virtual platform hypercall to vp_hcall_mod.a
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
modified: Makefile
support compiling virtual platform trusty to vp_trusty_mod.a
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
modified: Makefile
support compiling virtual platform device model layer
to vp_dm_mod.a
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
modified: Makefile
support compiling virtual platform base layer to
vp_base_mod.a
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
modified: Makefile
support compiling hw management code to hw_mod.a
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
modified: Makefile
support compiling boot code to boot_mod.a
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
modified: Makefile
HV has been divided into the following layers
according to Jason's modularization documentation
high: 70 -- system initialization
60 -- virtual platform hypercall
50 -- virtual platform trusty
40 -- virtual platform device model
30 -- virtual platform base
20 -- hardware management
10 -- platform boot
low: 00 -- library
this patch is only for library layer,
support compiling library layer to lib_mod.a
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
modified: Makefile
This patch introduces check_vm_vlapic_state API instead of is_lapic_pt_enabled
to check if all the vCPUs of a VM are using x2APIC mode and LAPIC
pass-through is enabled on all of them.
When the VM is in VM_VLAPIC_TRANSITION or VM_VLAPIC_DISABLED state,
following conditions apply.
1) For pass-thru MSI interrupts, interrupt source is not programmed.
2) For DM emulated device MSI interrupts, interrupt is not delivered.
3) For IPIs, it will work only if the sender and destination are both in x2APIC mode.
Tracked-On: #3253
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch introduces vLAPIC state for a VM. The VM vLAPIC state can
be one of the following
* VM_VLAPIC_X2APIC - All the vCPUs/vLAPICs (Except for those in Disabled mode) of this
VM use x2APIC mode
* VM_VLAPIC_XAPIC - All the vCPUs/vLAPICs (Except for those in Disabled mode) of this
VM use xAPIC mode
* VM_VLAPIC_DISABLED - All the vCPUs/vLAPICs of this VM are in Disabled mode
* VM_VLAPIC_TRANSITION - Some of the vCPUs/vLAPICs of this VM (Except for those in Disabled mode)
are in xAPIC and the others in x2APIC
Upon a vCPU updating the IA32_APIC_BASE MSR to switch LAPIC mode, this
API is called to sync the vLAPIC state of the VM. Upon VM creation and reset,
vLAPIC state is set to VM_VLAPIC_XAPIC, as ACRN starts the vCPUs vLAPIC in
XAPIC mode.
Tracked-On: #3253
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
is_xapic_enabled API returns true if vLAPIC is in xAPIC mode. In
all other cases, it returns false.
Tracked-On: #3253
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Remove static and inline attributes to the API is_x2apic_enabled
and declare a prototype in vlapic.h. Also fix the check performed on guest
APICBASE_MSR value to query vLAPIC mode.
Tracked-On: #3253
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch changes the code in vlapic_set_apicbase for the following reasons
1) Better readability as it first checks if the new value programmed into
MSR is any different from the existing value cached in guest structures
2) Check if both bits 11:10 are set before enabling x2APIC mode for guest.
Current code does not check if Bit 11 is set.
3) Add TODO in the comments, to detail about the current gaps in
IA32_APIC_BASE MSR emulation.
Tracked-On: #3253
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
When the SOS kernel/pre-launched OS access the 0xCF8/0xCFC, it will cause
the vm-exit and then the hypervisor tries to emulate the PCI_cfg access.
0xCF8 write: The bdf/reg is captured. cache_reg = value & (0xFF);
0xCFC-0xCFF read/write: offset = address - 0xCFC. Then cached_reg + offset is
used as the offset to access the pci_cfg.
If the aligned reg is passed in 0xCF8 register, it can work well. But when
the unaligned reg is passed in 0xCF8 register, the cached_reg + offset will cause
that the incorrect pci_cfg offset is accessed. For example:
The cached_reg = 0x02(Device_ID offset) based on the value passed from 0xCF8
offset = 2 based on 0xCFC-0xCFF address.
Then cached_reg + offset is used as the offset(PCI_CMD_REG)
In fact the unaligned reg can work well on the real HW.
So the cached_reg should be aligned to handle the unaligned reg passed in
0xCF8 reg.
Tracked-On: #3249
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
V1:Initial Patch
Modularize vpic. The current patch reduces the usage
of acrn_vm inside the vpic.c file.
Due to the global natire of register_pio_handler, where
acrn_vm is being passed, some usage remains.
These needs to be a separate "interface" file.
That will come in smaller newer patch provided
this patch is accepted.
V2:
Incorporated comments from Jason.
V3:
Fixed some MISRA-C Violations.
Tracked-On: #1842
Signed-off-by: Arindam Roy <arindam.roy@intel.com>
Reviewed-by: Xu, Anthony <anthony.xu@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
This commit extract pm io handler registration code to register_pm_io_handler()
to reduce the cyclomatic complexity of create_vm() in order to be complied with
MISRA-C rules.
Tracked-On: #3227
Signed-off-by: Yan, Like <like.yan@intel.com>
When the lapic is passthru, vpic and vioapic cannot be used anymore. In
current code, user can still inject vpic interrupt to Guest OS, this is
not allowed.
This patch remove the vpic and vioapic initiate functions during
creating VM with lapic passthru. But the APIs in vpic and vioapic are
called in many places, for these APIs, follow the below principles:
1. For the APIs which will access uninitiated variables, and may case
hypervisor hang, add @pre to make sure user should call them after vpic or
vioapic is initiated.
2. For the APIs which only return some static value, do noting with them.
3. For the APIs which user will called to inject interrupt, such as
vioapic_set_irqline_lock or vpic_set_irqline, add condition in these
APIs to make sure it only inject interrupt when vpic or vioapic is
initiated. This change is to make sure the vuart or hypercall need not
to care whether lapic is passthru or the vpic and vioapic is initiated
or not.
Tracked-On: #3227
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
On SDC scenario, SOS VM id is fixed to 0 so some hypercalls from guest
are using hardcoded "0" to represent SOS VM, this would bring issues
for HYBRID scenario which SOS VM id is non-zero.
Now introducing a new VM id concept for DM/VHM hypercall APIs, that
return a relative VM id which is from SOS view when create VM for post-
launched VMs. DM/VHM could always treat their own vm id is "0". When they
make hypercalls, hypervisor will convert the VM id to the absolute id
when dispatch the hypercalls.
Tracked-On: #3214
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@Intel.com>
Changes:
- In current design, the hypercall is only allowed calling from SOS or
trusty VM, so separate the trusty hypercalls from dispatch_hypercall().
The vm parameter which referenced by hcall_xxx() should be SOS VM;
- do not inject #UD for hypercalls from non-SOS, just return -ENODEV;
Tracked-On: #3214
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@Intel.com>
According to SDM vol1 13.3:
Write 1 to reserved bit of XCR0 will trigger GP.
This patch make ACRN behavior align with SDM definition.
Tracked-On: #3239
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch fix potential null pointer dereference
1, will access null pointer if 'context' is null.
2, if entry already been added to the VM when add
intx entry for this vm, but parameter virt_pin
is not equal to entry->virt_sid.intx_id.pin. So
will saves this entry address to
vpin_to_pt_entry[entry->virt_sid.intx_id.pin] and
vpin_to_pt_entry[virt_pin]. In this case, this entry
will be freed twice.
Tracked-On: #3217
Signed-off-by: Tianhua Sun <tianhuax.s.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Host ACPI parsing is needed during initialization only, not in run time.
Hence we don't need to clear U flag for memory in reserved or ACPI type
E820 entries.
- move enable_smep() and enable_smap() to the end of init_pcpu_post(),
so stac()/clac() can be removed from any init code before this point.
- call init_seed() before init_pcpu_post(), and rmeove stac()/clac() from
init_seed().
Tracked-On: #3194
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Need to call hv_access_memory_region_update() explicitly for DRHD
registers to correctly grant access rights for hypervisor.
Currently, other hv_access_memory_region_update() calls happen to
cover the DRHD addresses for currently supported platforms.
Tracked-On: #3194
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
The memory size and IOMMU number are refined to meet with ICL board requirement.
Otherwise the ACRN hypervisor can't be booted on the new ICL board.
ICL(the abbreviation of Ice Lake) is the next generation platform based on 10nm.
CPU is based on Sunny Cove microarchitecture and GPU is based on gen11.
The new board is named as icl-rvp.
Tracked-On: #3216
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
Currently vlapic id of SOS VM is virtualized, it is indexed by vcpuid in
physical APIC id sequence, but CPUID 0BH leaf still report physical
APIC ID. In SDC/INDUSTRY scenario they are identical mapping so no issue
occured. In hybrid mode this would be a problem because vAPIC ID might
be different with pAPIC ID. We need to make the APIC ID which returned from
CPUID consistent with the one returned from LAPIC register.
Tracked-On: #3214
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Hybrid scenario will run 3 VMs: one pre-launched VM, one pre-launched SOS VM
and one post-launched Standard VM.
Tracked-On: #3214
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
to support grub multiboot for nuc7i7bnh, we should put hv ram start
at a suitable address as SOS bzImage may need use 0x1000000
Tracked-On: #3214
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Reviewed-by: Victor Sun <victor.sun@intel.com>
The VM IDs which is high or equal then CONFIG_MAX_VM_NUM are all
invalid VM IDs, the MACRO has never been referenced in code, so
remove it;
Tracked-On: #3214
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
The vcpu num could be calculated based on pcpu_bitmap when prepare_vcpu()
is done, so remove this redundant configuration item;
Tracked-On: #3214
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
vm_apicid2vcpu_id() might return invalid vcpu id, when this happens
we should return -1 in vlapic_x2apic_pt_icr_access();
Tracked-On: #3214
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
The print message of source and target vcpu id is incorrect, fix it.
Tracked-On: #3214
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Zephyr kernel is stripped ram image, its entry and load address
are explicitly defined in vm configurations, hypervisor will load
Zephyr directly based on these configurations.
Currently we only support boot Zephyr from protected mode.
Tracked-On: #3214
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Some OS like Zephyr need to run at 0x100000, so modify the ve820 table
accordingly;
Tracked-On: #3214
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Previously multiboot mods[0] is designed for kernel module for all
pre-launched VMs including SOS VM, and mods[0].mm_string is used
to store kernel cmdline. This design could not satisfy the requirement
of hybrid mode scenarios that each VM might use their own kernel image
also ramdisk image. To resolve this problem, we will use a tag in
mods mm_string field to specify the module type. If the tag could
be matched with os_config of VM configurations, the corresponding
module would be loaded;
Tracked-On: #3214
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Previously the bootargs of SOS_VM is stored in a text file and stitched
into multiboot mods[0].string whereas the bootargs of PRE_LAUNCHED_VM is
stored in vm_configurations.c. Given the mods[].string will be used to
store Kernel image signature under hybrid mode, move the bootargs of SOS_VM
to vm configurations also to make it consistent with PRE_LAUNCHED_VM;
Tracked-On: #3214
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Use a misc_cfg.h in each board configs folder so that VM configurations
could include board specific MACROs;
Tracked-On: #3214
Signed-off-by: Victor Sun <victor.sun@intel.com>
Different kernel has different load method, it should be configurable
in vm configurations;
Tracked-On: #3214
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
For a Linux guest, the kernel load address should be gotten from zeropage
even for a pre-launched VM;
Tracked-On: #3214
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Currently the algorithm of direct_boot_sw_loader() is Linux bzImage specific,
so separate the bzImage specific loader code from it to make the api more
generic for other OS;
Tracked-On: #3214
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
The guest OS of ACRN will not be limited to Linux, so refine the struct
of sw_linux to more generic sw_module_info. Currently bootargs and ramdisk
are only supported modules but we can include more modules in future;
Tracked-On: #3214
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Add vuart_deinit to vm shutdown so that the vuart resource can be
reset, and when the Guest VM restart, it could have right state.
Tracked-On: #2987
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
When enable Transmitter Holding Register Empty interrupts, vuart should
trigger interrupt when the THR is empty. In the previous code, only
after the data is written to THR, the flag thre_int_pending is set to
true. The thre_int_pending should also be true after THRE is set.
Besides, add logic to make sure interrupt is in right state when vuart
is initiated.
Tracked-On: #2987
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
is_msix, part of ptirq_msi_info, is not used in the code.
Tracked-On: #3205
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Since ACPI 2.0 a new field has been added to the table, X_FirmwareControl of type GAS,
which is 64bit. So use it conditionally.
Tracked-On: #3198
Signed-off-by: Tw <wei.tan@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
Currently when get_rsdp is called, the EFI depriv_boot env is not initialized.
In such case it will fallback to the legacy mechanism of ACPI table.
If the ACPI table based on legacy mechanism is not found, it will fail to get
the ACPI table and then the system will hang.
On the old platform it still can parse the ACPI table from legacy mechanism.
In fact when EFI RSDP exists, the EFI RSDP is preferred instead of legacy ACPI
RSDP.
In order to avoid multiple calling of depriv_init_boot, the init_boot_operations
is renamed and called after X2apic is enabled(early_init_lapic).
Tracked-On: #3184
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Currently the get_rsdp() will be called several times and on some
platform it needs to scan the signature of "RSP ptr" in BIOS EBDA region
and 0xE0000-0xFFFFF region. It is slow.
So after the RSDP is parsed, it will be assigned to acpi_rsdp.
Tracked-On: #3184
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
According to Chap 23.8 RESTRICTIONS ON VMX OPERATION, Vol 3, SDM:
"Any attempt to set one of these bits to an unsupported value while in VMX
operation (including VMX root operation) using any of the CLTS, LMSW, or
MOV CR instructions causes a general-protection exception."
So we don't need to trap them out then inject the GP in hypervisor.
Tracked-On: #2561
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
FuSa requires setting CR4.SMAP/SMEP/PKE will invalidate the TLB. However,
setting CR4.SMAP will invalidate the TLB on native while not in non-root mode.
To make sure this, we will trap CR4.SMAP/SMEP/PKE setting to invalidate the TLB
in root mode.
Tracked-On: #2561
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Since the vapic_id is from VM, need to check for pre-condition before passing
vcpu_id to vcpu_from_vid. This is in the path of LAPIC passthrough ICR
access
Tracked-On: #3170
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Present SGX related MSRs to guest if SGX is supported.
- MSR_IA32_SGXLEPUBKEYHASH0 ~ MSR_IA32_SGXLEPUBKEYHASH3:
SGX Launch Control is not supported, so these MSRs are read only.
- MSR_IA32_SGX_SVN_STATUS:
read only
- MSR_IA32_FEATURE_CONTROL:
If SGX is support in VM, opt-in SGX in this MSR.
- MSR_SGXOWNEREPOCH0 ~ MSR_SGXOWNEREPOCH1:
The two MSRs' scope is package level, not allow guest to change them.
Still leave them in unsupported_msrs array.
Tracked-On: #3179
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
If sgx is supported in guest, present SGX capabilities to guest.
There will be only one EPC section presented to guest, even if EPC
memory for a guest is from muiltiple physcial EPC sections.
Tracked-On: #3179
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Yan, Like <like.yan@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Build EPT entries for SGX EPC resource for VMs.
- SOS: EPC resrouce will be removed from EPT of SOS, don't support SGX virtualization for SOS.
- Non-SOS: build ept mapping for EPC resource for guest.
Guest base address and size is specified in vm configuration.
Tracked-On: #3179
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add EPC information in vm configuration structure.
EPC information contains the EPC base and size allocated to a VM.
Tracked-On: #3179
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Get the platform EPC resource and partiton the EPC resource for VMs
according to VM configurations.
Don't support sgx capability in SOS VM.
init_sgx is called during platform bsp initialization.
If init_sgx() fails, consider it as configuration error, panic the system.
init_sgx() fails if one of the following happens when at least one VM requests
EPC resource if no enough EPC resource for all VMs.
No further check if sgx is not supported by platform or not opted-in in BIOS,
just disable SGX support for VMs.
Tracked-On: #3179
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
When we call reset_vm() function to reset vm, the vm state
should be reset to VM_CREATED as well.
Tracked-On: #3182
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Fix a logic error when set iommu page walk coherent.
Tracked-On: #3160
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
VM Name length is restricted to 32 characters. kata creates
a VM name with GUID added as a part of VM name making it around
80 characters. So increasing this size to 128.
v1->v2:
It turns out that MAX_VM_OS_NAME_LEN usage in DM and HV are for
different use cases. So removing the macro from acrn_common.h.
Definied macro MAX_VMNAME_LEN for DM purposes in dm.h. Retaining
original macron name MAX_VM_OS_NAME_LEN for HV purposes but defined
in vm_config.h.
Tracked-On: #3138
Signed-off-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Define a static mptable array and each VM could index its vmptable by
vm id, then mptable is not needed in vm configurations;
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
In current code, vpci do the pci enumartion and add pci devices to the
context table of iommu.
Need to enable iommu DMA address translation later than vpci init.
Otherwise, in UEFI platform, there will be a shot time that address translation
is enabled, but the context table is not setup.
For the devices active in UEFI environment will have problem on address translation.
Tracked-On: #3160
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
At the time the guest is switching to X2APIC mode, different VCPUs in the
same VM could expect the setting of the per VM msr_bitmap differently,
which could cause problems.
Considering different approaches to address this issue:
1) only guest BSP can update msr_bitmap when switching to X2APIC.
2) carefully re-write the update_msr_bitmap_x2apic_xxx() functions to
make sure any bit in the bitmap won't be toggled by the VCPUs.
3) make msr_bitmap as per VCPU.
We chose option 3) because it's simple and clean, though it takes more
memory than other options.
BTW, need to remove const modifier from update_msr_bitmap_x2apic_xxx()
functions to get it compiled.
Tracked-On: #3166
Signed-off-by: Zide Chen <zide.chen@intel.com>
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
APL NUC would expose different MWAIT support status with different
BIOS configuration, then the acpi idle driver would have problem if
we provide MWAIT Cx data only. Now we will enforce guest enter port
IO Cx even BIOS expose support of MWAIT.
Given all Broxton family share same port IO Cx data, we use a unified
struct cpu_cx_data cx_bxt[] for all Broxton SoCs;
Tracked-On: #3158
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
The previous function just check the pstate target value in PERF_CTL msr
by indexing px data control value which comes from ACPI table, this would
bring a bug in the case that guest is running intel_pstate_driver:
the turbo pstate target value from intel_pstate driver is in a range
instead of fixed value in ACPI _PSS table, thus the turbo px request would
be rejected. This patch fixed this issue.
Tracked-On: #3158
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Add Px/Cx data of Intel Core(TM) i7-8650U CPU which used by NUC7i7DNH to
enable guest controlled CPU power states;
Tracked-On: #3158
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
filter out prelaunched vm memory from e820 table
and unmap prelaunched vm memory from ept table
before boot service OS
Tracked-On: #3148
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
- add the GUEST_FLAG_HIGHEST_SEVERITY flag to indicate that the guest has
privilege to reboot the host system.
- this flag is statically assigned to guest(s) in vm_configurations.c in
different scenarios.
- implement reset_host() function to reset the host. First try the ACPI
reset register if available, then try the 0xcf9 PIO.
Tracked-On: #3145
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
And make related changes accordingly:
Remove calling of get_vm_config()
Remove local variables vm and acrn_vm_config
Tracked-On: #3022
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
And make other related changes accordingly:
Remove pci_pdev_enumeration_cb define
Create init_vdevs() to iterate through the pdev list and create vdev for each pdev
Export num_pci_pdev and pci_pdev_array as globals in header file
Minor cosmetic fix:
Remove trailing whitespace
Tracked-On: #3022
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
ACRN supports LAPIC emulation for guests using x86 APICv. When guest OS/BIOS
switches from xAPIC to x2APIC mode of operation, ACRN also supports switching
froom LAPIC emulation to LAPIC passthrough to guest. User/developer needs to
configure GUEST_FLAG_LAPIC_PASSTHROUGH for guest_flags in the corresponding
VM's config for ACRN to enable LAPIC passthrough.
This patch does the following
1)Fixes a bug in the abovementioned feature. For a guest that is
configured with GUEST_FLAG_LAPIC_PASSTHROUGH, during the time period guest is
using xAPIC mode of LAPIC, virtual interrupts are not delivered. This can be
manifested as guest hang when it does not receive virtual timer interrupts.
2)ACRN exposes physical topology via CPUID leaf 0xb to LAPIC PT VMs. This patch
removes that condition and exposes virtual topology via CPUID leaf 0xb.
Tracked-On: #3136
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
This patch removes hard-coded interfaces in .rst files and
refers to the definition via doxygen style comments.
This patch mainly focus on Hypervisor part.
Other parts will be covered in seperate patches.
Tracked-On: #1595
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
for ctx->flags is protected by scheduler lock, so not need
to set lock again.
Tracked-On: #3130
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
the pcpu just write its own vmcs, not need spinlock.
and the arch.lock not used other places, remove it too.
Tracked-On: #3130
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
add spinlock to dmar_enable_qi & dmar_disable_qi to protect
struct dmar_unit variables; keep consistent with other same
level functions.
Tracked-On: #3130
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
For pre-launched VMs, currently we set all vbars to 0s initially in
bar emulation code, guest OS will reprogram the bars when it sees the bars are uninited (0s).
We consider this is not the right solution, change to populate the
vbars (to non zero valid pci hole address) based on the vbar base
addresses predefined in vm_config.
Store a pointer to acrn_vm_pci_ptdev_config in struct pci_vdev
Tracked-On: #3022
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Rename vdev_pt_cfgwrite_bar to vdev_pt_write_vbar
Misra-c violation fix:
Add missing else for find_vdev()
Fix more than one exit (return) in function
vdev_pt_cfgwrite_bar/vdev_pt_write_vbar
Tracked-On: #3022
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
now only SOS need decide boot with de-privilege or direct boot mode, while
for other pre-launched VMs, they should use direct boot mode.
this patch merge boot/guest/direct_boot_info.c &
boot/guest/deprivilege_boot_info.c into boot/guest/vboot_info.c,
and change init_direct_vboot_info() function name to init_general_vm_boot_info().
in init_vm_boot_info(), depend on get_sos_boot_mode(), SOS may choose to init
vm boot info by setting the vm_sw_loader to deprivilege specific one; for SOS
using DIRECT_BOOT_MODE and all other VMS, they will use general_sw_loader as
vm_sw_loader and go through init_general_vm_boot_info() for virtual boot vm
info filling.
this patch also move spurious handler initilization for de-privilege mode from
boot/guest/deprivilege_boot.c to boot/guest/vboot_info.c, and just set it in
deprivilege sw_loader before irq enabling.
Changes to be committed:
modified: Makefile
modified: arch/x86/guest/vm.c
modified: boot/guest/deprivilege_boot.c
deleted: boot/guest/deprivilege_boot_info.c
modified: boot/guest/direct_boot.c
renamed: boot/guest/direct_boot_info.c -> boot/guest/vboot_info.c
modified: boot/guest/vboot_wrapper.c
modified: boot/include/guest/deprivilege_boot.h
modified: boot/include/guest/direct_boot.h
modified: boot/include/guest/vboot.h
new file: boot/include/guest/vboot_info.h
modified: common/vm_load.c
modified: include/arch/x86/guest/vm.h
Tracked-On: #1842
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Add @pre for some functions, and fix outdated @pre statements
Tracked-On: #3056
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Put the cfgwrite code in write_cfg() for both sos and pre-launched VMs, and
remove sharing_mode_cfgwrite() and partition_mode_cfgwrite().
Rename functions used by write_cfg():
vhostbridge_cfgwrite --> vhostbridge_write_cfg
vdev_pt_cfgwrite --> vdev_pt_write_cfg
vmsi_cfgwrite --> vmsi_write_cfg
vmsix_cfgwrite --> vmsix_write_cfg
Fix @pre for functions
Tracked-On: #3056
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Put the cfgread code in read_cfg() for both sos and pre-launched VMs, and
remove sharing_mode_cfgread() and partition_mode_cfgread().
Rename functions used by read_cfg():
vhostbridge_cfgread --> vhostbridge_read_cfg
vdev_pt_cfgread --> vdev_pt_read_cfg
vmsi_cfgread --> vmsi_read_cfg
vmsix_cfgread --> vmsix_read_cfg
Tracked-On: #3056
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Put the deinit code in deinit_prelaunched_vm_vpci() for both sos and pre-launched VMs, and
remove sharing_mode_vpci_deinit() and partition_mode_vpci_deinit().
Rename functions used by deinit():
vhostbridge_deinit --> deinit_vhostbridge
vmsi_deinit --> deinit_vmsi
vmsix_deinit --> deinit_vmsix
post_launched_vm_vpci_deinit --> deinit_post_launched_vm
Tracked-On: #3056
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Put the init code in init_vdev_for_pdev for both sos and pre-launched VMs, and
remove sharing_mode_vpci_init() and partition_mode_vpci_init().
Rename functions used by init_vdev_for_pdev:
vhostbridge_init --> init_vhostbridge
vmsi_init --> init_vmsi
vmsix_init --> init_vmsix
Tracked-On: #3056
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Use local variable msix instead of vdev->msix, vdev_pt_remap_msix_table_bar has
already defined a local variable msix (&vdev->msix), use msix instead of
vdev->msix to simplify the code.
Fix @pre for functions
Rename pci_bar_base to get_bar_base
Fix typo in comment
Tracked-On: #3056
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Currently host bridge emulation and bar emulation are only for pre-launched vms,
use is_prelaunched_vm to check if it is for pre-launched vms when calling
init/deinit/cfgread/cfgwrite, also use is_hostbridge() to check if the access if
for host bridge, so that these functions can be unified for sos and pre-launched
vm in subsequent commits.
Move is_hostbridge function to vpci_priv.h so that it can be used by multiple
files.
vhostbridge_cfgread/vhostbridge_cfgwrite: return -ENODEV if the pci cfg access is not
targeted for vhostbridge so that cfgread/cfgwrite functions can be unified for sos and
pre-launched vm in subsequent commits
Fix @pre for functions
Tracked-On: #3056
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Rename the function to find_vdev_for_sos for the following reasons:
1. meet the <verb>_<nouns> function name guidelines
2. remove sharing_mode from the function name
Tracked-On: #3056
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Create the init_vdev_pt() function to host bar emulation initialization code
Add design philosophy for bar emulation
Move common functions to pci.h as they are generic and can be used by other
files.
Rename is_valid_bar to is_bar_supported and keep it as a private local function
in pci_pt.c
Tracked-On: #3056
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
The definition of CONFIG_REMAIN_1G_PAGES has been removed by patch (4627cd4d HV: build: drop useless files).
So, remove the whole CONFIG_REMAIN_1G_PAGES in repo.
---
v1 -> v2:
Address Fei's comment about changing reserving_1g_pages from int32_t to int64_t
Address Jason's comment about adding MACRO NUM_REMAIN_1G_PAGES
Tracked-On: #3128
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Reviewed-by: Li, Fei1 <fei1.li@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
remove some unnecessary includes,
some can cause reverse dependency.
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
modified: acpi_parser/acpi_ext.c
modified: acpi_parser/dmar_parse.c
modified: boot/acpi_base.c
modified: boot/guest/direct_boot_info.c
modified: include/arch/x86/per_cpu.h
Handle the PIO reset register that is defined in host ACPI:
Parse host FADT table to get the host reset register info, and emulate
it for Service OS:
- return all '1' for guest reads because the read behavior is not defined
in ACPI.
- ignore guest writes with the reset value to stop it from resetting host;
if guest writes other values, passthru it to hardware in case the reset
register supports other functionalities.
Tracked-On: #2700
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch implements triple fault vmexit handler and base on VM types:
- post-launched VMs: shutdown_target_vm() injects S5 PIO write to request
DM to shut down the target VM.
- pre-launched VMs: shut down the guest.
- SOS: similarly, but shut down all the non real-time post-launched VMs that
depend to SOS before shutting down SOS.
Tracked-On: #2700
Signed-off-by: Zide Chen <zide.chen@intel.com>
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- post-launched RTVM: intercept both PIO ports so that hypervisor has a
chance to set VM_POWERING_OFF flag.
- all other type of VMs: deny these 2 ports from guest access so that
guests are not able to reset host.
Tracked-On: #2700
Signed-off-by: Zide Chen <zide.chen@intel.com>
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
For pre-launched VMs and SOS, VM shutdown should not be executed in the
current VM context.
- implement NEED_SHUTDOWN_VM request so that the BSP of the target VM can shut
down the guest in idle thread.
- implement shutdown_vm_from_idle() to shut down target VM.
Tracked-On: #2700
Signed-off-by: Zide Chen <zide.chen@intel.com>
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
1) According SDM Vol 3, Chap 29.1.2, Any VM exit caused by TPR virtualization
is trap-like: the instruction causing TPR virtualization completes before the VM
exit occurs (for example, the value of CS:RIP saved in the guest-state area of
the VMCS references the next instruction). So we need to retain the RIP.
2) The previous implement only consides the situation the guest will reduce the
TPR. However, the guest will increase it. So we need to update the PPR before we
find a deliverable interrupt. For examples: a) if the guest increase the TPR before
a irq windows vmexit, we need to update the PPR when check whether there has a pending
delivery interrupt or not; b) if the guest increase the TPR, then an external irq raised,
we need to update the PPR when check whether there has a deliverable interrupt to inject
to guest.
Tracked-On: #1842
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Reviewed-by: Yu Wang <yu1.wang@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
For prelaunched VM, Service OS and postlaunched RT VM, we only need the vRTC
provides backed-up date, so we could use the simple vRTC which implemented
in hypervisor. For postlaunched VM (which is not a RT VM), we needs the device
module to emulate the vRTC for it.
Tracked-On: #1842
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Reviewed-by: Yu Wang <yu1.wang@intel.com>
Previously we use Kconfig of DMAR_PARSE_ENABLED to choose pre-defined DMAR info
or parse it at runtime, at the same time we use MACRO of CONFIG_CONSTANT_ACPI
to decide whether parse PM related ACPI info at runtime. This looks redundant
so use a unified ACPI_PARSE_ENABLED Kconfig to replace them.
Tracked-On: #3107
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Split acpi.c to acpi_base.c and acpi_ext.c. The former one will
go FuSa and the later one will not;
Tracked-On: #3107
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Keep acpi.h as the only acpi api interface;
Tracked-On: #3107
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The acpi parse code would not go FuSa cert, move acpi parser related code
to a separate folder is helpful on FuSa isolation.
This patch moves dmar parse code;
Tracked-On: #3107
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
now there are 2 static_checks.c,
./arch/x86/static_checks.c
./common/static_checks.c
they are used for static checks when build time,
this check should not belong to any HV layer from
modularization view, then add and move it to pre_build folder.
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
modified: Makefile
deleted: common/static_checks.c
renamed: arch/x86/static_checks.c -> pre_build/static_checks.c
There're some instructions which not support bit 0(w bit) flag but which
memory opcode size is fixed and the memory opcode size is not equal to the
register opcode size. In our code, there is movzx (which opcode is 0F B7)
which memory opcode size is fixed to 16 bits. So add a flag VIE_OP_F_WORD_OP
to indicate a instruction which memory opcode size is fixed to 16 bits.
Tracked-On: #1337
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
now this MACRO is used in atomic.h and bits.h,
move it from cpu.h to atomic.h to avoid
reverse dependency(i.e. from lower layer to upper one)
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
This patch refines 'init_percpu_lapic_id' to move the error
handling to 'init_pcpu_pre'.
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
This patch removes the dynamic memory allocation in dmar_parse.c.
v1 -> v2:
- rename 'const_dmar.c' to 'dmar_info.c' and move it to
'boot' directory
- add CONFIG_DMAR_PARSE_ENABLED check for function declaration
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
This patch adds default DRHD MACROs in template platform acpi info.
It is the preparation patch to remove dynamic memory allocation
in dmar_parse.c. So that the dmar info can be initialized with
default size and values when CONFIG_DMAR_PARSE_ENABLED is set
to y.
v1 -> v2: no change
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Add MSR_IA32_MISC_ENABLE to emulated_guest_msrs to enable the emulation.
Init MSR_IA32_MISC_ENABLE for guest.
Tracked-On: #2834
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
According to SDM Vol4 2.1, modify vcpuid according to msr ia32_misc_enable:
- Clear CPUID.01H: ECX[3] if guest disabled monitor/mwait.
- Clear CPUID.80000001H: EDX[20] if guest set XD Bit Disable.
- Limit the CPUID leave maximum value to 2 if guest set Limit CPUID MAXVal.
Tracked-On: #2834
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Guest MSR_IA32_MISC_ENABLE read simply returns the value set by guest.
Guest MSR_IA32_MISC_ENABLE write:
- Clear EFER.NXE if MSR_IA32_MISC_ENABLE_XD_DISABLE set.
- MSR_IA32_MISC_ENABLE_MONITOR_ENA:
Allow guest to control this feature when HV doesn't use this feature and hw has no bug.
vcpuid update according to the change of the msr will be covered in following patch.
Tracked-On: #2834
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Merge two parts of different definitions for MSR_IA32_MISC_ENABLE fields.
- use the prefix "MSR_IA32_" to align with others
- Change MSR_IA32_MISC_ENABLE_XD to MSR_IA32_MISC_ENABLE_XD_DISABLE to
align the meaning of the filed since it is "XD bit disable"
Use UL instead of U as the filed bit mask because MSR_IA32_MISC_ENABLE is 64-bit.
Tracked-On: #2834
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
clean up a few MISRA C violations that can be fixed by code change in vboot files
Tracked-On: #861
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
struct vboot_candidates is private, so move it into source file, and change it
to a more suitable name vboot_bootloader_map.
this patch also add sos_boot_mode to indicate if the sos boot is using de-privilege
or direct boot mode.
Tracked-On: #1842
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
The interface struct & API changes like below:
struct uefi_context->struct depri_boot_context
init_firmware_operations()->init_vboot_operations()
init_firmware()->init_vboot()
firmware_init_irq()->init_vboot_irq()
firmware_get_rsdp()->get_rsdp_ptr()
firmware_get_ap_trampoline()->get_ap_trampoline_buf()
firmware_init_vm_boot_info()->init_vm_boot_info()
Tracked-On: #1842
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
currently, ACRN hypervisor can either boot from sbl/abl or uefi, that's
why we have different firmware method under bsp & boot dirs.
but the fact is that we actually have two different operations based on
different guest boot mode:
1. de-privilege-boot: ACRN hypervisor will boot VM0 in the same context as
native(before entering hypervisor) - it means hypervisor will co-work with
ACRN UEFI bootloader, restore the context env and de-privilege this env
to VM0 guest.
2. direct-boot: ACRN hypervisor will directly boot different pre-launched
VM(including SOS), it will setup guest env by pre-defined configuration,
and prepare guest kernel image, ramdisk which fetch from multiboot modules.
this patch is trying to:
- rename files related with firmware, change them to guest vboot related
- restruct all guest boot stuff in boot & bsp dirs into a new boot/guest dir
- use de-privilege & direct boot to distinguish two different boot operations
this patch is pure file movement, the rename of functions based on old assumption will
be in the following patch.
Changes to be committed:
modified: ../efi-stub/Makefile
modified: ../efi-stub/boot.c
modified: Makefile
modified: arch/x86/cpu.c
modified: arch/x86/guest/vm.c
modified: arch/x86/init.c
modified: arch/x86/irq.c
modified: arch/x86/trampoline.c
modified: boot/acpi.c
renamed: bsp/cmdline.c -> boot/cmdline.c
renamed: bsp/firmware_uefi.c -> boot/guest/deprivilege_boot.c
renamed: boot/uefi/uefi_boot.c -> boot/guest/deprivilege_boot_info.c
renamed: bsp/firmware_sbl.c -> boot/guest/direct_boot.c
renamed: boot/sbl/multiboot.c -> boot/guest/direct_boot_info.c
renamed: bsp/firmware_wrapper.c -> boot/guest/vboot_wrapper.c
modified: boot/include/acpi.h
renamed: bsp/include/firmware_uefi.h -> boot/include/guest/deprivilege_boot.h
renamed: bsp/include/firmware_sbl.h -> boot/include/guest/direct_boot.h
renamed: bsp/include/firmware.h -> boot/include/guest/vboot.h
modified: include/arch/x86/multiboot.h
Tracked-On: #1842
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Replace the vm state VM_STATE_INVALID to VM_POWERED_OFF.
Also replace is_valid_vm() with is_poweroff_vm().
Add API is_created_vm() to identify VM created state.
Tracked-On: #3082
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
vm_config.h has included types.h/acrn_common.h/vm_configurations.h,
acrn_common.h has included types.h, so remove the redundant includes;
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
This is to get rid of partition mode strings in comments
Tracked-On: #3056
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
In commit b68aee6ef1, acpi.c
removed "hypervisor.h" which includes "acrn_common.h", but
commit e2d723d4fa is depend on
"acrn_common.h", this caused build error.
Tracked-On: #3073
Signed-off-by: Victor Sun <victor.sun@intel.com>
Split vuart_write as its cyclomatic complexity is greater than 20.
Tracked-On: #2987
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Rename functions to be more unified.
Tracked-On: #2987
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The MACRO of CONFIG_CONSTANT_ACPI will be defined per scenario usage,
so move it from Kconfig to vm_configurations.h;
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Previously ACPI PM1A register info was hardcoded to 0 in HV for generic boards,
but SOS still can know the real PM1A info so the system would hang if user
trigger S3 in SOS. Enabling PM1A register info fixup will let HV be able to
intercept the operation on PM1A and then make basic function of S3 work for
all boards;
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
IRTE is freed if ptirq entry is released from remove_msix_remapping() or
remove_intx_remapping(). But if it's called from ptdev_release_all_entries(),
e.g. SOS shutdown/reboot, IRTE is not freed.
This patch adds a release_cb() callback function to do any architectural
specific cleanup. In x86, it's used to release IRTE.
On VM shutdown, vpci_cleanup() needs to remove MSI/MSI-X remapping on
ptirq entries, thus it should be called before ptdev_release_all_entries().
Tracked-On: #2700
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Rename 'type' in struct io_request to 'io_type' to be more readable.
Tracked-On: #3061
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This commmit added one more guest VM to the industry scenario, to
be aligned with the HLD for the industry usage.
With this commit, 4 VMs could be launched at maximum: 1 SOS VM and 3 post-launced VM.
Tracked-On: #3039
Signed-off-by: Yan, Like <like.yan@intel.com>
Rename structure acrn_vm_type to acrn_vm_load_order as it is used to
indicate the load order instead of the VM type.
Tracked-On: #2291
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Shared buffer is allocated by VM and is protected by SMAP.
Accessing to shared buffer between stac/clac pair will invalidate
SMAP protection.This patch is to remove these cases.
Fix minor stac/clac mis-usage,and add comments as stac/clac usage BKM
Tracked-On: #2526
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
As commit info of 2362e58509, the guest flags
of GUEST_FLAG_IO_COMPLETION_POLLING work for POST_LAUNCHED_VM only, this
patch fix the wrong setting in SOS_VM;
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
ACRN cleans up the IOMMU domain and other data structures that
represents the state of device assigment to POST_LAUNCHED_VM. This is
with the help of hypercalls from SOS DM. Under scenarios where DM
execution can get terminated abruptly or due to bugs in DM, hypercalls
responsible for cleaning up ACRN cannot happen. This leaves ACRN
device representation/resource assignment in an incorrect state.
This patch cleans up the IOMMU resource and other data structures
upon shutdown of POST_LAUNCHED_VM.
Tracked-On: #2700
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This scenario is typical for industry usage with 3 VMs: 1 pre-launched SOS VM,
1 post-launched user VM for HMI and 1 post-launched RT VM for real-time control.
Tracked-On: #3039
Signed-off-by: Yan, Like <like.yan@intel.com>
In Linux 8250 driver, it has different flags for UART ports. For COM1,
COM2 and COM3, UPF_SKIP_TEST is set, which is used to skip the loopback
test for the port. But for COM4, UPF_SKIP_TEST is not set, so when
probing COM4, the driver will access MCR and MSR registers to make sure
the port is exsit. So, add support for MSR and MCR.
Default ports info:
COM1, ttyS0, 0x3F8
COM2, ttyS1, 0x2F8
COM3, ttyS2, 0x3E8
COM4, ttyS3, 0x2E8
Tracked-On: #2987
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Remove debug command 'vuart' which is used to change VM's console's base
and irq before bringing up with uefi.
But after vuart's resuffle, the gloable variables vuart_com_irq and
vuart_com_base is not used anymore, vuart gets the base and irq from
its configuration. So the command can not work.
Tracked-On: #2987
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Move the console related code from dm/vuart.c to debug/console.c as
console is not supported in release version.
Tracked-On: #2987
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
As there is a requirement for conmunication between VMs on uart port,
but for Pre-launched VM, the only way is to create vuart for each VM and
connect them at hypervisor side. So, the vuart code should be moved from
/debug to /dm so that they can also be used in release version.
For the console related code, as no need to support in release version,
so leave them at debug directory.
Tracked-On: #2987
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The DRHD MACROs are needed only when CONFIG_DMAR_PARSE_ENABLED set to n,
whereas the template platform_acpi_info.h is prepared for generic boards
that usually CONFIG_DMAR_PARSE_ENABLED is set to y, so remove these dummy
DRHD info MACROs.
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
hypervisor/arch/x86/configs/($CONFIG_BOARD) will store Board specific configs,
add a generic folder to store configs for generic boards that they can share
one build binary with minimal and common features in some scenarios like SDC.
Please be aware that BDF of pci devices are different on each board, so one
binary for LOGICAL_PARTITION scenario is not supported.
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The name NORMAL_VM does not clearly reflect the attribute that these VMs
are launched "later". POST_LAUNCHED_VM is closer to the fact
that these VMs are launched "later" by one of the VMs launched by ACRN.
Tracked-On: #3034
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
1) For some instructions (like movsx, movzx which we support), there're two operands
and the source operand size is not equal to the dest operand size. In this case,
if we update the memory operand size according to the bit 0(w bit) of opcode,
we will lost the register operand size. This patch tries to fix this by calculating
memory operand size when we want to use it.
2) Calculate memory operand size form operand size and the bit 0(w bit) of opcode
when we want to operate on memory operand.
Tracked-On: #1337
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- The pci device config is related to VM configurations, so move the device
mapping MACROs from pci_devices.h to vm_configurations.h. Also considering
pci_devices.h should be generated by offline parse tool, this code change
would decouple the relationship between VM configuration tool and target
paser tool;
- Another minor change is add post-fix in number for each PCI device subclass
name to make target parse tool interface friendly;
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
As SHARING_MODE and PARTITION_MODE are not used anymore, cleanup the
code.
Tracked-On: #2291
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
If the vmcall param passed from guest is representing a vmid, we should
make sure it is a valid one because it is a pre-condition of following
get_vm_from_vmid(). And then we don't need to do NULL VM pointer check
in is_valid_vm() because get_vm_from_vmid() would never return NULL.
Tracked-On: #2978
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
There are 2 reasons why SOS ve820 has to be separated from host e820:
- in hybrid mode, SOS may not own all the host memory.
- when SOS is being re-launched, it needs an untainted version of host
e820 to create SOS ve820.
This patch creates sos_e820 table for SOS and keeps host e820 intact
during SOS creation.
Tracked-On: #2700
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Enable connection mode for vuart, so that vuart in different VMs can set up
connection.
In pre-launched VM's configuration file, ttyS1 is set to be the connection
port. To enable it in post-launched VM, just add vuart configuration.
Tracked-On: #2987
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
In previous code, only for pre-launched VM, hypervisor would create
vuart console for each VM. But for post-launched VM, no vuart is
created.
In this patch, create vuart according to configuration in structure
acrn_vm_config. As the new configuration is set for pre-launched VM and
post-launched VM, and the vuart initialize process is common for each
VM, so, remove CONFIG_PARTITION_MODE from vuart related code.
Tracked-On: #2987
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add vuart config in acrn_vm_config struct, support configuring 2 vuarts for
each VM. The first vuart is used to work as VM's console. The second vuart
is used to connect to other VM's vuart. When the port base for a vuart
is set to 0, hypervisor will not create this vuart.
Tracked-On: #2987
Signed-off-by: Victor Sun <victor.sun@intel.com>
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Change sos_console to vm_console, as this command is used to switch
console between VMs.
Tracked-On: #2987
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The guest flags of GUEST_FLAG_IO_COMPLETION_POLLING work for NORMAL_VM only;
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
According to SDM 10.6.1, if dest fields is 0xffU for register
ICR operation, that means the IPI is for broadcast.
According to SDM 10.12.9, 0xffffffffU of dest fields for x2APIC
means IPI is for broadcast.
We add new parameter to vlapic_calc_dest() to show whether the
dest is for broadcast. For IPI, we will set it according to
dest fields. For ioapic and MSI, we hardcode it to false because
no broadcast for ioapic and MSI.
Tracked-On: #3003
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
It is better to use an unified MACRO. So, this patch moves AP_MASK to cpu.h
and removes the defination of the MACRO spanning different source files.
Tracked-On: #2991
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch just removes unnecessary indent before #include in pm.c.
Tracked-On: #2991
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch adds prefix 'p' before 'cpu' to physical cpu related functions.
And there is no code logic change.
Tracked-On: #2991
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
the problem is : System will crash when run crashme.
The root cause of this problem is that when the ACRN_REQUEST_EXCP flag is set by calling
the vcpu_make_request function, the flag is not cleared.
Add the following statement to the vcpu_inject_exception function to fix the problem:
bitmap_test_and_clear_lock(ACRN_REQUEST_EXCP, &vcpu->arch.pending_req);
Tested that one night, there was no crash.
Tracked-On: #2527
Signed-off-by: bing.li<bingx.li@intel.com>
Acked-by: Eddie Dong<eddie.dong@intel.com>
In theory, we should trap out all the x2apic MSR access if APICv is not enabled.
When "Use TPR shadow" and "Virtualize x2APIC mode" are enabled, we could disable
TPR interception; when APICv is fully enabled, besides TPR, we could disable all
MSR read, EOI and self-IPI interception; when we pass through lapic to guest, we
could disable all the MSR access interception except XAPICID/LDR read and ICR write.
Tracked-On: #1842
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
When in fully APICv mode, we enable VID. All pending delivery interrupts
will inject to VM before VM entry. So there is no pending delivery interrupt.
However, if VID is not enabled, we can only inject pending delivery interrupt
one by one. So we always need to do this check.
Tracked-On: #1842
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
apicv_advanced_inject_intr is used if APICv fully features are supported,
it uses PIR to inject interrupt. otherwise, apicv_basic_inject_intr is used.
it will use VMCS INTR INFO field to inject irq.
Tracked-On: #1842
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
The APICv ops is decided once the APICv feature on the physical platform is detected.
We will use apicv_advanced_ops if the physical platform support fully APICv feature;
otherwise, we will use apicv_basic_ops.
This patch only wrap the accept interrupt API for them.
Tracked-On: #1842
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Possible buffer overflow will happen in vlapic_set_tmr()
and vlapic_update_ppr(),this path is to fix them.
Tracked-On: #1252
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
1) Shouldn't try to set APIC-register virtualization if the physical doesn't
support APICV advanced mode.
2) Remove all APICv features VMCS setting when LAPIC is passed through to guest.
Tracked-On: #1842
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Not every instruction supports the operand-size bit (w). This patch try to correct
what done in commit-id 9df8790 by setting a flag VIE_OP_F_BYTE_OP to indicate which
instruction supports the operand-size bit (w).
This bug is found by removing VMX_PROCBASED_CTLS2_VAPIC_REGS VMCS setting when the
physical doesn't support this APICv feature. However, if emulated this in MRB board,
the android can't boot because when switch to trusty world, it will check
"Delivery Status" in ICR first. It turns out that this Bit Test instruction is not
emulated correctly.
Tracked-On: #1337
Signed-off-by: Qi Yadong <yadong.qi@intel.com>
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
This patch removes dead loop in stop_cpus because timeout never occurs.
If target cpu received a NMI and panic, it has called cpu_dead and stop_cpus success.
If target cpu is running, an IPI will be delivered to it and then call cpu_dead.
Tracked-On: #2991
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The physical core of lapic_pt vm should be reset for security and
correctness when shutdown the vm.
Tracked-On: #2991
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch makes the following changes:
- Add one parameter 'mask' to start_cpus for later use.
- Set cpu state as DEAD instead of dead loop when fail to start cpu.
- Panic when there are any failures when start cpus in init_cpu_post and host_enter_s3.
Tracked-On: #2991
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch remove the over design CPU_UP_TIMEOUT and
use CPU_UP_TIMEOUT and CPU_DOWN_TIMEOUT instead.
Tracked-On: #2991
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Currently, the previous configurations about guest_flags set by DM will
not be cleared when shutdown the vm. Then it might bring issue for the
next dm-launched vm.
For example, if we create one vm with LAPIC_PASSTHROUGH flag and shutdown it.
Then the next dm-launched vm will has the LAPIC_PASSTHROUGH flag set no matter
whether we set it in DM.
This patch clears all the DM set flags when shtudown vm.
Tracked-On: #2991
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Currently vpid is not released in reset_vcpu() hence the vpid resource
could be exhausted easily if guests are re-launched.
This patch assigns vpid according to the fixed mapping of runtime vm_id
and vcpu_id to guarantee the uniqueness of vpid.
Tracked-On: #2700
Signed-off-by: Zide Chen <zide.chen@intel.com>
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
- The target vm in most of hypercalls should be a NORMAL_VM, in some
exceptions it might be a SOS_VM, we should validate them.
- Please be aware that some hypercall might have limitation on specific
target vm like RT or SAFETY VMs, this leaves "TODO" in future;
- Unify the coding style:
int32_t hcall_foo(vm, target_vm_id, ...)
{
int32_t ret = -1;
...
if ((is_valid_vm(target_vm) && is_normal_vm(target_vm)) {
ret = ....
}
return ret;
}
Tracked-On: #2978
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The function vpci_set_ptdev_intr_info() is not compiled for
CONFIG_SHARING_MODE only any more so the #ifndef here is useless.
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Currently ptdev_release_all_entries() calls ptirq_release_entry() to
release ptdev IRQs, which is not sufficient because free_irq() is not
included in ptirq_release_entry().
Furthermore, function ptirq_deactivate_entry() and ptirq_release_entry()
have lots of overlaps which make the differences between them are not
clear.
This patch does:
- Adds ptirq_deactivate_entry() call in ptdev_release_all_entries() if the
irq has not already freed.
- Remove unnecessary code from ptirq_deactivate_entry() to make it do the
exact opposite to function ptirq_activate_entry(), except that
entry->allocated_pirq is not reset, which is not necessary.
- Added the missing del_timer() to ptirq_release_entry() to make it almost
opposite to ptirq_alloc_entry(); Added memset() to clear the whole entry,
which doesn't have impacts to the functionalities but keep the data structure
clean.
Tracked-On: #2700
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
If launch two UOS with same UUID by acrn-dm, current code path will
return same VM instance to the acrn-dm, this will crash the two UOS.
Check VM state and make sure it's in VM_STATE_INVALID state before
creating a VM.
Tracked-On: #2984
Signed-off-by: Cai Yulong <yulongc@hwtc.com.cn>
The 'boot_params' and 'entry' might be dereferenced after they were
positively checked for NULL. Refine checking logic to fix the issue.
Tracked-On: #2979
Signed-off-by: Qi Yadong <yadong.qi@intel.com>
Acked-by: Zhu Bing <bing.zhu@intel.com>
The previous will not check the EPT gpa correctly. This patch try to fix this.
Tracked-On: #2291
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
When shutting down SOS VM, the shared sbuf is released from guest OS, but
the per cpu sbuf pointers in hypervisor keep inact. This creates a problem
that after SOS is re-launched, hypervisor could write to the shared
buffer that no longer exists.
This patch implements sbuf_reset() and call it from reset_vcpu() to
reset sbuf pointers.
Tracked-On: #2700
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Add TPR below threshold implement for "Virtual-interrupt delivery" not support.
Windows will use it to delay interrupt handle.
Complete all the interrupts in IRR as long as they are higher priority than
current TPR. Once current IRR priority is less than current TPR enable TPR
threshold to IRR, so that if guest reduces the TPR threshold, it would be good
to take below TPR threshold exit and let interrupts to go thru.
Tracked-On: #1842
Signed-off-by: Zheng, Gen <gen.zheng@intel.com>
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
ACRN dumps host registers in case of an exception in root mode operation.
This patch adds CR2 register to the dump. It is useful for
page-fault debug in HV to know the offending address.
Tracked-On: #2969
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Enable vMCE feature to boot windows guest.
vMCE is set in EDX from Microsoft TLFS spec, to support windows guest
vMCA and vMCE should be supported by guest CPUID.
Support MSR_IA32_MCG_CAP and MSR_IA32_MCG_STATUS reading when vMCE is enabled,
but they are not emulated yet, so return 0 directly.
Tracked-On: #1867
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Reviewed-by: Yu Wang <yu1.wang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
In the presence of SOS, ACRN uses fallback_iommu_domain which is the same
used by SOS, to assign domain to devices during ACRN init. Also it uses
fallback_iommu_domain when DM requests ACRN to remove device from UOS domain.
This patch changes the design of assign/remove_iommu_device to avoid the
concept of fallback_iommu_domain and its setup. This way ACRN can commonly
treat pre-launched VMs bringup w.r.t. IOMMU domain creation.
Tracked-On: #2965
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
In the current design, logic partition scenario is supported
on KBL NUC i7 since there is no related configuration and
no the cooresponding boot loader supporting.
The boot loader supporting is done in the previous patch.
Add some configurations such physical PCI devices information,
virtual e820 table etc for KBL NUC i7 to enable logical
partition scenario.
In the logical partition of KBL NUC i7, there are two
pre-launched VM, this pre-launched VM doesn't support
local APIC passthrough now. The hypervisor is booted through
GRUB.
TODO: In future, Local APIC passthrough and some real time
fetures are needed for the logic partition scenario of KBL
NUC i7.
V5-->V6:
Update "Tracked-On"
Tracked-On: #2944
Signed-off-by: Xiangyang Wu <xiangyang.wu@linux.intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
In the current design, hypervisor only detects two kinds of
multiboot compiliant firwares (UEFI loader and non-UEFI loader),
It can't detect other multiboot compliant firware (such GRUB
loader) and can't detect UEFI loader explicitly since loader
name is not supported by UEFI loader (efi stub). In the
logical partition scenario on KBL NUC i7, one multiboot
compliant firware is used to boot hypervisor and load guest
OS image, and firware runtime service shall be disable to
avoid interference. So GRUB can be selected as a candidate
to enable logical partition scenario on KBL NUC i7.
Update firware detection and operations selecting logic to detect
more multiboot compiliant firware (such as GRUB and UEFI loader)
explicitly, different operations is selected according to the
boot load name through a static mapping table between boot load name
and firmware operations. GRUB loader can use the SBL operations
to handle multiboot information parsing and vm booting since
these multiboot compiliant firmware (SBL/ABL/GRUB) which boots
hypervisor (binary format), provides multiboot information and
the start address of guest OS image(binary format) in the same way,
and only runs on boot time.
From MISRA C view, viarble array is not allowed, so define the
static array for above mapping table;
From security view, it is better use strncmp insteads of strcmp.
TODO: In future, need to redesign boot moudle to suport different
boot loader, different VM boot, and different guest OS.
V2-->V3:
Update firmware detection logic to handle GRUB loader
which is need to provided multiboot information to the
hypervisor (such as the address of guest OS image);
V3-->V4:
Update firmware detection and operations selecting logic
to enable GRUB loader support in hypervisor;
V4-->V5:
Separte UEFI loader name supporting in a separate patch,
and update commit comment to make patch clearer.
V5-->V6:
Update "Tracked-On"
Tracked-On: #2944
Signed-off-by: Xiangyang Wu <xiangyang.wu@linux.intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
add new hypercall get platform information,
such as physical CPU number.
Tracked-On: #2538
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
ACRN builds mptable for pre-launched VMs. It uses CONFIG_PARTITION_MODE
to compile mptable source code and related support. This patch removes
the macro and checks if the type of VM is pre-launched to build mptable.
Tracked-On: #2941
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Enhance "vm_list" command in shell to Show VM UUID;
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Currently VM id of NORMAL_VM is allocated dymatically, we need to make
VM id statically for FuSa compliance.
This patch will pre-configure UUID for all VMs, then NORMAL_VM could
get its VM id/configuration from vm_configs array by indexing the UUID.
If UUID collisions is found in vm configs array, HV will refuse to
load the VM;
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Return true if vm configs is sanitized successfully, otherwise return false;
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The code mixed the usage on term of UUID and GUID, now use UUID to make
code more consistent, also will use lowercase (i.e. uuid) in variable name
definition.
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
1) In x2apic mode, when read ICR, we want to read a 64-bits value.
2) In x2apic mode, write self-IPI will trap out through MSR write when VID isn't enabled.
Tracked-On: #1842
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
We could call vlapic API directly, remove vlapic_rdmsr/wrmsr to make things easier.
Tracked-On: #1842
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
renamed: include/dm/pci.h -> include/hw/pci.h
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Now the io_emul.c is relates with arch,io_req.c is common,
move some APIs from io_emul.c to io_req.c as common like these APIs:
register_pio/mmio_emulation_handler
dm_emulate_pio/mmio_complete
pio_default_read/write
mmio_default_access_handler
hv_emulate_pio/mmio etc
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Move ‘emul_pio[]/default_io_read/default_io_write’
from struct vm_arch to struct acrn_vm
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
-- this api is related with arch_x86, then move to x86 folder
-- rename 'set_vhm_vector' to 'set_vhm_notification_vector'
-- rename 'acrn_vhm_vector' to 'acrn_vhm_notification_vector'
-- add an API 'get_vhm_notification_vector'
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
For Pre-launched VMs, ACRN uses mptable for reporting APIC IDs to guest OS.
In current code, ACRN uses physical LAPIC IDs for vLAPIC IDs.
This patch is to let ACRN use vCPU id for vLAPIC IDs and also report the same
when building mptable. ACRN should still use physical LAPIC IDs for SOS
because host ACPI tables are passthru to SOS.
Tracked-On: #2934
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Acked-by: Eddie Dong <eddie.dong@Intel.com>
ACRN uses CONFIG_PARTITION_MODE macro to compile out CPU_IRQ_ENABLE/DISABLE
APIs. With vector remapping enabled for pre-launched VMs, this is of no use.
And for VMs with LAPIC pass-thru, interrupts stay disabled in vmexit loop
with the help of is_lapic_pt() API.
Tracked-On: #2903
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Now the MAX supported VM number is defined explicitly for each scenario,
so move this config from Kconfig to VM configuration.
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Previously we use unified vm_config.c for all scenarios and use MACROs
for each configuration items, then the initialization of vm_configs[]
becomes more complicated when definition of MACROs increase, so change
the coding style that all configurable items could be explicitly shown in
vm_configuration.c to make code more readable.
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add, update '@return' and '@retval' statements to the API descriptions related
to vCPU operations.
Tracked-On: #1844
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
As vector re-mapping is enabled for pre-launched/partition mode VMs,
there is no more need for separate interrupt routine i.e.
partition_mode_dispatch_interrupt.
Tracked-On: #2879
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
For pre-launched VMs MSI/MSI-x configuration writes are not intercepted by ACRN.
It is pass-thru and interrupts land in ACRN and the guest vector is injected into
the VM's vLAPIC. With this patch, ACRN intercepts MSI/MSI-x config writes and take
the code path to remap interrupt vector/APIC ID as it does for SOS/UOS.
Tracked-On: #2879
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
To keep consistency between HV and DM about PM1A_CNT_ADDR,
it is better to replace the PM1A_CNT related MACROs used in DM
with VIRTUAL_PM1A_CNT related MACROs in acrn_common.h.
Tracked-On: #2865
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Acked-by: Eddie Dong <Eddie.dong@intel.com>
This patch mainly does the following:
- Replace prefix RT_VM_ with VIRTUAL_.
- Remove the check of "addr != RT_VM_PM1A_CNT_ADDR" as the handler is specific for this addr.
- Add comments about the meaning of return value.
Tracked-On: #2865
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Intel SDM Vol3 23.8 says:
The INIT signal is blocked whenever a logical processor is in VMX root operation.
It is not blocked in VMX nonroot operation. Instead, INITs cause VM exits
So, there is no side-effect to send INIT signal regardless of pcpu active status.
Tracked-On: #2865
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
'vector_cnt' is vector count of MSI/MSIX, and it come from 'table_count'
in the the pci_msix struct. 'CONFIG_MAX_MSIX_TABLE_NUM' is the maximum
number of MSI-X tables per device, so 'vector_cnt' must be less then
or equal to 'CONFIG_MAX_MSIX_TABLE_NUM'.
Tracked-On: #2881
Signed-off-by: Tianhua Sun <tianhuax.s.sun@intel.com>
Reviewed-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
All if . . else if constructs shall be
terminated with an else statement.
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com
The pt_dev.c in board folder is replaced by the one in scenarios folder,
so remove them.
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
After using get_vm_from_vmid(), vm pointer is always not NULL. But there are still many NULL pointer checks.
This commit replaced the NULL vm pointer check with a validation check which checks the vm status.
In addition, NULL check for pointer returned by get_sos_vm() and get_vm_config() is removed.
Tracked-On: #2520
Signed-off-by: Yan, Like <like.yan@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This commit renmaes guest_no in shell_to_sos_console() to vm_id, which is commonly used in ACRN.
Tracked-On: #2520
Signed-off-by: Yan, Like <like.yan@intel.com>
For hv shell commands with vm_id option, need to check it is in the valid range [0, CONFIG_MAX_VM].
This commit checks the input vm_id, if it's not in the valid range, an error message will be given,
and vm_id will be assgined to default 0U.
Tracked-On: #2520
Signed-off-by: Yan, Like <like.yan@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The CLOS is initialized to 0 for each scenarios. User could modify this
configuration in its vm_configurations.h;
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
In this scenario, hypervisor will run two logical partition VMs.
Please note that the Kconfig of Hypervisor mode will be removed
gradually. In current Kconfig setting, the CONFIG_PARTITION_MODE
is still kept for now for back-compatibility.
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Previously the vm_configs[] is defined separately for sharing mode and
partition mode, but the concept of hypervisor mode will be removed. Instead
we will introduce scenario Kconfig for hypervisor to load different vm
configurations.
SDC(Software Defined Cockpit) is a typical scenario that ACRN supported
so we introduce this scenario for previously sharing mode and move its
configurations to scenarios/sdc folder. The configuration could be used
for all boards reference.
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Use MACROs in pt_dev.c to replace straight-forward BDF numbers. The
pt devices for each VM will be chosen from Board specific PCI devices
list which defined in pci_devices.h;
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add the default handlers for PIO and MMIO access which returns all
FFs on read and discards write. These default handlers are registered
when SOS VM or pre-launched VM is created.
v3 -> v4:
- use single layer if in hv_emulate_pio
- change the implementation of pio_default_read
v2 -> v3:
- use runtime vm type instead of CONFIG_PARTITION_MODE
- revise the pio/mmio emulation functions
- revise the pio/mmio default read functions according to MISRA C
- revise the commit message
v1 -> v2:
- add default handlers members in struct acrn_vm and add interfaces
to register default handlers for PIO and MMIO.
Tracked-On: #2860
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
When RTVM is trying to poweroff by itself, we use INIT to
kick vCPUs off the non-root mode.
For RTVM, only if vm state equal VM_POWERING_OFF, we take action to pause
the vCPUs with INIT signal. Otherwise, we will reject the pause request.
Tracked-On: #2865
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch makes make_reschedule_request support for kicking
off vCPU using INIT.
Tracked-On: #2865
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This API is only for kick vcpu out of non-root mode when
RTVM poweroff by itself. And the first caller will soon come
along with the next patch.
Tracked-On: #2865
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
We set the vm state as VM_POWERING_OFF when RTVM is trying to poweroff by itself.
We will check it when trying to pause vCPUs of RTVM. Only if vm state equal to
VM_POWERING_OFF, we take action to pause the vCPUs of RTVM. Otherwise, we will
reject the pause request.
Tracked-On: #2865
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
The virtual pm port of RTVM is intercepted by HV. But the HV needs to inform the DM as well.
So we will forward the virtual S5 request to DM too
The handler in HV just set the pm state flag (VM_POWERING_OFF) which indicate that the RTVM is powering
off by itself. Meanwhile, there are data resources in VHM and DM should be released once we handle the PM
of RTVM in HV. So, return to DM to go through the entire VM destroy cycles to release the resources.
During the cycles, the DM will try to pause vm through hypercall. In the hypercall handler in HV, we will
check the pm state flag. If it is set, pause all the vCPUs of the vm. Otherwise, reject the request.
In this way, we can make sure that RTVM can only trigger its s5 by itself. All
other S5 request from external will be rejected.
Here is sequence chart of RTVM s5.
poweroff
+-----------+ +----------+ +-----------+ +----------+
| vBSP | | vAPs | | HV | | DM |
+-----+-----+ +----------+ +-----+-----+ +-----+----+
| | | |
| Stop all other cpus | | |
+----------------------------+ | |
| | |Disable LAPIC | |
| +<-+ | |
| | | |
| +--+ | |
| | |HLT in | |
| All other cpus stopped | |non-root mode | |
+----------------------------+ | |
| Call ACPI method to enter s5 | |
+-------------------------+---------------------> | |
| | Set s5 flag | |
| | <---------------------+ |
| | APs paused | Re-inject IOREQ TO DM
| | +-------------------> +-------------------> +
| | | Pause VM |
| | Check S5 flag: | <-------------------+
| | - If set, pause vm | VM paused |
| | - If no, reject | +-----------------> +--+
| | | Destroy VM | |Deinit works
| | | <--------------------<-+
| | | VM destroyed |
| | | +-----------------> |
+ + + +
Tracked-On: #2865
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
This patch makes io_read_fn_t return true or false instead of void.
Returning true means that the handler in HV process the request completely.
Returning false means that we need to re-inject the request to DM after
processing it in HV.
Tracked-On: #2865
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
This patch makes io_write_fn_t return true or false instead of void.
Returning true means that the handler in HV process the request completely.
Returning false means that we need to re-inject the request to DM after
processing it in HV.
Tracked-On: #2865
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch checks if the GUEST_FLAG_RT is set when GUEST_FLAG_LAPIC_PASSTHROUGH is set.
If GUEST_FLAG_RT is not set while GUEST_FLAG_LAPIC_PASSTHROUGH is set, we will refuse
to boot the VM.
Meanwhile, this patch introduces a new API is_rt_vm.
Tracked-On: #2865
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This flag indicates that if the vm is RTVM.
And if a vm has GUEST_FLAG_LAPIC_PASSTHROUGH flag set,
we must set the GUEST_FLAG_RT at the same time.
Tracked-On: #2865
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
In the cases when more than one CPU has something to print, exception
dump from one CPU is overlapped with other CPU's messages and the final
text that is printed on console is all mixed up and does not make any sense.
Changing printf to pr_err so that the messages are printed one after
the other.
Tracked-On: #2858
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
In hypervisor fuzzing test, hypervisor will hang
if issuing HV_VM_SET_MEMORY_REGIONS hypercall after
target VM is destroyed.
this patch is to fix above vulnerability.
Tracked-On: #2849
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
The vm_config in hypervisor restricted VM name size to
MAX_CONFIG_NAME_SIZE (32 bytes). When UOS is launched by DM, the vmname
is passed in as the last optional args, we hope to to copy it to vm_config
in the future. So the size of vmname in DM args should be restricted to
MAX_CONFIG_NAME_SIZE, too. Because MAX_CONFIG_NAME_SIZE will be used by DM,
we move it from vm_config.h to acrn_common.h
We also rename MAX_CONFIG_NAME_SIZE to MAX_VM_OS_NAME_LEN, because it will
be used by another components, should has a clear name.
Tracked-On: #2851
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
devicemodel/include/public/acrn_common.h should be identical with
hypervisor/include/public/acrn_common.h, so we can use a soft link
to hypervisor's acrn_common.h for devicemodel.
Tracked-On: #2851
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Since we always enable "Use TPR shadow", so operate on TPR will not
trigger VM exit. So remove these APIs.
Tracked-On: #1842
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Delete the 2 files and merge their code into vpci.c:
hypervisor/dm/vpci/partition_mode.c
hypervisor/dm/vpci/sharing_mode.c
And change the Makefile accordingly
Change PCI_PRIV_H_ to VPCI_PRIV_H_ in vpci_priv.h
Some misra c fix:
Add @pre for functions
Add const to function parameters
Tracked-On: #2534
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Instead of using CONFIG_PARTITION_MODE at compile time to compile in and call
the partition mode/sharing mode specific functions, always compile in all sharing
mode and partition code, then calling the corresponding functions dynamically based
on vm type (PRE_LAUNCHED_VM and SOS_VM) at runtime.
Some misra c fix:
Add @pre for functions
Add const to function parameters
Add ASSERT in pci_cfgdata_io_read and pci_cfgdata_io_write
Tracked-On: #2534
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Re-organize the code to remove usage of hypervisor.h from
bsp folder, without changing any functionality.
Tracked-On: #2694
Signed-off-by: Arindam Roy <arindam.roy@intel.com>
Currently MSR IA32_MISC_ENABLE is passthrough to guest.
However, guest may change the value of this MSR, which will cause issue in hypervisor.
This patch uses VMX MSR store area to isolate the MSR IA32_MISC_ENABLE between guest and host.
TODO:
Some bits of the MSR IA32_MISC_ENABLE is not just per core, but per package.
So need to check if need to prevent guest from setting or clearing these bits that may affect other cores.
Tracked-On: #2834
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Rename the field msr_num to msr_index, which is more accurate,
in struct msr_store_entry.
Tracked-On: #2834
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
-- move this api from misc.c to timer.c to avoid
reverse dependency, and remove misc.c
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
- for all cases of referring guest bootargs size, replace MEM_2K with
CONFIG_MAX_BOOTARGS_SIZE for better readability.
- remove duplicated MAX_BOOTARGS_SIZE definition from vm_config.h.
Also fix one minor issue in general_sw_loader() which uses copy_to_gpa()
to copy a string. Since copy_to_gpa() makes use of memncpy_s() to do the
job, the size parameter should include the string null ternimator.
Tracked-On: #2806
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Remove the unused seed parsing source files under
hypervisor/boot/sbl and related header files.
Tracked-On: #2724
Signed-off-by: Qi Yadong <yadong.qi@intel.com>
Added a struct acrn_vm in firmware.h to remove
a compiler warning.
No change in logic.
Tracked-On: #2830
Signed-off-by: Arindam Roy <arindam.roy@intel.com>
Enhance the ACRN shell interactive help. It is close to a 1-1 mapping with
the online documentation but cut a little shorter in various places to make it
more user-friendly when using it from the ACRN console.
Tracked-On: #2829
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
To merge the multiboot bootargs within sbl_init_vm_boot_info(), buffer
overflow could happen when it doesn't provide correct 'dmax' argument
to strncpy_s().
Also, currently it doesn't check the availability of the dest buffer before
overwriting '\0' with a whitespace, which theoretically the dest string
could end up with no null terminator within it's array boundary.
This patch also creates a separate function to merge the cmdline strings,
because after the above fixes some lines in sbl_init_vm_boot_info()
function could have up to 7 tabs in front of the first character, which
looks messy and sbl_init_vm_boot_info() is getting too complicated.
Tracked-On: #2806
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Linux access TSC_ADJUST to verify it has not tampered every time when enter idle.
So for RTVM running rt-linux, the access will cause vm exit which affect real-time performance.
This commit pass through TSC_ADJUST to VM with lapic_pt, to avoid TSC_ADJUST caused vm_exit.
For other VMs, TSC_ADJUST msr access is still trapped and emulated.
Tracked-On: #2813
Signed-off-by: Yan, Like <like.yan@intel.com>
This patch hide Memory Protection Extention (MPX) capability from guest.
- vCPUID change:
Clear cpuid.07H.0.ebx[14]
Clear cpuid.0DH.0.eax[4:3]
- vMSR change:
Add MSR_IA32_BNDCFGS to un-supported MSR array.
- XCR0[4:3] is not allowed to set by guest.
Tracked-On: #2821
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Both sharing mode and partition mode should follow the same coding logic/style
for similar functions:
vdev cfgread/cfgwrite: should all return -ENODEV if the pci reg access is not handled by
it, but previously the partition mode code is not following this logic
vpci cfgread/cfgwrite: if the vdev cfgread/cfgwrite does not handle this reg,
pass on to next vdev cfgread/cfgwrite, if no vdev handles that req, passthru to
physical pci device
Tracked-On: #2534
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Do the pci cfg read/write sanity checking before the request is dispatched to
submodules, so that the checking is centralized rather than scattered across multiple
files/places
Tracked-On: #2534
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
In preparation for vpci ops function removal, so that these functions can be
called directly instead by vpci code
Tracked-On: #2534
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Remove vdev ops for partition mode, change related code to directly call the corresponding
functions instead
Remove struct pci_vdev_ops from vpci.h
Add @pre for pci_find_vdev_by_pbdf and pci_find_vdev_by_vbdf/partition_mode_vpci_init
Change the return value from int32_t to void to comply with misra c and
add ASSERT/panic in the functions (if necessary):
vdev_hostbridge_init
vdev_hostbridge_deinit
vdev_pt_init
vdev_pt_deinit
Still use pr_err in partition_mode_cfgread and partition_mode_cfgwrite to check if vdev cfgread/cfgwrite
access is aligned on 1/2/4 bytes, which is the only case that vdev cfgread/cfgwrite will return
nonzero, pr_err will be removed in subsequent patch titled "unify the sharing
mode and partition mode coding style for similar functions"
Remove @pre for local variables
Add ASSERT in partition_mode_pdev_init to check if pdev is NULL (user config
error)
Tracked-On: #2534
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
ACRN uses global invalidation for all DMAR translation caches. Whenever
a UOS is shutdown or rebooted, it ends up clearing entries in translation
caches belonging to other VMs/domains. This patch adds support for
domain/device level invalidation for DMA translation caches and index
based invalidation for Interrupt Remapping Cache.
Tracked-On: #2738
Signed-off-by: Sainath Grandhi sainath.grandhi@intel.com
Acked-by: Eddie Dong eddie.dong@intel.com
strncpy_s(d, dmax, s, slen): the 'dmax' includes the null terminator, while
slen doesn't. Thus if (dmax == slen == strlen(s)), strncpy_s() chooses to
discard the last character from s and instead write '\0' to d[dmax - 1].
strnlen_s(s, maxsize): if there is no terminating null character in the
first maxsize characters pointed to by s, strnlen_s() returns maxsize.
So in the following example or similar cases, we need to increase the size
of d[] by 1 to accommodate the null terminator, and add '1' to the dmax
argument to strncpy_s().
uint8_t d[MAX_LEN];
size = strnlen_s(s, MAX_LEN);
strncpy_s(d, MAX_LEN, s, size);
Tracked-On: #861
Signed-off-by: Zide Chen <zide.chen@intel.com>
Currently board names are used inconsistently across the project.
* Name of defconfigs for various boards use lowercase.
* Directory of config files for various boards use lowercase.
* CONFIG_BOARD uses uppercase.
This confuses the configuration scripts and leads to unintended overwriting of
.config, as well as missing of board-specific headers during compilation because
the include paths are case-sensitive.
This patch converts the default board names to lowercase to resolve such
issues. Users are still free to define their own boards in either uppercase or
lowercase as long as they keep the cases consistent.
Tracked-On: #2794
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Preparing for hybrid mode:
- create vE820 for pre-launched VMs and do other init code when the
vm_config->type is PRE_LAUNCHED_VM.
- create ve820.c for each board because without wrapping by
CONFIG_PARTITION_MODE, ve820_entry[] needs to be visible even when
compiling target boards that haven't enabled pre-launched VMs.
- remove create_prelaunched_vm_e820() from vm.c and implement board
specific function for each $(CONFIG_BOARD)/ve820.c. The reasons being:
- don't need to define ve820_entry[32] for those boards that don't
support pre-launched VMs.
- more importantly, this makes it much easier to create different per-VM
vE820 when it's needed.
Tracked-On: #2291
Signed-off-by: Zide Chen <zide.chen@intel.com>
Previously vrtc is for partition mode only, now enable it for sharing mode;
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Suppose run_ctx.cr0/cr4 are correct when do world switching, so call
vcpu_set_cr0/cr4() to update cr0/cr4 directly before resume to guest.
This design is only for trusty world switching.
Tracked-On: #2773
Signed-off-by: Qi Yadong <yadong.qi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Remove vdev ops for sharing mode, directly call the corresponding functions
instead of calling the ops callbacks (indirectly)
Remove alloc_pci_vdev() and merge its code into init_vdev_for_pdev() to simplify code
Remove @pre for local variables
Change the return value from int32_t to void to comply with misra c and
add ASSERT in the functions (if necessary) to verify the assumptions for debug build:
vmsi_init
vmsix_init
vmsi_deinit
vmsix_deinit
Add @pre for vmsix_init_helper and make it a void function, use ASSERT to verify
the assumption for debug build.
Add ASSERT in get_sos_vm
Tracked-On: #2534
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This is to fix the following misra c violation:
Pointer param should be declared pointer to const. : vdev
Tracked-On: #2534
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
No need to use these 2 variables as global (per pci_misx), can simply use local
variables in code instead.
Tracked-On: #2534
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Define has_msi_cap and has_msix_cap inline functions to do sanity checking for
msi and msix ops, the corresponding code block in existing code is replaced with
a call to these new functions.
A few minor coding style fix.
Tracked-On: #2534
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Now we only configure "hide MTRR" explicitly to false for SOS. For other VMs,
we don't configure it which means hide_mtrr is false by default.
And remove global config MTRR_ENABLED
Tracked-On: #1842
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
When a pci device assined to UOS, the virtual bdf is allocated by device model.
After the pci device un-assigned from UOS, it is back to SOS.
The virtual bdf should be restored.
The virtual bdf equals physical bdf for a pci device in SOS.
Tracked-On: #2788
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
VM use CLOS when set CLOS_REQUIRED in guest flags of vm_config. The
wrong comment is 'if guest_flags has CAT_ENABLED', and should be fixed
as 'if guest_flags has CLOS_REQUIRED'
Tracked-On: #2462
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
1. move seed_info structure from trusty.h to seed.h
2. replace "#include <hypervisor.h>" with necessary including headers
in seed.c/seed_abl.c/seed_sbl.c
Tracked-On: #2777
Signed-off-by: Qi Yadong <yadong.qi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Remove vmx_cr0/vmx_cr4 from ext_context structure, they are duplicated
with cr0/cr4 fields in run_context.
Switch cr0/cr4 of run_context structure on demand when do world switch.
Remove vmx_cr0_read_shadow/vmx_cr4_read_shadow from ext_context structure.
These fields should be same for both normal world and secure world.
Tracked-On: #2773
Signed-off-by: Qi Yadong <yadong.qi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The init page tables installed in either cpu_primary.S or trampoline.S
are 1:1 mapping and won't be changed in the future.
The 'actual' hypervisor page table installed in enable_paging() is 1:1
mapping currently but it could be changed in the future. Both hva2hpa() and
hpa2hva() are implemented based on these page tables and can't be used
when the init page tables take effect.
This patch does the following cleanup:
- remove all hva2hpa()/hpa2hva() before calling enable_paging()
- get_hv_image_base() returns HVA, not HPA. So add hva2hpa() for all cases
that are called afte enable_paging().
Tracked-On: #2700
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <Eddie.dong@intel.com>
Fix some stray UTF-8 punctuation and symbol characters, unnecessary
trademark symbols, and some misspellings missed during regular reviews.
Tracked-On: #2712
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Input parameter "bus" of assign_iommu_device/unassign_iommu_device may be from hypercall.
And the conext tables are static allocated according to CONFIG_IOMMU_BUS_NUM.
Need to check the bus value to avoid access invalid memory address with invalid value.
Tracked-On: #2743
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Export the following functions as global instead of static so that they can be
called/referred outside of the files where they are declared:
vdev_pt_init
vdev_pt_deinit
vdev_pt_cfgread
vdev_pt_cfgwrite
vdev_hostbridge_init
vdev_hostbridge_deinit
vdev_hostbridge_cfgread
vdev_hostbridge_cfgwrite
This is in preparation for removal of the partition modes vdev ops, and call them
directly instead.
Tracked-On: #2534
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Export the following functions as global instead of static so that they can be
called/referred outside of the files where they are declared:
vmsi_init
vmsi_cfgread
vmsi_cfgwrite
vmsi_deinit
vmsix_init
vmsix_cfgread
vmsix_cfgwrite
vmsix_deinit
This is in preparation for removal of the sharing modes vdev ops, and call them
directly instead.
Tracked-On: #2534
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Remove the populate_msi_struct() function, put msi initialization specific
functionality into msi.x, and put msix initialization specific functionality
into msix.c
Rename mmio_hva to mmio_hpa and change related code to fix misra c violation:
Cast from pointer to integral type. : (void* to unsigned long): ( uint64_t ) hpa2hva ( bar -> base )
Tracked-On: #2534
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
In order to remove the usage of hypervisor.h,
modularize the boot folder.
Current changes include modifications to remove
usage of acrn_vm structure pointer, from some of
the call, and remove calls to hypervisor.h,
as and when deemed fit.
Removed hva2gpa, as this was not used anywhere else
after the changes.
Tracked-On: #2694
Signed-off-by: Arindam Roy <arindam.roy@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
move instr_emul_ctxt instance from struct per_cpu_region
to struct vcpu, and rename it from g_inst_ctxt to inst_ctxt
Tracked-On: #1842
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
now the 'cpu_mode' is unused in struct vm_guest_paging,
and there is the same variable in struct acrn_vcpu_arch
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
ACRN now has unified the way to handle SBL and UEFI.
so just remove corresponding macros in Kconfig.
BTW, default configuration in Kconfig is for UEFI boards.
Tracked-On: #2708
Signed-off-by: Tw <wei.tan@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch mainly unifies init_vm_boot_info's implementation between SBL and
UEFI.
Tracked-On: #2708
Signed-off-by: Tw <wei.tan@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch unifies the bsp interface between UEFI and SBL.
Tracked-On: #2708
Signed-off-by: Tw <wei.tan@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
detect_apicv_cap should used to detect all the APICv capabilities. Besides,
"Virtualize x2APIC mode" doesn't depend on "APIC-register virtualization".
We shouldn't check "Virtualize x2APIC mode" support only when physical platform
supports "APIC-register virtualization"
Tracked-On: #1842
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Add two functions to combine constraint for APICv:
is_apicv_basic_feature_supported: check the physical platform whether support
"Use TPR shadow", "Virtualize APIC accesses" and "Virtualize x2APIC mode"
is_apicv_advanced_feature_supported: check the physical platform whether support
"APIC-register virtualization", "Virtual-interrupt delivery" and
"Process posted interrupts".
If the physical platform only support APICv basic feature, enable "Use TPR shadow"
and "Virtualize APIC accesses" for xAPIC mode; enable "Use TPR shadow" and
"Virtualize x2APIC mode" for x2APIC. Otherwise, if the physical platform support
APICv advanced feature, enable APICv feature for xAPIC mode and x2APIC mode.
Tracked-On: #1842
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Accessing memory of guest will cause page fault when SMAP is enabled.
This patch stac()/clac() correspondingly to get rid of this situation.
Tracked-On: #2713
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Assert that PCI devices discovered while booting the hypervisor do not
have more table entries than allowed by the compile-time configuration
(CONFIG_MAX_MSIX_TABLE_NUM).
The case were `msix.table_count` > `CONFIG_MAX_MSIX_TABLE_NUM` is fatal
since the init function in the handler for MSI-X (vmsix_init) only looks
at `table_count` when populating the table. Since
`CONFIG_MAX_MSIX_TABLE_NUM` is the max size of the table array entry in
the pci_msix struct. This will cause the msix handler to write outside of
the table array.
Tracked-On: #2624
Signed-off-by: Viktor Sjölind <vsjolind@luxoft.com>
Except for few translation structures in x86 IOMMU, all translation
structures are 128-bit. All the translation structures used by ACRN
are 128 bit. So removed multiple definitions and defined a struct
that accomodates 128 bit entries.
Tracked-On: #2668
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
In partition mode, unassign_iommu_device() is called from vpci_cleanup(),
so when shutdown_vm() is called, unassign_iommu_device() could fail because
of "domain id mismatch" and DMAR is not cleared.
Also move destroy_ept() after the call to destroy_iommu_domain().
Tracked-On: #2700
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Previous change 'HV: modularization vm config code', commit id
1bb15c64a6, lost CAT code when move
sanitize_vm_config() from vm.c to vm_config.c
Tracked-On: #2291
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
platform_acpi_info.h should be BOARD specific so move the header file
to configs/$(CONFIG_BOARD)/ folder.
So the target acpi info file detect process is:
Compiler search for $(CONFIG_BOARD)_acpi_info.h under
hypervisor/arch/x86/$(CONFIG_BOARD)/ first (the file is supposed to be
generated by offline tool so it is not included in original source), if
found, then the file is the target acpi info file. If not and at the
same time the ENFORCE_VALIDATED_ACPI_INFO Kconfig was set, the compiler
will stop and hint user to add target acpi info file by offline tool.
If ENFORCE_VALIDATED_ACPI_INFO was unset, then compiler will continue to
search for platform_acpi_info.h as target acpi info file under
hypervisor/arch/x86/$(CONFIG_BOARD) folder (with this file we could bypass
ENFORCE_VALIDATED_ACPI_INFO check and benifit for development). If this
file is not exist, then hypervisor/arch/x86/configs/platform_acpi_info.h
will be included as final target acpi info.
The process should work for UEFI path also, with a valid platform acpi
info file, S3/S5 should work on UEFI platform.
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
-- change 'tsc_khz' to static
-- move these APIs from rtl.h to timer.c
us_to_ticks()
ticks_to_us()
ticks_to_ms()
rdtsc()
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
to validate the ID and state of vCPU in below functions:
- hcall_set_vcpu_regs()
- hcall_notify_ioreq_finish()
- shell_vcpu_dumpreq()
Tracked-On: #861
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
change the config type of COM_IRQ from "hex" to "int"; make
it consistent with its default value.
Tracked-On: #2689
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Reviewed-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
This commit extracts the common logic of vlapic_calc_dest() and vlapic_calc_dest_lapic_pt()
to static inline functions, in order to make vlapic_calc_dest() clean and easy to read.
Tracked-On: #1842
Signed-off-by: Yan, Like <like.yan@intel.com>
We could simple the vector check for LVT IRQ by move this check to
vlapic_fire_lvt when the IRQ is fixed mode.
Tracked-On: #1842
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Set when the local APIC detects an illegal vector (one in the range 0 to 15)
in the message that it is sending. This occurs as the result of a write to the
ICR (in both xAPIC and x2APIC modes) or to SELF IPI register (x2APIC mode only)
with an illegal vector.
Tracked-On: #1842
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
LVT ERROR is an edge and fixed mode interrupt. We could call vlapic_accept_intr
to fire it directly. Otherwise, if LVT ERR vector is invalid, an invalid
interrupt will be accepted in IRR.
Tracked-On: #1842
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Currently for pre-launched VMs, HV intends to do EPT mapping for all GPA
space, which implies that it wastes HPA to back PCI hole and other vE820
entries that are not backed by physical memory.
This patch solves this issue and fixes ve820 entries whose length is not
aligned to 4K, and changes the lowmem entry's start GPA from 1MB to 2MB.
Tracked-On: #2587
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
This patch simplifies `get_primary_vcpu` and `vcpu_from_vid`.
The target_vcpu could be get from the index directly.
Tracked-On: #1842
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Correct wrong use of vector where lvt_index should be used.
Tracked-On: #1842
Signed-off-by: Min He <min.he@intel.com>
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
ECS.bit31 is not used and always return 0 in SDM Vol.2A 3-195. It's a
standard way to indicate whether there is a hypervisor.
Tracked-On: #2490
Ref: https://lwn.net/Articles/301888/
Signed-off-by: Xinyun Liu <xinyun.liu@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
vcpu returned by get_primary_vcpu API is BSP vcpu of the VM. So
checking is_vcpu_bsp on vcpu is redundant.
Tracked-On: #2668
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
get_dmar_info API is called from multiple functions in vtd.c. This patch
calls get_dmar_info once during init and uses the cached info during
runtime.
Tracked-On: #2657
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
move 'init_iommu()' & 'ptdev_init()' before starting
all secondary cores to avoid access uninitialized resource
in partition mode.
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Both sharing mode and parittioin mode code can use the pci_find_vdev_by_pbdf
and pci_find_vdev_by_vbdf functions defined in vdev.c instead,
and remove the corresponding functions in other files.
Tracked-On: #2534
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add vdev functions so they can be reused by both partition mode
and sharing mode code:
pci_find_vdev_by_vbdf: search for vdev by virtual bdf
pci_find_vdev_by_pbdf: search for vdev by physical bdf
Tracked-On: #2534
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
core.c contains functions all related to pci vdev management, so it makes sense
to give it a more meaningful file name.
Tracked-On: #2534
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Sharing mode has its own static global variables to store
number of vdevs and vdev list, we already have the per vpci pci_vdev[]
in struct acrn_vpci, so use the vpci_vdev in acrn_vpci instead to unify
the vdev list management for both sharing mode and partition mode.
Tracked-On: #2534
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
pci_vdevs is vpci stuff so it would be better to make it managed by vpci rather than by vm.h,
both sharing mode and partition mode can use pci_vdevs[] to maintain its own
per vm vdev list.
Tracked-On: #2534
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- merge sharing_config.c and partition_config.c to vm_config.c;
- make vm_configs[] static;
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- Do not refer vm_configs[] directly in vm module;
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- move sanitize_vm_config() from vm.c to vm_config.c;
- move get_vm_config() from vm.h to vm_config.h;
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Enlarge hypervisor BSS section to support EPT mapping of additional
1G address space. This is used to support 64bit PCI bar whose address
is strictly above 4G.
Tracked-On: #2577
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Yu Wang <yu1.wang@intel.com>
Reviewed-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
it removes hypervisor.h and just includes needed header files.
Tracked-On: #1842
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
it removes hypervisor.h and just includes needed header files.
Tracked-On: #1842
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
When CAT is supported, UOS can setup acrn_vm_config.clos, to use CAT
feature. Eg.,
struct acrn_vm_config vm_configs[CONFIG_MAX_VM_NUM] = {
{
.guest_flags |= CLOS_REQUIRED,
.clos = 1,
},
};
sanitize_vm_config() will check if CAT is supported and
vm_configs.clos is valid.
Tracked-On: #2462
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Enumarate capability of Cache Allocation Technology(CAT) on X86 platform,
when HV init the primary cpu. If CAT is supported, store its info
to global struct cat_hw_info.
Tracked-On: #2462
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
IF CAT is supported, and we want setup initial values to
IA32_Type_MASK_n MSRs, We can define a global structure
platform_clos_array[PLATFORM_CLOS_NUM], it has 2 members:
1.msr_index, the MSR address of IA32_Type_MASK_n
2.clos_masky, the initial valuses
Global varible platform_clos_num is the number of IA32_Type_MASK_n,
from IA32_Type_MASK_0 to IA32_Type_MASK_<CLOS_MAX_NUM - 1>
Tracked-On: #2462
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
1) The previous implementaion will recalculate the whole EOI-exit bitmap for
each RTE once the destination, trigger mode, delivery mode or vector of a RTE
has changed and update the EOI-exit bitmap for each vcpu of the VM.
In this patch, only set the corresponding bit of EOI-exit bitmap for
a vcpu when a level triggered interrupt has accepted in IRR or clear the
corresponding bit of EOI-exit bitmap for a vcpu when a dege triggered interrupt
has accepted in IRR which means only update a bit of EOI-exit bitmap in a vcpu
when updating TMR.
2) Rename set eoi_exit related API to set eoi_exit_bitmap.
Tracked-On: #1842
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
--move several uart API declarations from console.h to uart16550.h
--move several shell API declarations from console.h to shell.h
--add dbg_cmd.h, move 'handle_dbg_cmd' declaration from console.h
to dbg_cmd.h
--move debug/uart16550.h to include/debug/uart16550.h since some
uart APIs will be called by external files
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
modified: arch/x86/guest/vm.c
modified: arch/x86/init.c
modified: bsp/uefi/cmdline.c
modified: debug/console.c
modified: debug/dbg_cmd.c
modified: debug/uart16550.c
modified: debug/vuart.c
modified: hw/pci.c
modified: include/arch/x86/multiboot.h
modified: include/debug/console.h
new file: include/debug/dbg_cmd.h
new file: include/debug/shell.h
renamed: debug/uart16550.h -> include/debug/uart16550.h
In terms of parsing multboot info, the differences between pre-launched VM
and SOS are minor:
- pre-launched VMs don't take bootargs from multiboot info.
- The kernel_load_addr is different between pre-launched VMs and SOS.
This patch removes the partition mode specific init_vm_boot_info(), and
handle SOS and pre-launched VMs differently in one single init_vm_boot_info().
Also, this makes ramdisk available for pre-launched VMs.
Tracked-On: #2587
Signed-off-by: Zide Chen <zide.chen@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
bootargs_load_addr (GPA) and zero page which locates at one page follows it:
- SOS: currently it's fixed at 0x24EFC000. Theoretically, this address may
not exist if the system has small memory size.
- pre-launched VMs: currently it's at (vm_config->memory.size - 8KB).
It doesn't work if the guest has been assigned for more than 4GB memory
size, because zero page must be under 4GB.
- This patch reserves 8KB for bootargs_load_addr right before kernel_load_addr
for either SOS or pre-launched VMs.
ramdisk_load_addr (GPA):
- pre-launched VMs: currently it doesn't allow ramdisk.
- SOS: currently it's assigned at mods[].mm_mod_start. It's a bug because it
misses the hpa2gpa() conversion.
- This patch puts ramdisk_load_addr right after (kernel_load_addr + kernel_size),
which has 2 benefits:
- for pre-launched VMs, mods[].mm_mod_start may be out of its GPA range.
- it may be better to consolidate everything (bootarg, kernel, ramdisk) in
consecutive GPA, other than spread them out in different places.
Tracked-On: #2587
Signed-off-by: Zide Chen <zide.chen@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Reviewed-by: Victor Sun <victor.sun@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Due to ABL design change, it will reword the "dev_sec_info.param_addr="
to "ABL.svnseed" in command line.
Tracked-On: #2611
Signed-off-by: Qi Yadong <yadong.qi@intel.com>
Acked-by: Zhu Bing <bing.zhu@intel.com>
remove vpci_vdev_array in vm_config struct as it is not used any more;
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add sos_vm.h as a template in configs folder and is linked to
configs/$(CONFIG_BOARD)/sos_vm.h.
If customer need a board specific sos_vm.h, make a copy in
configs/$(CONFIG_BOARD)/ and replace the symbol link.
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The Kconfig file of UP2 board was named as up2.config, rename to apl-up2.config
to make it consistent with naming of apl-mrb/kbl-nuc ...
The name change is also applied in Makefile to make sure compile success.
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
There are still some misra-c violations when CONFIG_PARTITION_MODE is defined.
arch/x86/configs:
- remove the unused macro: PRE_LAUNCH_VM_NUM
- pt_dev.c: VMx_CONFIG_PCI_PTDEV_NUM has been defined in partition_config.h,
should not hard code them again in pt_dev.c.
- ve820.c: use "UL" suffix instead of "U" for 64 bits variables.
vmid is uint16_t in ACRN, so vuart_vmid should be uint16_t as well.
Fix another few other miscellaneous misra-c violations.
Tracked-On: #861
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This issue is triggered when launch fuzzing test.
Fuzzing test thread will call destroy_vm(IC_DESTROY_VM)
to set the guest vCPU state to VCPU_ZOMBIE then VCPU_INIT
and then VCPU_OFFLINE, it will cause post-work can't resume
the guest vCPU and can't changes the state of the
corresponding I/O request slot to REQ_STATE_FREE.
so replace improper use of ASSERT with return error code.
Tracked-On: #2606
Signed-off-by: Tianhua Sun <tianhuax.s.sun@intel.com>
Reviewed-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Rename vlapic_post_intr to apicv_post_intr and move it to internal function
since it's only used in vlaic.c.
Tracked-On: #1842
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Since it's only used in vlaic.c
Tracked-On: #1842
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Move vm_active_cpus from vlapic.c to vm.h since it's vm related
not vlapic related.
Tracked-On: #1842
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
pci_vdev contains a pointer to pdev, which stores pbdf, so there is no need
to store a separate pbdf in vdev.
Tracked-On: #2534
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Use a function to compare bdf instead and some related code cleanup
Tracked-On: #2534
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
For 64-bit bars, previously the code will do bar size calculation only if the
lower 32-bit bar address is nonzero, changed to do bar size calculation when the whole
64-bit bar address is nonzero.
Tracked-On: #2534
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Otherwise, page fault will be triggered when writing npk log
to these mmio addresses.
Tracked-On: #2589
Signed-off-by: Zhi Jin <zhi.jin@intel.com>
Reviewed-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
merge E820_MAX_ENTRIES and NUM_E820_ENTRIES
to E820_MAX_ENTRIES.
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
PDPTE registers should be loaded in PAE paging mode.
However, current code load PDPTE registers in long mode.
Tracked-On: #2561
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
There are two bugs related to PDPT address calculation for PAE mode.
1. Current code doesn't ignore the "Ignored" fileds when load pdpt registers.
Mask the "Ignored" fileds according to SDM Figure 4-7 Vol3.
2. Current code only ignores 4bits instead of 5bits in low "Ignored" filed when
calculate PDPT address in PAE mode for guest memory address translation.
Tracked-On: #2561
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
We need to parse dmar table on UP2+SBL, otherwise all
the interrupts from IOAPIC don't work.
Tracked-On: #2572
Signed-off-by: Tw <wei.tan@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
remove hypervisor.h from per_cpu.h
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
merge include/arch/x86/irq.h and include/common/irq.h
--> include/arch/x86/irq.h
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
move gva2hva() & hva2gpa() to guest_memory.c,
we will remove hypervisor.h in the future.
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
According to SDM 17.3.1.1, for any fault-class exception except a
debug exception generated in response to an instruction breakpoint,
the value pushed for RF is 1.
This patch set Resume Flag for fault class exceptions.
Tracked-On: #2405
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
DCR is initialized to 0 which means divisor shift is 1. Currently, both
are initialized to 0 which result in incorrect APIC timer counts if the
vLAPIC's DCR is never programmed.
This bug was exposed by OVMF because OVMF does not program DCR during
LAPIC initialization.
Tracked-On: #2543
Signed-off-by: Peter Fang <peter.fang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
HV passes the return value of vmcall by register RAX unconditionally.
However, if the vmcall is undefined for a guest, RAX value of guest vcpu
should not be changed.
According to SDM Vol. 3C 30-9, VMCALL is allowed from any CPL in guest.
VMCALL is NOT allowed from CPL > 0 in vmx root mode.
ACRN hypervisor doesn't call VMCALL in vmx root mode, though.
In current code, ACRN also deny VMCALL from CPL > 0 in guest.
So for this case, #GP will not be injected, instead, modify the RAX to
notify the return value.
Tracked-On: #2405
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
ACRN HV hide VMX capability from guest. Only vmcall from SOS or some
specific vmcall from UOS are allowed.
Unsupported vmcall from UOS should be considered a "not in VMX operation" case,
and should be handled first according to SDM Vol. 3C 30-9.
Tracked-On: #2405
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Removed the remaining reference of acrn vm from
inside of vtd.c.
Removed usage of snoopy_mem, and added code to achieve
the same using iommu_snoop.
Initialize iommu_snoop to true in create deault iommu.
Tracked-On: #2496
Signed-off-by: Arindam Roy <arindam.roy@intel.com>
This patch is a modified one. It removes the usage
of acrn_vm struct from inside vtd.c.
It also puts struct iommu_domain inside vtd.h,
from vtd.c.
It modifies the signature of init_iommu_domain
in order to remove dependency on acrn_vm from
inside vtd.c.
Incorporated comments from Jason and Eddie.
Changed the name of sos_vm_domain to
fallback_iommu_domain
Removed any reference of sos_vm from vtd.[c|h]
files, including comments.
Tracked-On: #2496
Signed-off-by: Arindam Roy <arindam.roy@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
For vcpu.c and vcpu.h,only include some necessary
header files, doesn't include hypervisor.h
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
-- now hypervisor.h is the universal set of header file,
this patch doesn't include hypervisor.h, only include
some necessary header files for vm.c and vm.h
-- move 'struct vcpuid_entry' from vm.h to vcpuid.h
-- remove dead code 'enum vm_privilege_level'
-- move 'enum vpic_wire_mode' from vm.h to vpic.h
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- move functions related vmexit from `guest.h` to `vmexit.h`
- move functions related msr from `guest.h` to `msr.h`
- move functions related vm_sw_loader from `guest.h` to `vm.h`
- move function `vmx_vmrun` from `guest.h` to `vcpu.h`
- move MACROs related to vcpu from `guest.h` to `vcpu.h`
- move MACRO `E820_MAX_ENTRIES` from `guest.h` to `e820.h`
- move MACROs related to irq from `guest.h` to `irq.h`
- rename `guest.h` to `guest_memory.h`
Tracked-On: #2503
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Use acrn_vm_pci_ptdev_config struct for PCI PT devices configuration
in acrn_vm_config, the only needed configure item is PT devices's
vBDF and pBDF info. When init PT devices, the BDF info will be stored
in pci_vdevs[] of acrn_vm.
With this patch, the previous vpci_vdev_array struct is not needed.
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Remove redundancy code since they are not used now.
-- remove 'max_ram_blk_base' & 'max_ram_blk_size' in
struct e820_mem_params
-- remove 'gpa_lowtop' in struct vm_hw_info
-- remove MACRO 'UOS_DEFAULT_START_ADDR'
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The partition mode vm config in vm_description.c is abandoned,
so delete the file. Its related struct in vm.h is also removed;
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The previous VM configs array for partition mode is inside struct of
vm_config_partition and named as vm_config_array[], now switch to
global vm_configs[];
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add VM configure files for Intel apl-mrb and dnv-cb2 platforms.
The board specific config header is named as partition_config.h and
the PCI passthrough device list is named as pt_dev.c under
hypervisor/arch/x86/configs/$CONFIG_BOARD folder.
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
As we store the physical pci device info in a global pdev array, the vdev struct can
store a pointer to pdev instead.
Tracked-On: #2431
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Reviewed-by: Anthony Xu <anthony.xu@intel.com>
The ptdev ops will be initialized automatically during ptdev init, so
remove the hardcoded ops in vm_description.c
Tracked-On: #2431
Signed-off-by: Victor Sun <victor.sun@intel.com>
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Reviewed-by: Anthony Xu <anthony.xu@intel.com>
We have enabled bar decoding in init ptdev, so hard-coded bar info is not needed
any more.
Tracked-On: #2431
Signed-off-by: Victor Sun <victor.sun@intel.com>
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Reviewed-by: Anthony Xu <anthony.xu@intel.com>
Current pt devices bar info for partion mode is hardcoded in
vm_description.c, now we remove the hardcoded info and parse the bar
info during pt devices init.
Tracked-On: #2431
Signed-off-by: Victor Sun <victor.sun@intel.com>
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Reviewed-by: Anthony Xu <anthony.xu@intel.com>
Tracked-On: #2431
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Anthony Xu <anthony.xu@intel.com>
- add e820 info in struct acrn_vm;
- rename rebuild_sos_vm_e820() to create_sos_vm_e820();
- add create_prelaunched_vm_e820() for partition mode;
- rename create_e820_table() to create_zeropage_e820() and merge for
both sharing mode and partition mode;
- move create_xxx_vm_e820() to vm.c;
- move create_zeropage_e820() to vm_load.c;
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
move e820_default_entries[] from vm_description.c to ve820.c and rename
to ve820_entry[] as a temparary solution for partiton mode e820 management;
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Rename vlapic_deliver_intr to vlapic_receive_intr: ioapic/msi device
deliver an interrupt to lapic.
Rename vlapic_pending_intr to vlapic_find_deliverable_intr: find a
deliverable interrupt which pending in irr and its priority large than ppr.
Rename vlapic_intr_accepted to vlapic_get_deliverable_intr: get the deliverable
interrupt from irr and set it in isr (which also raise ppr update)
Tracked-On: #1842
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
CRx 'guest/host mask' is widely used when talking
about CR0/CR4 virtualization in SDM spec,
rename them to 'VMX_CRx_GUEST_HOST_MASK'.
Tracked-On: #861
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- move `vcpumask2pcpumask` from `guest.c` to `vcpu.c`
- move `prepare_sos_vm_memmap` from `guest.c` to `vm.c`
- rename `guest.c` to `guest_memory.c`
Tracked-On: #2484
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch adds IR enable/disable APIs. Upon boot, enabling IR is
deferred until the first interrupt source is programmed. This is done
for UEFI platforms as UEFI bootloader depends on timer interrupt and
the programming of timer interrupt source is done before ACRN gets a
chance to run during boot.
Tracked-On: #2426
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
When a corresponding IOMMU is found for the device, this patch adds
support to program Interrupt Remapping hardware RTEs and the original
interrupt sources (MSI or IOAPIC) with IR format.
Tracked-On: #2426
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
Interrupt Remapping hardware in x86 can hold 64K entries with each entry
of size 16 bytes. So 256 entries occupy 4K. Adding a configuration for
developer to choose number of IR entries, in multiples of 256. ACRN does
not boot on platforms that does not support Interrupt Remapping and
Extended Interrupt Mode
Tracked-On: #2426
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
IOAPIC info from DMAR table is needed to match the IOAPIC info from
MADT. This patch adds support to get id and bus, devfn for IOAPIC
from DMAR. IOAPIC info for SBL platform is hardcoded in the header
file.
Tracked-On: #2426
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
IOAPIC info, specifically ID, is needed to map the IOAPIC to
corresponding DMAR. DMAR table in ACPI has a field that has IOAPIC
ID, that matches the info provided in MADT. Both (IOAPIC info from
MADT and from DMAR) is needed for remapping IOAPIC interrupts.
Tracked-On: #2426
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
As we enable Interrupt Remapping Hardware in ACRN, Queued Invalidation
(QI) needs to be used clear DMAR hardware caches. This patch introduces
Queued Invalidation APIs. Code related to Register based Invalidation
is removed from ACRN and platforms that do not support QI cannot boot
with ACRN after this patch.
Tracked-On: #2426
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
The msr load/restore during vmexit/vmentry is enabled in HV by
default. The profiling has assumption that it's only user for this
feature, which could overwrite of HV default setting.
This fix combine the msr load list for vmexit when profiling.
Tracked-On: #2422
Signed-off-by: Min Lim <min.yeol.lim@intel.com>
Since the profiling utilizes the limited size of buffer to capture
sample data, dropping samples could happen while collecting data
if data is generated faster than flushing by consumer. Capturing
the dropped sample info is critical to understand how much the data
is reliable to use.
To capture the information, the new hypercall "PROFILING_GET_STATUS"
is introduced.
Tracked-On: #2474
Signed-off-by: Manisha Chinthapally <manisha.chinthapally@intel.com>
Signed-off-by: Min Lim <min.yeol.lim@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
According to SDM 24.7.2, these two MSRs should be
configured with physical address.
Tracked-On: #861
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
With lapic_pt based on vlapic, guest always see vitual apic_id.
We need to convert the virtual apic_id from guest to physical apic_id
before writing ICR.
SMP for VM with lapic_pt is supported with this fix.
Tracked-On: #2351
Signed-off-by: Yan, Like <like.yan@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Use smp_call_function() to read/write MSR register on target PCPU
Tracked-On: #2462
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add this magic number to prevent potential overflow when dumping
host stack.
Tracked-On: #2455
Signed-off-by: Tw <wei.tan@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
As scheduler uses its own stack for now,
there is no need to check stack validity,
so wipe it out.
Tracked-On: #2455
Signed-off-by: Tw <wei.tan@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
ASSERT could be used in some situations, such as, there are some pre-assumption
for some code, using ASSERT here for debug. It could not be used for detect error
when system booting where panic should be used.
Tracked-On: #861
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
ASSERT could be used in some situations, such as, there are some pre-assumption
for some code, using ASSERT here for debug. It could not be used for detect error
when system booting where panic should be used.
Tracked-On: #861
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@inte.com>
Panic should only be used when system booting. Once the system boot done,
it could never be used. While ASSERT could be used in some situations, such
as, there are some pre-assumption for some code, using ASSERT here for debug.
Tracked-On: #861
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@inte.com>
Use bitmap_set_nolock/bitmap_clear_nolock instead of
bitmap_set_lock/bitmap_clear_lock for the local variable.
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
-- add ept.h, and move ept related api declaration
from mmu.h to ept.h
-- move lookup_address()declaration from mmu.h to pgtable.h
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
move 'struct e820_entry' 'E820_TYPE_XXX' from mmu.h
to e820.h
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
move the following files to dm folder
renamed: include/arch/x86/guest/vioapic.h -> include/dm/vioapic.h
renamed: include/arch/x86/guest/vpic.h -> include/dm/vpic.h
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
The patch is to fix MISRA violation in reloc.c by:
- remove multi-returns in relocate();
- remove non useful checking in relocate();
- add suffix U to macro definition
Tracked-On: #861
Signed-off-by: Chaohong guo <chaohong.guo@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
1. in UEFI bsp code, not need UEFI macro; it is controlled in makefile.
2. in vm/acpi/interrupt code, unify the API name for SBL & UEFI.
3. remove unnecessary header including and unused code.
Tracked-On: #1842
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
In current code, there is a logic bug when inject low priority
exceptions.
If guest irq enabled, low priority exception will not be injected to guest.
This patch fix the logic error, if there is no eligible vector before
handling low priority exceptions, then inject low priority exception if
any.
Tracked-On: #2405
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Acrn doesn't support nested virtualization, so vmx operations should be
undefined opcode for guest.
Current code handle vmx operations with unhandled_vmexit_handler.
According to the spec, if guest execute vmx operation instruction, a #UD
exception should be inject.
This patch inject a #UD exception when guest execute vmx operation instruction.
Tracked-On: #2405
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
-- move vm_pic() from vm.h to vpic.c since it is
only used in vpic.c
-- move vm_ioapic() from vm.h to vioapic.c
change vioapic_reset(struct acrn_vioapic *vioapic) -->
vioapic_reset(struct acrn_vm *vm)
then vm_vioapic() is only used in vioapic.c
-- move vm_vuart() from vm.h to vuart.c,
now this api is used in vuart.c and shell.c
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Some arches have more than two IOMMUs, so change this limitation.
Tracked-On: #2435
Signed-off-by: Tw <wei.tan@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Fixed violations in vlapic_x2apic_pt_icr_access()
- Procedure has more than one exit point;
- Value is not of appropriate type;
- Narrower init conversion without cast;
- Implicit conversion: actual to formal param (MR)
Fixed violation in switch_apicv_mode_x2apic()
- No space between if, while, for and expresn.
Tracked-On: #861
Signed-off-by: Yan, Like <like.yan@intel.com>
For VM with local apic pt for realtime scenatios, we support virtio device with PMD backend.
But we still need to inject MSI to notify the front-end, to avoid changing the front-end drivers.
Since the lapic is passed through, irq injection to vlapic won't work.
This commit fix it by sending IPI with vector need to inject.
Tracked-On: #2351
Signed-off-by: Yan, Like <like.yan@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Since lapic is passed through, MSI/MSIx should be configured with the
vector allocated within guest OS, instead of physical vector allocated
in hypervisor.
Tracked-On: #2351
Signed-off-by: Yan, Like <like.yan@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
This commit extend lapic pass-through for DM launched VM, generally for hard RT scenarios.
Similar to the partition mode, the vlapic is working under the xapic mode at first, only
when x2apic mode is enabled, lapic is passed through, because the physical LAPICs are
under x2apic mode.
Main changes includes:
- add is_lapic_pt() to check if a vm is created with lapic pt or not, to combine
codes of partition mode and DM launched vm with lapic passthrough, including:
- reuse the irq delievery function and rename it to dispatch_interrupt_lapic_pt();
- reuse switch_apicv_mode_x2apic();
- reuse ICR handling codes to avoid malicious IPI;
- intercept ICR/APICID/LDR msr access when lapic_pt;
- for vm with lapic passthrough, irq is always disabled under root mode.
Tracked-On: #2351
Signed-off-by: Yan, Like <like.yan@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- vlapic_pending_intr() is called only for case no
APICv/VID(Virtual Interrupt Delivery) feature support,
in this case, there is no need to test VID case.
- remove 'apicv_pending_intr()' function.
Tracked-On: #2427
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
As we enable Interrupt Remapping, bit positions in IOAPIC RTEs
have a different syntax for programming. ACRN should handle original
format for vIOAPIC as well IR representation for physical IOAPIC.
This patch adds bit granularity IOAPIC RTE.
Tracked-On: #2407
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
As we enable Interrupt Remapping, bit positions in MSI address and
data registers have a different syntax for programming. This patch adds
bit granularity for MSI address and data structs.
Tracked-On: #2407
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
-- add header file ld_sym.h in include/arch/x86/boot/
-- move 'ld_bss_start/end' from cpu.h to ld_sym.h,
avoid reverse dependency
-- move 'ld_text_end' from mmu.h to ld_sym.h
-- move 'ld_trampoline_load/start/end' to ld_sym.h
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
The sos_vm config under arch/x86/configs/$(CONFIG_BOARD) folder should be
customer specific configuration, leave it back to customer.
When hypervisor start building, it will check whether BOARD specific sos_vm.h
exist in configs/$(CONFIG_BOARD) folder. If exist, then include this header;
if not, then include default sos_vm config header under configs/default folder.
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add a API to sanitize vm_configs[] array, in this API, we will do sanity
check for VM configurations and refill some fields in vm_configs[]. If
sanity check is failed, the HV would reject to boot.
About pcpu_bitmap of SOS_VM:
We should not hard code pcpu_bitmap for SOS_VM, this is not convenient for
unconfigured boards. The pcpu_bitmap follows a very simple rule:
All physical CPUs except ocuppied by Pre-launched VMs are all belong to
SOS_VM. In this way, the pcpu_bitmap of a SOS_VM is decided by pcpu_bitmap
status in PRE_LAUNCHED_VMs.
To get the correct pcpu_bitmap of SOS_VM, We need to setup another rule, that
the vm_configs[] array should follow the order of PRE_LAUNCHED_VM - SOS_VM
strictly.
With this patch enabled, the pcpu_bitmap field of sos vm config is not needed
to configure;
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
after compile, the compiled code could change rsp, so use pure asm code
to avoid such problem which will cause schedule switch failure.
Tracked-On: #2410
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
'vector' should be no greater than 0xff,else
'eoi_exit_bitmap[]' will overflow.
Tracked-On: #1252
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
below fields are defined but not used.
- sync, pause_cnt & dbg_req_state.
Tracked-On: #861
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
The array indexx of "vm_list" may be out of bound.
Updated the size of "vm_list"
Bug: ACRN-2544
Tracked-On: #2385
Signed-off-by: Manisha Chinthapally <manisha.chinthapally@intel.com>
Previously I/O emulation completion mode mode was configured in Kconfig:
config IOREQ_NOTIFICATION
bool "Notification mode"
help
When I/O request is completed, SOS will mark the completion status and
notify hypervisor via hypercall. Hypervisor will finish the post work
when notification is received.
config IOREQ_POLLING
bool "Polling mode"
help
When I/O request is completed, SOS will only mark completion status
without notifying hypervisor. Hypervisor will poll the completion
status and finish the post work.
Now move this configuration to guest_flags of acrn_vm_config struct.
if ((vm_config->guest_flags & IO_COMPLETION_POLLING) != 0U) {
I/O with polling;
} else {
I/O with notification;
}
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
There is a missing dependency between lib and bin in Makefile.
BTW, this issue is triggered by concurrent build.
Tracked-On: #2370
Signed-off-by: Tw <wei.tan@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
In write_trampoline_stack_sym(), when do relocation for pcpu's stack,
it wrongly adds an offset. As a result, during booting, when non-BSP
CPU (APs) tries to run trampoline code once they are waken up by BSP
via SIPI, system hangs.
Tracked-On: #2349
Signed-off-by: Chaohong guo <chaohong.guo@intel.com>
Reviewed-By: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Zide Chen <zide.chen@intel.com>
when relocation is enabled, the calcuation of HV size in init_paging
routine is not right. As a result, it doesn't enable NX bit for many
pages which don't belong to hypervisor text section.
Tracked-On: #2349
Signed-off-by: Chaohong guo <chaohong.guo@intel.com>
Reviewed-by: Zide Chen <zide.chen@intel.com>
In init_paging(), when modify page table, it does a round up to 2M on
the starting address of HV memory. If the address is not 2M aligned,
memory overwrite occurs, or memory attribute(cache, u/s) may be not
right. Besides, trusty memory (uos_sworld_memory) in .bss section is 2M
aligned during compiling, after enabling HV memroy 2M alignment, when
relocation is enabled, EFI stub or other loaders just needs to find a
2M-aligned starting addr for HV memory.
Tracked-On: #2349
Signed-off-by: Chaohong guo <chaohong.guo@intel.com>
Reviewed-by: Zide Chen <zide.chen@intel.com>
efi_ctx is passed by EFI stub to hypervisor. The memory was allocated
right after HV binary and marked as Efireserved. But HV is doing a 2MB
alignment in init_paging() and might overwrite the efi_ctx struct or
change the page table attribute. Now, EFI STUB uses Efiloaderdata type
memory and the memory can be re-use by hypervisor/sos after boot time
done. HV should save itself a copy if the content is still needed after
init_paging().
Tracked-On: #2349
Signed-off-by: Chaohong guo <chaohong.guo@intel.com>
Reviewed-by: Zheng, Gen <gen.zheng@intel.com>
-- fix "Macro parameter not in brackets" for PLUG_CPU(n)
-- fix "Array has no bounds specified" for vm_configs[]
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
This is the following patch after removing pending_pre_work, it make sure
all io emulation is done on its own cpu.
For hv emulated request, it follows the steps:
hv_emulate_pio->emulate_pio_complete
hv_emulate_mmio->emulate_mmio_complete
For dm emulated request, it follows the steps:
acrn_insert_request->dm_emulate_io_complete
while in acrn_insert_request, it could trigger scheduling out then resume by
hcall_notify_ioreq_finish, or busy wait for ioreq completion if polling mode
is enabled.
Tracked-On: #2394
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
Now we do not need pending_pre_work anymore, as we can make sure IO request
VCPU resume from where it paused.
Now only three fixed points will try to do schedule:
- vcpu_thread: before vm entry, will check reschedule flag and to it if needed
- default_idle: loop check reschedule flag to see if need switch out
- io request: if IO REQ need DM's handle, it will schedule out
Tracked-On: #2394
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
this patch added full context switch support for scheduling, it make sure
each VCPU has its own stack, and added host_sp field in struct sched_object
to record host stack pointer for each switch out object.
Arch related function arch_switch_to is added for context switch.
To benefit debugging, a name[] field is also added into struct sched_object.
Tracked-On: #2394
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
To support full context switch scheduling, each physical
CPU must have its own idle sched_obj.
Tracked-On: #2394
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
This patch adds the dependency of $(LIB_FLAGS) when building .out file.
So that the target is updated whenever there is a update in
debug/release library.
Tracked-On: #2389
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
For binutils <= 2.26:
'U' suffix for unsigned constant is not accepted by binutils assembler.
This patch separates the MACRO definition for ASSEMBLER
and non-ASSEMBLER code in idt.h
Tracked-On: #2200
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
separate the private macro/structure/functions, which are just used
in instr_emul.c;
and move instr_emul.h to public include path.
Tracked-On: #1842
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
The member of lapic_pt in acrn_vm_config will be replaced by
guest_flag of LAPIC_PASSTHROUGH;
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The member of bootargs in acrn_vm_config will be replaced by
acrn_vm_os_config struct.
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The member of mem_size and start_hpa in acrn_vm_config struct will
be replaced with the acrn_vm_mem_config struct;
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
For each vm_array[] item, its config is located in corresponding
index of vm_configs[], so vm_config pointer is not needed any more.
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
All the legacy cpu configration in vm_description.c are all cleaned up;
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The VM number configuration in description.c is never used, remove it;
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
We will use guest_flags of SECURE_WORLD_ENABLED to check wthether
sworld is supported.
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch creates a new get_sos_vm() api to replace get_vm_from_vmid(0U)
because VM 0 might not be SOS VM now;
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The patch will show correct VM name per its configuration. As we do not
validate vm id when call get_vm_from_vmid() any more, we only show VM's
states which their VM type are defined;
If VM name is not configured in config file, then the name is specified
with vm id, i.e. "ACRN VM_(vm id)"
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
When pcpu enter guest mode, it will call launch_vms() function to launch
VMs in global vm_configs array.
In launch_vms() function, current pcpu will go through vm_config array list
and check whether it is a bsp of configured VM, if yes then it will prepare
corresponding VM and start it. The index of vm_config array will be specified
to VM id.
The first least significant bit in pcpu_bitmap means the bsp of the VM.
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Under sharing mode, VM0 is identical with SOS VM. But the coupling of
SOS VM and VM 0 is not friendly for partition mode.
This patch is a pure term change of vm0 to sos VM, it does not change
any code logic or senmantic.
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
move this api from ept.c to io_emul.c to avoid
reverse dependency.
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
move this api from io_emul.c to vm.c to avoid reverse
dependency
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
to edge interrupt, like eth device, it can triger the interrupt again
when its IRQ in softirq entry queue or in timer list.
in current design, for sofrirq entry, it calls "list_del" before
"list_add_tail", to avoid the entry added twice.
so for interrupt delay timer, add to check if it is started
then just drop the next one; to avoid it enqueue twice.
Tracked-On: #2365
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Reviewed-by: Li, Fei1 <fei1.li@intel.com>
mptable pointer in acrn_vm_config struct and also extern struct mptable_vm1/2
declared in mptable.h are not used any more, remove them.
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- add new struct member for acrn_vm_config;
- add sharing_config.c file with initialized vm_config array;
- add SOS VM config header for apl-mrb/apl-nuc/up2 and dnv-cb2 board;
- and partition_config.c file with dummy vm_config array;
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch is a pure term change of vm_description to vm_config,
the struct name of vm_description is changed to acrn_vm_config.
The patch does not change any code logic or senmantic.
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Currently, we support SBL on two different boards.
So build and install them all in E2E build.
Tracked-On: #2344
Signed-off-by: Tw <wei.tan@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
Currently the SOS kernel will call hcall_set_callback_vector to config
the expected up-notification vector(0xF3) and then hypervisor uses the
passed vector to raise the interrupt to SOS when needed.
As sos kernel already switches to 0xF3 notification vector, the default
notification vector can be changed from 0xF7 to 0xF3. In such case it still
can work well even when the SOS kernel doesn't reconfigure the notification
vector.
Tracked-On: projectacrn/acrn-hypervisor#2355
Acked-by: Eddie Dong <eddie.dong@intel.com>
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
1. move the CR related code from vmcs/vcpu to vCR source files.
2. also add virtual_cr.h to acrn.doxyfile to avoid doc failure.
Tracked-On: #1842
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
-- Change acrn_vhm_vector to static, only used in io_request.c
-- Add set_vhm_vector() api, it will call this api instead of
acrn_vhm_vector except io_request.c
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- add definitions of all architectural MSRs
- add definitions of majority of non architectural MSRs
The non-architectural MSR definitions are specific to particular CPU model
or family.
e.g. MSR 0xE01 could refer to different MSRs in difference processors, and
in this patch, MSR_R0_PMON_BOX_STATUS is chosen without any particular reasons.
MSR_R0_PMON_BOX_STATUS in Xeon Processor 7500 Series
MSR_C0_PMON_EVNTSEL0 in Xeon E5 V3 family
MSR_UNC_PERF_GLOBAL_CTRL in 6th plus generations Core Processors
Tracked-On: #1867
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Split decode_prefixes() to 2 small APIs
v1-->v2:
split decode_prefixes to 2 APIs
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The MISRA-C Standards suggests procedures to be single exit
Tracked-On: #861
Acked-by: Eddie Dong <eddie.dong@intel.com>
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Because ACRN_REQUEST_TMR_UPDATE is not needed anymore, this commit remove
the MACRO definition and its related logic, including following functions:
- apicv_batch_set_tmr()
- vlapic_apicv_batch_set_tmr()
- vlapic_set_tmr_one_vec()
- vioapic_update_tmr()
Tracked-On: #2343
Signed-off-by: Yan, Like <like.yan@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This commit changes the EOI_EXIT_BITMAP as follows:
- add a eoi_exit_bitmap to vlapic structure;
- go through all the RTEs and set eoi_exit_bitmap in the vlapic structure when related RTE fields are modified;
- add ACRN_REQUEST_EOI_EXIT_UPDATE, if eoi_exit_bitmap changed, request the corresponding vcpu to write the bitmap
to VMCS.
Tracked-On: #2343
Signed-off-by: Yan, Like <like.yan@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Current ACRN implementation update TMR bits one time only when related RTE fields changed,
which is not acting like actual hardware.
From SDM vol3 10.8.4:
"Upon acceptance of an interrupt into the IRR, the corresponding TMR bit is cleared for
edge-triggered interrupts and set for leveltriggered interrupts."
This commit change the ACRN implementation to set/clear corresponding TMR bit when inject
intr to vlapic.
Tracked-On: #2343
Signed-off-by: Yan, Like <like.yan@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
On platforms that put ACPI RSDT in "Reserved" type memory, ACRN
fails to parse RSDP and therefore ACPI Tables. This patch adds
"Reserved" memory regions in E820 as Supervisor pages.
Tracked-On: #2320
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Refer to sha256 description to rename function name
Tracked-On: #861
Signed-off-by: Chen Gang G <gang.g.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
When we use script to analyze the latency between vm_exit and vm_entry,
it does not include the duration of vm_exit handler.
The patch moves the vm_exit trace before vmexit_handler.
v2: move vm_exit trace right after run_vcpu.
Tracked-On: #2341
Signed-off-by: Zhipeng Gong <zhipeng.gong@intel.com>
Reviewed-by: Yan, Like <like.yan@intel.com>
The struct vm_lu_mem_map is not used by code. Remove it.
Also, add bracks () for the variables in macro foreach_vcpu.
Tracked-On: #861
Signed-off-by: Chaohong guo <chaohong.guo@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
to meeting MISRA, add more bracks for if conditions; also a small
change to copy_gpa() to fix DD flow complaint from MISRA
Tracked-On: #861
Signed-off-by: Chaohong guo <chaohong.guo@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
In enable_msr_interception(), by removing the local pointer declarations and
all pointer arithmetic operations, the following violations are fixed.
- Use of pointer arithmetic.
- Pointer arithmetic is not on array.
- Pointer not checked for null before use.
Tracked-On: #861
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
1. to avoid data type cast when using 'global_rsdp'
2. other minor fix
Tracked-On: #861
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Condtional operators which will add code cyclomatic complexity. So replace the
unnecessary conditional operators.
Tracked-On: #861
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
An external object or function shall be declared once in one and only one file.
Since it already declared in include/arch/x86/security.h, we shall remove it.
Tracked-On: #861
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Commit 005546 introduces some functions like s0, s1, s2.
This patch renames `s1` and `s2` in string.c to avoid the name conflict.
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
The MISRA C stardand do not allow change parameter passed by value
Tracked-On: #861
Acked-by: Eddie Dong <eddie.dong@intel.com>
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
fix this violation "Value is not of appropriate type"
in get_kernel_load_addr()
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Signed integral type cast to unsigned. : (unsigned long and long)
Tracked-On: #861
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
120D: Pointer param should be declared pointer to const.
add 'const' qualifier to function signatures when it's possible.
- vioapic_set_irqline_nolock()
- vioapic_set_irqline_lock()
- master_pic()
- vpic_ocw2()
- vpic_ocw3()
- vpic_set_irqline()
- vpic_get_irqline_trigger_mode()
- vm_pic()
- vm_ioapic
93S: Value is not of appropriate type.
change '0' to '0U' in function vpic_icw1().
Tracked-On: #861
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Misra C requires Function must have only one return entry.
Tracked-On: #861
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
It always return zero, so there is no need to check the return vaule from it.
Just refine it to void.
Tracked-On: #861
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Header file shall not be included multiple times.
The following prototype shall be used.
#ifndef INIT_H
#define INIT_H
/* body */
#endif /* INIT_H*/
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
-Remove upper case
-Modify/fix code style violations
-fix value need U suffix
-Assignment operation in expression
-remove function like macros
v1->v2 fix assignment operation in expression
v2->v3 fix function like macros
Tracked-On: #861
Signed-off-by: Chen Gang G <gang.g.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
fix
1."Value is not of appropriate type."
2."Function prototype/defn param type mismatch"
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
120D: Pointer param should be declared pointer to const.
Add 'const' qualifier to function parameters whenever it's possible:
alloc_pci_vdev()
enumerate_pci_dev()
pci_scan_bus()
pci_enumeration_cb()
partition_mode_vpci_init()
partition_mode_vpci_deinit()
sharing_mode_vpci_init()
sharing_mode_vpci_deinit()
vpci_cleanup()
45D: Pointer not checked for null before use.
Check pointer vm in vpci_reset_ptdev_intr_info() before using it.
Tracked-On: #861
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
This will be consistent with naming of apl-mrb/kbl-nuc ...
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Merge separated mptable.c of BOARDs to unified vmptable.c;
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This is the profiling code cleanup to avoid type conversion
and align tab/space in data structure definition
Tracked-On: #2257
Signed-off-by: Min Lim <min.yeol.lim@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
There are the following definitions in hypervisor,
define IOAPIC_INVALID_PIN 0xffU
define VPIC_INVALID_PIN 0xffU
define PTDEV_INVALID_PIN 0xffU
this patch unify them to:
define INVALID_INTERRUPT_PIN 0xffffffffU
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Change the type from uint8_t to uint32_t for shell and vuart
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
-- Change the type from uint8_t to uint32_t
-- Remove some typecast
-- Change union source_id
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
-- Change the type from uint8_t to uint32_t
-- Remove some typecast
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
-- Change the type from uint8_t to uint32_t
-- Remove some typecast
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Change the type from uint8_t to uint32_t for interrupt pin
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
All features controlled by IA32_FEATURE_CONTROL are disabled from guests,
so set the Lock bit to prevent it from writing by guests.
Also hide the MSR_IA32_FEATURE_CONTROL_VMX_NO_SMX bit from guest.
Tracked-On: #1867
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
V1->V2:
rename is_exception_inject to has_exception.
V2->V3:
remove the else statement and add new if statement to check
has_exception.
Misra C requires not allowed to use goto.
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Silicon Debug Feature: CPUID.01H.ECX[11]
- We can't allow guests to have direct access to silicon wide resources.
Machine Check Exception: CPUID.01H.EDX[5]
- Need HV support before exposing it to the guests.
Perfmon and Debug: CPUID.01H.ECX[15]
Debug Store: CPUID.01H.EDX[21], CPUID.01H.ECX[2], CPUID.01H.ECX[4]
- HV emulation is needed to separate host and guest monitoring data.
- guest CPUID.0AH is forced to all-zero in ACRN so it makes sense to clear
these bits as well.
Tracked-On: #1867
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Typedefs that indicate size and signedness should be used in place of
the basic numerical types
Tracked-On: #861
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Misra C requires Function must have only 1 return entry.
Fixed it by use "if ... else ..." format.
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
* move `pci_pdev_calc_address` out of the spinlock in
`pci_pdev_read_cfg`
* remove the spaces before tabs
* make the line not over 120 characters
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
const dmar table is used for sbl board, and it can be
a single/independable file.
Tracked-On: #1842
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
1. add static for local functions and variables.
2. move vm_sw_loader from vcpu to vm
3. refine uefi.c to follow the code rules.
4. separate uefi.c for vm0 boot and bsp two parts. bsp layer just
access native HW related, can't access vm/vcpu, vm0 boot part can
access vm / vcpu data structure.
Tracked-On: #1842
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
-- Change boot_cpu_data to static, only used in cpu_caps.c,
-- Add get_cpu_info() api, it will call this api instead of
boot_cpu_data except cpu_caps.c
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
-- move structure 'cpu_state_info' from cpu_caps.h to host_pm.h
-- add get_cpu_pm_state_info() api
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
- rename biosacpi_search_rsdp() to found_rsdp();
- to make sure procedure has one exit point;
Tracked-On: #861
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
move MACRO of R_X86_64_RELATIVE into #ifdef CONFIG_RELOC block;
Tracked-On: #861
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- to make sure procedure has one exit point;
- add NULL pointer check;
Tracked-On: #861
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- remove goto;
- make sure procedure has one exit point;
Tracked-On: #861
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- remark unused MACRO;
- remove goto;
- make sure procedure has one exit point;
Tracked-On: #861
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
SMX should be disabled on guests.
Actually current code assumes SMX is disabled (no VM exit handler for GETSEC
and bit 2 of IA32_FEATURE_CONTROL is set), and this patch simply explicitly
clear guest CPUID.01H.ECX[6].
Since both CPUID.01H.ECX[5] and CPUID.01H.ECX[6] are cleared from guest CPUID,
MSR IA32_SMM_MONITOR_CTL is not available in guests.
Need to make sure CR4.SMXE is cleared in guests.
Tracked-On: #1867
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
SMRR (System-Management Range Register) is disabled from vMTRR,
so treat IA32_SMRR_PHYSBASE and IA32_SMRR_PHYSMASK as unsupported.
IA32_SMBASE is available only when IA32_VMX_MISC[15] is set.
IA32_FIXED_CTR0/1/2 are available only when CPUID.0AH:EDX[4:0] is non-zero.
Intel Processor Trace feature has been disabled and the associated MSRs
need to be in unsupported_msr[] as well.
Tracked-On: #1867
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
hypervisor/arch/x86/virq.c missed a new line at:
if (bitmap_test_and_clear_lock(...)) { vioapic_update_tmr(vcpu);
Tracked-On: #861
Acked-by: Eddie Dong <eddie.dong@intel.com>
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
remove few calls to return statement in routines.
Tracked-On: #861
Signed-off-by: Chaohong guo <chaohong.guo@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
To meet MISRA, remove multiple return in the func.
Tracked-On: #861
Signed-off-by: Chaohong guo <chaohong.guo@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
SBL doesn't support 40-pin header for now, so the serial PCI
device(0:18:1) on it doesn't work. Let's just workaround this by
changing hv's default serial output device to 0:18:0. In the future,
we'd rather change it back if SBL supports it.
This change is only for SBL, for UEFI, now we offer serial configuration
through command line parameter(vuart=...).
Tracked-On: #1995
Signed-off-by: Tw <wei.tan@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
-remove goto
-remove multiple return
-Modify assignment operator in boolean expression
-Modify/fix code style violations
-fix attempt to change parameters passed by value
-fix value need U suffix
-fix use of mixed arithmetic
-fix assigment in expression
-other fixes
Tracked-On: #861
Signed-off-by: Chen Gang G <gang.g.chen@intel.com>
Reviewed-by: Bing Zhu <bing.zhu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
-remove goto
-remove multiple return
-Modify assignment operator in boolean expression
-Modify/fix code style violations
-fix attempt to change parameters passed by value
-fix value need U suffix
-fix use of mixed arithmetic
-fix assigment in expression
-other fixes
Tracked-On: #861
Signed-off-by: Chen Gang G <gang.g.chen@intel.com>
Reviewed-by: Bing Zhu <bing.zhu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
-remove goto
-remove multiple return
-Modify assignment operator in boolean expression
-Modify/fix code style violations
-fix attempt to change parameters passed by value
-fix value need U suffix
-fix use of mixed arithmetic
-fix assigment in expression
-other fix
Tracked-On: #861
Signed-off-by: Chen Gang G <gang.g.chen@intel.com>
Reviewed-by: Bing Zhu <bing.zhu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
MISRA compaint that the vlapic_icrlo_write_handler 's cyclomatic
complexity is greater than 20. Try to remove multiple returns/exits.
Tracked-On: #861
Signed-off-by: Chaohong guo <chaohong.guo@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
To meet MISRA, remove few return in routines of vlapic.
Tracked-On: #861
Signed-off-by: Chaohong guo <chaohong.guo@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
To meet MISRA, remove some goto statements in guest.c
Tracked-On: #861
Signed-off-by: Chaohong guo <chaohong.guo@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
add @pre for routines and bracks for condition checking in vlapic.c
Tracked-On: #861
Signed-off-by: Chaohong guo <chaohong.guo@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
If a argment is not changed in function, MISRA recommends to add const
qualifier for that argement.
Tracked-On: #861
Signed-off-by: Chaohong guo <chaohong.guo@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The coding style of multiple returns/exit in while loop is not MISRA
compatible. Remove the returns in while loop.
Tracked-On: #861
Signed-off-by: Chaohong guo <chaohong.guo@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The static global variable apicv_apic_access_addr is used only by
vlapic_apicv_get_apic_access_addr(), to remove the warning by MISRA,
move it into function scope.
Tracked-On: #861
Signed-off-by: Chaohong guo <chaohong.guo@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The MISRA-C Standards suggests use brackets to clarify the precedence
order of logical conjunctions.
Tracked-On: #861
Acked-by: Eddie Dong <eddie.dong@intel.com>
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
move the debug related command handle into debug/dbg_cmd.c;
so release build will not include that.
Tracked-On: #2170
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
1. add an API to support vuart COM base and irq configured;
2. add the HV cmd to be parsed for vuart COM base & irq.
Tracked-On: #2170
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
add two static variables for COM_BASE & COM_IRQ, to
support them dynamically changed.
Tracked-On: #2170
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
move CONFIG_COM_IRQ code into vuart, because it is just
used for vuart.
Tracked-On: #2170
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
vuart it used for SOS to output log to HV console,
so if dbg uart is disabled, it need be disabled too:
just unregister its PIO.
Tracked-On: 2170
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
1) Use __attribute__((packed)) instead of #pragma pack(1)
2) Use the defined data type __packed instead of __attribute__((packed))
Tracked-On: #861
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
This patch fixes the remaining MISRA-C violations in arch/x86/assign.c
Tracked-On: #861
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Replace PAGE_SHIFT with MSI_ADDR_DEST_SHIFT in ptirq_build_physical_msi(), since it's not correct in semantics.
Tracked-On: #2209
Signed-off-by: Yan, Like <like.yan@intel.com>
-- Change pcpu_active_bitmap to static, only used in
cpu.c
-- add get_pcpu_active_bitmap()
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Profiling tools are broken, which cause page faults during collection.
The issue happens by enabling SMAP recently. Therefore,
we use stac() and clac() to allow access to buffers allocated by guest.
Tacked-On: #2157
Signed-off-by: Min Lim <min.yeol.lim@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Misra C requires Function must have only 1 return entry.
Fixed it by use "if ... else ..." format.
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
IO completion polling will access vcpu and vm structs. If doing it in
idle thread, there might be some race issues between vm destroying and
idle thread. They are running on different cores.
Got suggestion from Fengwei, decouple the polling action from idle
thread and just do it in vcpu thread, then we can guarantee idle thread
in really idle status.
Tracked-On: #1821
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Now, need_reschedule will test_and_clear the bit NEED_RESCHEDULE in
schedule context, then call schedule. It is not a exact match with the
name.
This patch move the flag clearing into scheudle, and need_reschedule
just check and return.
Tracked-On: #1821
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Two changes:
1. cpuid leaf 07h has subleaf:
According to SDM 3-194 Vol.2A, Table 3-8, cpuid leaf 07h has sub-leaves.
cpuid.07.eax reports the maximum input for sub-leaves.
Since there is no definition for subleaf > 0 in SDM, hv only supports subleaf 0.
2. In currently hv code, cpuid leaf function 14h is disabled,
CPUID.07H:EBX.INTEL_PROCESSOR_TRACE should be disabled as well.
Tracked-On: #2198
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Li, Fei1 <fei1.li@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Misra C requires Function must have only 1 return entry.
Fixed it by use "if ... else ..." format.
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Fix "Procedure has more than one exit point" by split the function into
two parts.
V1->V2:
compact the multiple lines into one.
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Fix the complicated violations by methods list below:
1.if ... else ... fmt.
2.add status in proper position.
example:
bool bdf_valid;(could find this variable in this patch).
V1->V2:
merge branches.
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch fix the violations by the "if ... else ..." fmt.
V1->V2:
merge branches.
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Fix violations that attempt to change parameter
passed by value.
Tracked-On: #2056
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
this function is not from libc but has the same name,
atoi() in libc is unbounded and not safe.
replace this function with 'strtol_deci()' in this case.
Tracked-On: #2187
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch mainly do the following:
- Make pic_ioapic_pin_map static const by MISRA-C's requirement.
- Make legacy_irq_to_pin and legacy_irq_trigger_mode static const as we will never change it.
Tracked-On: #861
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
This patch fixes the MISRA-C violations related to mmio_read**
* add `const` qualifier in implementation of mmio_read**
`const` qualifier shall be added
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Reviewed-by: Li, Fei1 <fei1.li@intel.com>
this patch fix following violations:
- Use of single line comment(s).
- Logical conjunctions need brackets.
- More than one break or goto statement in loop.
Tracked-On: #861
Signed-off-by: Tw <wei.tan@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
- bugfix:the actual 'size' of memory region that
to be updated is incorrect.
- replace CONFIG_UEFI_STUB with DMAR_PARSE_ENABLED
when update memory pages for ACPI_RECLAIM region,
as DMAR_PARSE_ENABLED may be enabled on non-EFI
platform.
V2 update:
wrap roundup to 2M and rounddown to 2M inline
functions.
Tracked-On: #2056
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Fix the violations list below:
1.Procedure has more than one exit point.
2.Use of sizeof on an array parameter.
3.Expression needs brackets.
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Misra C requires Function must have only 1 return entry.
Fixed it by use "if ... else ..." format.
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch fixes the MISRA-C violations in arch/x86/io.c
* make the for loop have only one `break`
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
cpuid leaf 0dh is percpu related, no need to init in vcpuid_entries for vm.
Tracked-On: #861
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- add API get trampoline_start16_paddr() instead
of exporting this global variable.
- other minor update.
Tracked-On: #2095
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The MISRA-C Standards suggests procedures to be single exit
Tracked-On: #861
Acked-by: Eddie Dong <eddie.dong@intel.com>
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
The MISRA-C Standards suggests not to use 'goto' instruction.
Tracked-On: #861
Acked-by: Eddie Dong <eddie.dong@intel.com>
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
1. keep symbols files for debug usage
2. they are saved when build for rootfs.
Tracked-On: #2168
Signed-off-by: Alek Du <alek.du@intel.com>
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
This patch does the following changes
According to VT-d spec Section 6.8 "Write Buffer Flushing" DRAM write buffers
are flushed implicitly upon Remapping Hardware Caches Invalidation even on
platforms that set RWBF to 1 in capability register. So removed write buffer
flushing as current ACRN issues cache invalidation commands in all cases.
Tracked-On: #1855
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
This patch fixes the duplicated functions introduced by cpu caps
modularization.
In cpu caps modularization, function `is_vmx_disabled` was supposed
to be moved from `arch/x86/vmcs.c` to`arch/x86/cpu_caps.c`,
but the original one was not removed.
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Remove the goto by split the function into two,
dispatch_hypercall and vmcall_vmexit_handler.
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The MISRA-C Standards suggests use brackets to clarify the precedence
order of logical conjunctions.
Tracked-On: #861
Acked-by: Eddie Dong <eddie.dong@intel.com>
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
The MISRA-C Standards suggests procedures to be single exit.
Tracked-On: #861
Acked-by: Eddie Dong <eddie.dong@intel.com>
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Table contents weren't rendered correctly in
developer-guides/hld/hv-io-emulation.html, so
fix the doxygen comments.
Tracked-on: #1684
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
According to SDM Vol. 2A 3-191 & Vol. 2A 3-213, leaf 02h has no subleaf.
This patch removes the un-needed code.
Tracked-On: #861
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Try to minimize the C code in inline assembly function. Now only
construct data structure and return a value is permitted.
Tracked-On: #861
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
This patch fixes the MISRA-C violations in arch/x86/cpu_state_tbl.c
* make the function have only one exit point
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch fixes the MISRA-C violations in arch/x86/ept.c
* add local variable if the input parameter passed by value
is changed in function definition
* remove the duplicated semi colon
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
now init_scheduler should belong to and move to hwmgmt module
Tracked-On: #1842
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <edide.dong@intel.com>
use struct sched_object as the main interface of scheduling, then
make scheduler as an independent module to vcpu:
- add struct sched_object as one field in struct vcpu
- define sched_object.thread for switch_to thread
- define sched_object.prepare_switch_out/in for prepare_switch before
switch_to
- move context_switch_out/context_switch_in into vcpu.c as
vcpu.sched_obj.prepare_switch_out/in
- make default_idle as global idle.thread for idle_thread
- make vcpu_thread as vcpu.sched_obj.thread for each vcpu thread
- simplify switch_to based on sched_object
Tracked-On: #1842
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <edide.dong@intel.com>
just use pcpu_id for make_reschedule_request is enough
Tracked-On: #1842
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Eddie Dong <edide.dong@intel.com>
add struct sched_object, and use it as input param instead of vcpu for
below functions:
- add_to_cpu_runqueue renamed from add_vcpu_to_runqueue
- remove_from_cpu_runqueue renamed from remove_vcpu_from_runqueue
- get_next_sched_obj added to get next sched object
Tracked-On: #1842
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <edide.dong@intel.com>
This patch fix MISRA-C violations in arch/x86/vtd.c
on Procedure has more than one exit point.
Tracked-On: #861
Signed-off-by: Tw <wei.tan@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
This patch fix MISRA-C violations in arch/x86/vtd.c
on Pointer not checked for null before use.
Tracked-On: #861
Signed-off-by: Tw <wei.tan@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
This patch fix MISRA-C violations in arch/x86/vtd.c
on logical conjunctions need brackets.
Tracked-On: #861
Signed-off-by: Tw <wei.tan@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
This patch fix MISRA-C violations in arch/x86/vtd.c
on pointer param should be declared pointer to const.
Tracked-On: #861
Signed-off-by: Tw <wei.tan@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
This patch fix the MISRA-C violations in arch/x86/vtd.c
on scope of variable could be reduced.
Tracked-On: #861
Signed-off-by: Tw <wei.tan@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
This adds few functions to access the daata structures
defined inside ioapic.c. Removes the same data structures
from ioapic.h
Also this modifies some of the names of existing APIs to
conform to the ioapic module name.
Modified gsi_table identifier to gs_table_data, to avoid
a MISRA C Violation.
Tracked-On: #1842
Signed-off-by: Arindam Roy <arindam.roy@intel.com>
This patch fixes the MISRA-C violations in arch/x86/vmexit.c
* make the function have only one exit point
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
1) add local_find_vcpuid_entry to find whether a cpuid leaf exist
in vcpuid cache entries.
2) find_vcpuid_entry will return the found entry if local_find_vcpuid_entry
return is not null. Otherwise, call local_find_vcpuid_entry again
when necessary.
In this case, there could eliminate recursion in find_vcpuid_entry.
Tracked-On: #861
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
1. change multi "return" to one exit.
2. add "U" to unsigned const as postfix.
Tracked-On: #861
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
acrntrace/log kernel modules will use this hypercall to fetch
pcpu num of hardware platform. Then, initialize driver accordingly.
Tracked-On: #1775;#1776
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Reviewed-by: Yan, Like <like.yan@intel.com>
-- fix "more than one exit point" and "goto detected" violations
-- change prepare_vm0_memmap to void type
-- Add free_vm_id when create vm failed
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Fixed three MISRA-C violations:
11S: No brackets to loop body
7C: Procedure has more than one exit point.
8D: DD data flow anomalies found.
initialize read_map and write_map in the declaration statements.
Fixed one bug:
Use "msr <= 0x1FFFU" instead of "msr < 0x1FFFU" because 0x1FFF is a valid MSR
bitmap address.
Tracked-On: #861
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
This patch fixes the MISRA-C violations in arch/x86/io.c.
* make the function have only one exit point
v1 -> v2:
* replace `ASSERT` with `pr_err`
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch fixes the MISRA-C violations in arch/x86/io.c.
* add the required brackets for logical conjunctions
* add the required 'else' for 'if ... else if' case
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
1) Fix procedure has more than one exit point.
2) Add some brackets to make logical conjunctions more readable.
Tracked-On: #861
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Now one macro is added to define the alignment requirement.
>#define __aligned(x) __attribute__((aligned(x)))
Some code uses the __aligned(x) to define the alignment while the other
code uses the original alignment definition.
So they are unified.
Tracked-On: projectacrn/acrn-hypervisor#2131
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
This patch fixes the MISRA-C violations on implicit type conversion.
For ptirq vpin source type, there is no need to define a enum.
Remove enum ptirq_vpin_source.
Define two macro:
- PTDEV_VPIN_IOAPIC
- PTDEV_VPIN_PIC
Tracked-On: #861
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
When adding ptirq entries, either successes with all number of entries added or
fails with none entries addes.
So remove added ptirq entries if error occurs during the process.
Tracked-On: #861
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch fixs the MISRA-C violations in arch/x86/assign.c
on multiple exits.
Tracked-On: #861
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
This patch fix the MISRA-C violations in arch/x86/assign.c
on potential null pointer deference.
Also add a break in case statement.
Tracked-On: #861
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch fixes the MISRA-C violations in arch/x86/assign.c
on implicit type conversion.
Tracked-On: #861
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch moves `atoi` and `strtol_dec` to debug directory
since they are only used by code under debug directory.
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
This patch fixes the MISRA-C violations in lib/string.c
* add the required brackets for logical conjunctions
* replace the basic type `long` with defined type `int64_t`
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
This patch fixes the MISRA-C violations in lib/string.c
* make the while loop have only one `break`
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
now PCI uart changed from MMIO configure to BDF configure,
it need change this interface too; this interface is used
to dynamically configure debug uart by HV command line.
Tracked-On: #2031
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
before PCI_BDF uses its hex value like "0xC2" for "0:18.2" to
configure, now use "0:18.2" directly to make it more readable
and easier to configure.
Tracked-On: #2031
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Clean the io_request.c's violations reported by the misra tools.
V1->V2:
remove violations which checked with NULL.
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This commit fixed following violations:
- Procedure has more than one exit point: free_irq_vector/request_irq/dispatch_interrupt
- goto detected: dispatch_interrupt
- Pointer param should be declared pointer to const: fixup_idt
- basic type declaration used: fixup_idt
Tracked-On: #861
Signed-off-by: Yan, Like <like.yan@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch fixes the MISRA-C violations in arch/x86/lapic.c, change local variable from
uint32_t to uint64_t to avoid potential numeric overflow.
Tracked-On: #861
Signed-off-by: Yan, Like <like.yan@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch fixs MISRAC violations in common/ptdev.c and include/common/ptdev.h
Tracked-On: #861
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
1) Separate ASM and C code inserts as pure procedures with a defined interface.
2) Fix procedure has more than one exit point.
Tracked-On: #861
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Gloabal variable should be declared constant wherever possible to avoid unintentional
modification.
Tracked-On: #861
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch fixes the MISRA-C violations in arch/x86/vmcs.c.
* make the function have only one exit point
v1 -> v2:
* update 'is_cr0_write_valid' and 'is_cr4_write_valid'
use `if ... else` rather than check 'ret' value
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch fixes the MISRA-C violations in arch/x86/vmcs.c
and arch/x86/vmx.c.
* add the required 'const' for pointer param if the object
pointed by the pointer is not modified
* remove the unnecessary cast on pointer
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch fixes the MISRA-C violations in arch/x86/vmcs.c.
* add local variable if the input parameter passed by value
is changed in function definition
* move the variable declaration inside function scope if
this variable is only used in one function
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch fixes the MISRA-C violations in arch/x86/vmcs.c.
* add the missing space before or after binary operator
* add the required brackets for logical conjunctions
* remove the redefined MACROs
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
We have used the option --ffreestanding to assert hypervisor
is a freestanding environment, and hypervisor does not include
standard library.
"-Wformat/-Wformat-security"
Check calls to the standard library functions printf and scanf, etc.,
to make sure that the arguments supplied have types appropriate to
the format string specified, and that the conversions specified in
the format string make sense. these flags disabled by -ffreestanding
or -fno-builtin.
Tracked-On: #1122
Signed-off-by: Tianhua Sun <tianhuax.s.sun@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
MIRSA-C requires the const qualifier should be applied to pointer parameters
that address data not subject to change in rule 120D.
Tracked-On #861
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
1. move out vm related code from arch/pm.
2. remove unnecssary global variables.
3. keep the global variables as static, not used
by other modules directlly.
Tracked-On: #1842
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Reviewed-by: Victor Sun <victor.sun@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
78D: Global variable should be declared const.
Global variables should be declared constant wherever possible to
avoid unintentional modification.
27D: Variable should be declared static
pci_ops_vdev_msi is not accessed by other files. Remove the declaration
from the header and define it with the static qualifier; Because it's
referenced by populate_msi_struct(), so move the define statements forward.
33D: No real declaration for external variable
certain variables are available in sharing mode or partition mode only,
so that the declarations in header files must be enclosed with
CONFIG_PARTITION_MODE
Tracked-On: #861
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
-- fix MISRA-C violation "procedure has more than one exit point"
for this api
-- change start_vm to void type since it is always return 0
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
1) Variable names shall start with a lower-case letter.
2) Multiplication and division come before addition and subtraction.
Everything else should be in parentheses.
Tracked-On: #861
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
No one uses it and it's some duplicated with strchr.
Tracked-On: #861
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
add get_ibrs_type API to get ibrs type.
this patch fix Misra C violation:
filename:/hypervisor/arch/x86/security.c function:None offset:19:
reason:Variable should be declared static. : ibrs_type
Tracked-On: #861
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
there are still some security related funcs in cpu_caps.c & cpu.c,
move them out into security.c.
Changes to be committed:
modified: Makefile
modified: arch/x86/cpu.c
modified: arch/x86/cpu_caps.c
modified: arch/x86/guest/vcpu.c
new file: arch/x86/security.c
modified: arch/x86/trusty.c
modified: arch/x86/vmx_asm.S
modified: include/arch/x86/cpu.h
modified: include/arch/x86/cpu_caps.h
modified: include/arch/x86/per_cpu.h
new file: include/arch/x86/security.h
Tracked-On: #1842
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
deinfe rule like below:
- must support TPR shadow and apicv access
- based on above, check apicv register support
- based on above, check virtual interrupt delivery and post
interrupt support
Changes to be committed:
modified: arch/x86/cpu_caps.c
Tracked-On: #1842
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
- we should not use print function before tsc setup
- is_ept_supported is internal API
- add is_apicv_supported to check apicv feature
- rename some functions to verb+obj format or better name
Changes to be committed:
modified: arch/x86/cpu.c
modified: arch/x86/cpu_caps.c
modified: include/arch/x86/cpu_caps.h
Tracked-On: #1842
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
has_monitor_cap is more suitable name
v2:
- rename to has_monitor_cap
Changes to be committed:
modified: arch/x86/cpu.c
modified: arch/x86/cpu_caps.c
modified: include/arch/x86/cpu_caps.h
Tracked-On: #1842
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
in cpu_caps.c, the vmx_caps & cpu_caps can be combined.
Changes to be committed:
modified: arch/x86/cpu_caps.c
Tracked-On: #1842
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
move cpu caps related functions like capability init/detect/check
in cpu.c & mmu.c into a new file cpu_caps.c
Changes to be committed:
modified: developer-guides/hld/hv-memmgt.rst
modified: ../hypervisor/Makefile
modified: ../hypervisor/arch/x86/cpu.c
new file: ../hypervisor/arch/x86/cpu_caps.c
modified: ../hypervisor/arch/x86/mmu.c
modified: ../hypervisor/arch/x86/vmx_asm.S
modified: ../hypervisor/include/arch/x86/cpu.h
new file: ../hypervisor/include/arch/x86/cpu_caps.h
modified: ../hypervisor/include/arch/x86/guest/vm.h
modified: ../hypervisor/include/arch/x86/mmu.h
modified: ../hypervisor/include/arch/x86/vmcs.h
Tracked-On: #1842
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- 'buffer'with size of 'buffer_cnt', will overflow in
next loop if 'index == buffer_cnt - 1'.
Tracked-On: #1252
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Misra C requires Function must have only 1 return entry.
Fixed it by use "if ... else ..." format.
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Fix violation "procedure has more than one exit point"
for this api.
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Use enhanced rep fast-string operation to refine memcpy_s.
And assume that the destination and the source would not overlap.
Tracked-On: #861
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
For security, this patch add one flag per vm and disable snoop control
for sos and enable snoop control for uos by default.
v2: add one flag in vm, not in iommu domain.
v3: add vm null check
Tracked-On: #2086
Signed-off-by: Zhipeng Gong <zhipeng.gong@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
13X: Identifier reuse: tag vs component.
A tag name shall be a unique identifier
Change the following names:
struct msi --> struct pci_msi
struct msix --> struct pci_msix
struct vpci --> struct acrn_vpci
union cfgdata -> union pci_cfgdata
Tracked-On: #861
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
vmx.c should only take care host vmx operations, which should not
contain vcpu reference, so refine vmx on/off APIs, move out use
of vcpu by adding one per cpu vmcs_run pointer.
as now each pcpu only run on one vcpu, so just keep running vmcs
in per cpu vmcs_run pointer is enough.
Changes to be committed:
modified: arch/x86/cpu.c
modified: arch/x86/init.c
modified: arch/x86/pm.c
modified: arch/x86/vmcs.c
modified: arch/x86/vmx.c
modified: include/arch/x86/per_cpu.h
modified: include/arch/x86/vmx.h
Tracked-On: #1842
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
remove no need included header files and macro definitions
Changes to be committed:
modified: arch/x86/vmcs.c
modified: include/arch/x86/vmcs.h
Tracked-On: #1842
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
one part is pure vmx operations which keeps in vmx.c
the other part is vmcs operations which is vcpu related, move them
into vmcs.c
Changes to be committed:
modified: Makefile
copied: arch/x86/vmx.c -> arch/x86/vmcs.c
modified: arch/x86/vmx.c
modified: arch/x86/vmx_asm.S
modified: include/arch/x86/hv_arch.h
new file: include/arch/x86/vmcs.h
modified: include/arch/x86/vmx.h
Tracked-On: #1842
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
